Izdelki za ventil (2066)

Holding magnet for holding or clamping ferromagnetic workpieces. The DC-excited coil achieves a holding force of up to 30,000 N when energized. When the supply voltage is switched off, the workpiece to be held falls off. The holding solenoid is maintenance-free and are characterized by a low operating current at high holding forces. Nominal voltage:24 V Duty cycle:100 % Power consumption:2.2 W Holding force:112 N Design:round  Diameter:20x15 mm Holding permanentmagnetic?:no  Thermal class:B 130  Connection:free leads 200mm 

The new Vico MT series comprises powerful display units with multi-touch technology in an industrial-grade unit design.The installed CODESYS PLC software package makes it possible to use control functions in addition to visualization. The visualization is developed together with the PLC application in the free CODESYS Development System.The device communicates with the external fieldbus components via EtherCAT and Modbus.The devices with brilliant IPS display have a robust glass touch screen with an aluminium bezel and are prepared for easy installation in the control cabinet. All components are robust and have long-term available. Configuration:CODESYS HMI  Function:Multi-Touch HMI with control function Model:Panel mounted HMI  Product status:Standard product  Display:15.6" wide, IPS  Resolution:1366 x 768 / (16:9)  Processor:Arm® i.MX8M Mini ; 4 Cores ; 1.2 GHz  Operating system:Linux  Software:CODESYS V3 Soft PLC, TargetVisu, WebVisu  Main memory:1 GB Drive: 4 GB eMMC memory, 2 MB NOR Flash, µSD Slot Interfaces:2 x LAN, 2 x USB, 1 x RS-232  Field bus interfaces:Modbus RTU, Modbus TCP, EtherCAT, OPC UA  Housing material:Aluminum frame with glass front  Dimensions (W x H x D):405 x 254 x 60 mm  IP-Protection Class:IP 65 / IP 20  Supply voltage:24 V DC (± 20%)  Temperature range:0 ... +55°C 

CODESYS Starterkit HMI Extension Easy visualization. Each Kuhnke CODESYS Starterkit can easily be extended by a CODESYS HMI Touch display. Only connect the display to the Starterkit via an Ethernet cable, connect in with power supply and download a project on the HMI device. The programming, the connection of the program with the PLC as well as the steps to create an own visualization are explained in detail by several examples that can be downloaded comfortably in our download area. Function:CODESYS Starterkit HMI Extension  Model:Ready to use functional unit  Integrated function:Touchsccreen, TFT color display, IP 65 Front  Software:CODESYS HMI  Interfaces:LAN, RS-232 Field bus interfaces:HMI  Product status:Standard product 

La dérivation simple permet d’effectuer un piquage dans un réseau d’aspiration. Cette pièce est réalisé sur-mesure en fonction de votre besoin. Les informations suivantes sont à préciser : le diamètre du piquage (Ød2) et l’angle du piquage (30° ou à 45°) le diamètre de sortie (Ød3) Aussi, pour un meilleur rendement aéraulique, privilégier un piquage à 30°. Dimensions:350 mm Angle:30°, 45°

The digital Kuhnke FIO I/O modules relay the binary control signals to the actuators and analyze the input signals of the automation device galvanically separated from the process level. The Kuhnke FIO DI16 / DO16 module has 16 outputs, each output can be loaded with up to 0.5A. In addition the module offers 16 inputs with an input delay of 1ms. The primary and secondary sides of the module are separated by optocouplers. This galvanic decoupling makes it possible to switch off the supply of the outputs via only one safety component. The signal status of each channel is indicated by LEDs. The generation of a variant that supports distributed clocks is possible on request. ; 16 digital inputs for 24 VD with input filter 1 ms640 200 209 022 400; 16 short-circuit-proof outputs with output current up to 0.5 A; Status display locally assigned to the terminal point; Fast connection with PUSH-IN spring connection Function:Digital IN, Digital OUT  Model:Control cabinet modul  Digital I/Os (integrated):inputs: 16 DI 1ms / outputs: 16 DO 0.5A  Product status:Standard product  Field bus interfaces:EtherCAT  Type of connection:female plug with PUSH IN spring connection  Status indication:LEDs allocated to the point of termination  Housing material:Aluminium frame, plastic housing  Dimensions (W x H x D):25 x 120 x 90 mm  IP-Protection Class:IP 20  Supply voltage:24 V (-20% / +25%)  Operating temperature:0 ... +55°C  Immunity:Zone B according to EN 61131-2  Certifications:CE, UL 

