Izdelki za ventil (10)

Mini ball valve with wing BixBu PN 30 Narrowing passage brass chromeplated mini ball valve, on one side with BSP female thread and on the other side with BSP male thread according to ISO 228. PTFE seals around the ball and FPM Orings around the spindle. All taps have been tested for leaks for at least 24 hours. Make / type:Rub valves S.35 Maximum pressure:30 Bar Maximum temperature:120℃ Minimum temperature:-20℃ Sizes:1/8'' to 1/2'' Lever:plastic wing lever Connection:Indoor x Outdoor

Graco repair kit 24B768 for air valve Husky 1050A 1 x (202) PISTON 1 203 DETENT PISTON ASSEMBLY 1 x (204) CAM, detent 1 x (205) PLATE, air valve 2 x (206) O-RING 2 x (208) U-CUP 2 x (209) SCREW Kit 1 x (211) DETENT SPRING 1 x (212) BASE, cup 1 x (213) CUP 1 214 O-RING, cup 1 x (219) O-RING 1 x (108) GASKET, air valve 1 x GREASE, lithium-based

1x 330mm compression handle  3x pressure pieces  20mm  26mm  34mm DIMENSIONS:37 x 28 x 7,5 cm WEIGHT:1,7 kg

Mini ball valve with wing BixBi PN 30 Narrowing passage brass chromeplated mini ball valve, with BSP female thread on both sides according to ISO 228. PTFE seals around the ball and FPM Orings around the spindle. All taps have been tested for leaks for at least 24 hours. Make / type:Rub valves S.35 Maximum pressure:30 Bar Maximum temperature:120℃ Minimum temperature:-20℃ Sizes:1/8'' to 1/2'' Lever:plastic wing lever Connection:Indoor x Indoor

Brass Storz Coupling Female Thread Material:Brass Sealing:NBR Working pressure:16 Bar Connection:Female BSPP thread Diameter:3/4'' total 3''

Aluminum Storz Couplings Cover Cap Material:Aluminum Sealing:NBR Working pressure:16 Bar Connection:BSPP Female Thread Cam:31 to 160

3 x Extension screws (with Boll lock)  1 x Compression Bar (100mm)  1 x Spring Compressor C-clamp (297mm)  5 x Pusher adapters  16mm  19mm  23mm  25mm  30mm DIMENSIONS:32 x 21 x 5.2 cm WEIGHT:1.3 kg

Aluminum Storz Couplings Male Thread Material:Aluminum Sealing:NBR Working pressure:16 Bar Connection:BSPP Female Thread Diameter:3/4'' to 6''

1 x Sealing tongs 270mm  2 x Deep seal holders (diameter):  10.8mm  14.8mm  7 x Adapters;  5mm  5.5mm  6mm  6.5mm  7mm  8mm  9.5m DIMENSIONS:26 x 32 x 6 cm WEIGHT:1.6 kg

Brass Storz Coupling With Grommet Material:Brass Sealing:NBR Working pressure:16 Bar Connection:hose tail Diameter:25 mm tot 75 mm