Izdelki za ventil (94)

DOUBLE FLANGED, ENGINE COMPATIBLE BUTTERFLY VALVE

The safety valve is designed to protect the silo from damage caused by high or low pressure encountered during discharge and filling.

ENGİNE CONTROLLED DOUBLE ECCENTRIC BUTTERFLY VALVE

TILTING CHECK VALVE

These valves have closure system in screen form by means of slide and connected to pipe lines and used for stopping fluid inside pipe. Screwed shaft which is mounted inside housing moves slide up and down and performs open and close operation for valve. Sealing is maintained by gasket which is coated over slide. They are used liquids which do not have abrasive property and in liquid fuel installations. They are not used for controlling and flow adjustment.

Router is a part type of connector and it is easier to remove and connect.

Cartridge is for collect the dust inside silo filter.

It makes the centering and foot distribution of the helix

Air accumulations which occur particularly in pump outlets when water is delivered to pump outlets and pipe lines and makes water flow area narrower and causes decrease in capacity. Double ball vacuum lifters are used for preventing this adverse issue and in locations where high efficiency is required. Air which occurs when water is delivered to system firstly fills into vacuum lifter and discharged through holes which are located at inner side covers. Then water fills into vacuum lifter and lifts ball up and holes are closed and sealing is maintained.

DISMANTLING JOINT

Loading Bellow, dry powder and granular the bulk raw materials in the structure reach the silo quickly, ensures dust-free and safe filling. Silo bass loading bellows during raw material loading It prevents the Körük dust from spreading to the environment.

As a sector; We serve General Machinery Manufacturing, Valve and Pump Manufacturing, Iron and Steel Rolling Mills, Railway Sector, Mining and Crushing, Energy Sector and Shipbuilding Sectors. As production; We produce castings in Unalloyed Carbon Steels, High and Low Alloy Steels, High Manganese Steels, Stainless Steels, Gray Cast Irons, Spheroidal Graphite (Sphero) Cast Irons, and Ni-Hard Casting Heads. Product Code:GS-45

Als Sektor; Wir bedienen den allgemeinen Maschinenbau, die Ventil- und Pumpenherstellung, Eisen- und Stahlwalzwerke, den Eisenbahnsektor, den Bergbau und die Zerkleinerung, den Energiesektor und den Schiffbau. Als Produktion; Wir produzieren Gussteile aus unlegiertem Kohlenstoffstahl, hoch- und niedriglegiertem Stahl, hochmanganhaltigem Stahl, rostfreiem Stahl, grauem Gusseisen, Gusseisen mit Kugelgraphit (Sphero) und Ni-Hart-Gussköpfen. Produktcode:GGG-60

Level Indicators are designed for electric signalling by rotary action of minimum or maximum material level inside bins, hoppers or silos.

As a sector; We serve General Machinery Manufacturing, Valve and Pump Manufacturing, Iron and Steel Rolling Mills, Railway Sector, Mining and Crushing, Energy Sector and Shipbuilding Sectors. As production; We produce castings in Unalloyed Carbon Steels, High and Low Alloy Steels, High Manganese Steels, Stainless Steels, Gray Cast Irons, Spheroidal Graphite (Sphero) Cast Irons, and Ni-Hard Casting Heads. Product Code:JL 1040/5.1301

Gücü Kalite Belirler..

Elzem-Wax Engine Valves that has ISO 9001-2008 -TUV AUSTRIA International Ouality Certificates continues to enlarge its market share through giving importance to customer satisfaction principle.

Hydraulic control valve groups needed by the users of FORD tractors, It is easily assembled to the hydraulic body. In operating state it modifies damper location in any position. It is double output or it may be single output if requested. THE MOST IMPORTANT FEATURE OF OUR VALVES; There may be dirtiness or metal and so on parts in oil circulating in the pistons, it will damage to the hydraulic brain of the tractor. In order to prevent this and to do no harm on the tractor’s brain, pressure oil coming out of the damper valvedirectly goes to the piston, but all the oil coming out of the piston do not go to the tractor’s hydraulic brain, the oil goes back to oil tank through separate output.

WAX MOTOR SUPAPLARI DIŞ TIC LTD STI

Üretim hattındaki Supaplar fırınlama sürecinde.

Als Sektor; Wir bedienen den allgemeinen Maschinenbau, die Ventil- und Pumpenherstellung, Eisen- und Stahlwalzwerke, den Eisenbahnsektor, den Bergbau und die Zerkleinerung, den Energiesektor und den Schiffbau. Als Produktion; Wir produzieren Gussteile aus unlegiertem Kohlenstoffstahl, hoch- und niedriglegiertem Stahl, hochmanganhaltigem Stahl, rostfreiem Stahl, grauem Gusseisen, Gusseisen mit Kugelgraphit (Sphero) und Ni-Hart-Gussköpfen. Produktcode:JL 1040/5.1301

Als Sektor; Wir bedienen den allgemeinen Maschinenbau, die Ventil- und Pumpenherstellung, Eisen- und Stahlwalzwerke, den Eisenbahnsektor, den Bergbau und die Zerkleinerung, den Energiesektor und den Schiffbau. Als Produktion; Wir produzieren Gussteile aus unlegiertem Kohlenstoffstahl, hoch- und niedriglegiertem Stahl, hochmanganhaltigem Stahl, rostfreiem Stahl, grauem Gusseisen, Gusseisen mit Kugelgraphit (Sphero) und Ni-Hart-Gussköpfen. Produktcode:JL 1040/5.1301

Mini valve for drip irrigation tape is made of high quality plastic. It is widely used in drip tape for irrigation system . Drip irrigation system valves are very easy to control water flow by mini valve.

Hydraulic control valve groups needed by the users of FORD. It is easily assembled to the hydraulic body. In operating state it modifies damper location in any position. It is double output or it may be single output if requested.

Elzem-Wax Engine Valves provides 2 years, 60.000 km warranty against to defects arising from material and producing.

It is used with router together with the gear milling side It is suitable for easy disassembly system. It is used in bearings on the drive gear and end bearing side.

Since end of 2011, Elzem-Wax Engine Valves that reached to annual 1.500.000 pieces product, exports its 40% production to domestic market, 60% production to USA, European, Middle East and African countries.

İt produces Intake & Exhaust Valves of diesel and benzene vehicles at high technology CNC and valve producing purposed automatic lathes in TSE 11147 standards.

Hydraulic control valve groups needed by the users of FIAT tractors, It is easily assembled to the hydraulic body. In operating state it modifies damper location in any position. It is double output or it may be single output if requested

168-219-273-323 Tube system End -bearing with Router.