La dérivation simple permet d’effectuer un piquage dans un réseau d’aspiration. Cette pièce est réalisé sur-mesure en fonction de votre besoin. Les informations suivantes sont à préciser : le diamètre du piquage (Ød2) et l’angle du piquage (30° ou à 45°) le diamètre de sortie (Ød3) Aussi, pour un meilleur rendement aéraulique, privilégier un piquage à 30°. Dimensions:250 mm Angle:30°, 45°

Valvola a sfera flangiata PN63 filettatura metrica in acciaio al carbonio zincotropicalizzato A350 LF2 a passaggio totale e dotata di dispositivo antistatico. Limiti di temperatura:-20° +160° Vuoto:10-3 torr

The fanless PLC with iMX6 Quad Core processor technology combines compactness with longevity and performance. The device has an integrated flash disk and an easily accessible SD card slot. USB interfaces allow the use of additional change-over memories or external peripherals.  ; Kuhnke controllers with CODESYS SoftMotion CNC+Robotocs provide the user with extensive project planning options for his motion tasks. Among other things, certified motion modules according to PLCopen and the full scope of the IEC 61131-3 programming interface are available, as well as integrated motion planning with coordinate values for robot positions in different coordinate systems and numerous supported kinematics with convenient configuration, e.g. various gantry robots (2/3/5 axes), bipod/tripod robots, Scara robots. ; Fanless  i.MX6-QuadCore processor technology ; Stable, compact housing, DIN-rail mounting ; CODESYS Soft PLC with WebVisu and SoftMotion CNC+Robotics Configuration:CODESYS Compact PLC  Function:Compact CODESYS PLC  Model:Control cabinet modul  Product status:Standard product  Processor:Freescale i.MX6X Quad Core; 1 GHz  Operating system:Linux RT  Software:CODESYS V3 Soft PLC, WebVisu, Softmotion CNC+Robotics  Main memory:1024 MB RAM  Non-volatile memory:Stored in flash memory  Data memory:SD-Karte / 4GB eMMC  Drive:Flash disk 256 MB  Interfaces:EtherCAT, OPC UA, CANopen, Modbus TCP/RTU  Field bus interfaces:EtherCAT, OPC UA, CANopen, Modbus TCP/RTU  Housing material:Stainless steel, heat sink made of aluminum  Mounting:DIN-rail mounting  Dimensions (W x H x D):50 x 190 x 115 mm 

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate Nominal voltage:24 V Duty cycle:100 % Power consumption:1.5 W Holding force:490 N Design:Plastic swivel head 150/175 mm  Connection:terminal clamp 

Le piquage permet de raccorder un tuyau sur un réseau existant. Il suffit d’ouvrir le tuyau du réseau principal et d’appliquer le piquage. Pour une parfaite étanchéité utilisez du silicone ou de la bande adhésive. Les options de personnalisation disponibles sur ce produit sont : le diamètre du piquage l’angle du piquage Dimensions:160 mm Angle:30°, 45°

Flat gripper with a neodymium magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has no hole and is usually glued or pressed in. Design:with threaded bush  Material:NdFeB  Force:60 N Diameter:13 mm Height:4.5 mm Weight:4.5 g Temperature:80 °C Housing:galvanized 

Clapet manuel avec joint permettant de fermer ou d’ouvrir manuellement un réseau d’aspiration tout en garantissant une parfaite étanchéité de celle-ci. Cela optimise le flux d’air de votre installation et donc la consommation énergétique de celle-ci. Ce type de clapet est idéal pour les buses de balayage ou pour les machines à bois traditionnelles. L’assemblage se fait à l’aide d’un collier de serrage, de la même manière qu’un tuyau standard. Pour ces raisons, les clapets manuels avec joint correspondent parfaitement au système d’aspiration industrielle ou aux petites menuiseries. Fonctionne bien pour l’aspiration de copeaux de bois, de PVC, de métaux ou de fumée de soudure. Enfin, ils sont disponibles du diamètre 80 mm au diamètre 350 mm. UGS:tmj-225 Dimensions:225 mm

La dérivation symétrique aussi appelé culotte symétrique permet de scinder un tuyau en deux réseau. Le diamètre et l’angle des dérivations sont personnalisables. Dimensions:300 mm Angle:30°, 45°

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate Nominal voltage:24 V Duty cycle:100 % Power consumption:1.5 W Holding force:490 N Design:Without base plate  Connection:Free leads 

