Izdelki za ventil (4)

The FDABURML coupling module is a combination of an air valve and a fire damper, coupled with a single housing. This is an alternative to typeical fire valves. The main advantages of the FDABURML are better fire rating and a smaller size with more product configurations and application options. The main component of the coupling module is the CFDM fire damper. The fire damper is available in Ø 100, 125, 160, and 200 mm. The wing blade of the damper provides a very low resistance to the air flow. The fire damper can be ordered with one or two optional limit switches to feed back the actual blade position. The FDABURML coupling modules match the most popular versions of air supply or exhaust valves which can be replaced with one another, even with the coupling module installed in a partition or already in use. The entire coupling module is compact. As a result, the air valves with the mounting frames cannot exceed 50 mm in height.

Exécution: Poids (kg): 26,000 Dimensions (mm): 1946x272 Convient les marques et modèles suivants: CLAAS Tucano 430-420 CLAAS Tucano 450-440

FLXPLO / FLXPRO plenum boxes are components of the FLXREKU system intended for domestic mechanical ventilation systems, also known as mechanical ventilation heat recovery (MVHR) or heat recovery ventilation. The low profile plenum boxes require less installation space than standard solutions, which is very convenient when they should not be prominent once concealed. This advantage helps free up usable indoor area. FLXPLO plenum boxes are made of galvanized steel sheet. Plenum boxes made from stainless steel are available on request. Available also insulated plenum box version FLXPLI and FLXPRI. These plenum boxes have inside a insulation lining made from 9 mm thick rubber foam. FLXPLO plenum boxes are equipped with duct connection spigot Ød2 with a EPDM seal – this type of connection with FLXHDPE ducting is airtight and easy to install.

The FLXPLOEPPF plenum boxes are part of the FLXREKU air distribution system designed for domestic mechanical ventilation systems, socalled the MVHR system, to which an air valve and FLXHDPE / FLXHDPEA ducts with a diameter of Ø75 are mounted. Due to their small size, they do not require much space or special installation. This allows achieving a larger usable floor area of the room. The FLXPLOEPPF plenum boxes are made of expanded polypropylene, i.e. EPP, while Ø75 spigots are made of ABS. The material used allows obtaining an aerodynamic shape of the inside of the box which leads to low air resistance.