This EtherCAT I/O module has been specifically designed with industrial environments in mind. Its IP 65 protection allows its installation anywhere at the machine making switching cabinets and further housings more or less redundant. You may mount the unit directly on a base plate. Due to the modules integral plug connector system, sensors and actuators are never far away from the modules. Standardised cable connections reduce mounting times while enhancing the security of the wiring. The IP65 EtherCAT I/O modules are intended for mechanical & plant engineering applications also in conjunction with systems other than those supplied by Kendrion Kuhnke Automation. Function:EtherCAT I/O IP65 digital  Model:Sensor Aktor Modul IP66  Field bus interfaces:EtherCAT  Digital I/Os (integrated):4DI 1ms, 8DO 0,5A  Analogue I/Os (integrated):AI1/Thermo3  Type of connection:M12, M8 Snap-In  Dimensions (W x H x D):80 x 160 x 24 mm

Le piquage permet de raccorder un tuyau sur un réseau existant. Il suffit d’ouvrir le tuyau du réseau principal et d’appliquer le piquage. Pour une parfaite étanchéité utilisez du silicone ou de la bande adhésive. Les options de personnalisation disponibles sur ce produit sont : le diamètre du piquage l’angle du piquage Dimensions:200 mm Angle:30°, 45°

Flat gripper with a neodymium magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a 8 mm threaded socket with an internal thread. It is characterized by a force of 140 N. The diameter is 20 mm, the total height of the flat gripper is 15 mm. Design:with threaded bush  Material:NdFeB  Force:140 N Diameter:20 mm Height:7 mm Total height:15 mm Diameter threaded bush:8 mm Thread:M4 Weight:17 g Temperature:80 °C Housing:galvanized 

Tuyau avec trappe de visite en acier galvanisé à bord tombés pour l’aspiration de copeaux. Longueur 0,5m. UGS:ttv-500 Dimensions:500 mm Diamètre section Ø (mm):500 Longueur (m):0,5m

Clapet manuel avec joint permettant de fermer ou d’ouvrir manuellement un réseau d’aspiration tout en garantissant une parfaite étanchéité de celle-ci. Cela optimise le flux d’air de votre installation et donc la consommation énergétique de celle-ci. Ce type de clapet est idéal pour les buses de balayage ou pour les machines à bois traditionnelles. L’assemblage se fait à l’aide d’un collier de serrage, de la même manière qu’un tuyau standard. Pour ces raisons, les clapets manuels avec joint correspondent parfaitement au système d’aspiration industrielle ou aux petites menuiseries. Fonctionne bien pour l’aspiration de copeaux de bois, de PVC, de métaux ou de fumée de soudure. Enfin, ils sont disponibles du diamètre 80 mm au diamètre 350 mm. UGS:tmj-100 Dimensions:100 mm

The permanent holding magnets achieve a holding force of up to 35,000 N in the de-energized state and are designed for long holding of magnetic workpieces. When the DC-excited coil is switched on, the permanent magnetic field on the holding surface is neutralized and the workpiece to be held can be removed. The electromagnet holds loads even in the event of a power failure and only needs to be energized briefly to release the workpiece. It is characterized by its energy efficiency and high holding forces. The permanent holding solenoids are available in different sizes with forces between 8 and 3,500 N. Nominal voltage:24 V Duty cycle:100 % Power consumption:6.2 W Holding force:260 N Diameter:32x40 mm Thermal class:E 120  Connection:free leads 200mm 

The Kuhnke CIO compact I / O combines various input and output signals on a PCB. The process data are transferred via the CANopen interface. The open and therefore low-cost version allows fast wiring and is predestined for the requirements in the apparatus construction. Function:I/O system with CANopen field bus Model:open circuit board for the control cabinet  Field bus interfaces:CANopen  Interfaces:CANopen  Digital I/Os (integrated):16 DI 5ms sourcing input / 16 DO 0,5A sinking output  Analogue I/Os (integrated):2AI, 2AO, 1Pt100  Type of connection:multi-pin plug connector  Dimensions (W x H x D):160 mm x 100 mm x 25 mm 

Valvola a sfera flangiata tipo Wafer in acciaio inox A351-CF8M, a passaggio totale, dispositivo antistatico. Limiti di temperatura:-20° +160° Vuoto:10-3 torr

The Kuhnke FIO Controller 116 CNC is a PLC based on i.MX6 with integrated CODESYS PLC. In addition to the POUs made available in CODESYS SoftMotion, CODESYS SoftMotion CNC contains POUs for CNC functionality, different kinematic transformations with the appropriate visualization templates and the robotics axis group editor. It is able to exchange data with other systems via industrial Ethernet and RS232. In addition, a built-in SD-card slot and a USB-interface allow local storage of process data. An interrupt input allows realizing fastest possible reactions on specific process events. Configuration:CODESYS PLC + SoftMotion CNC + Robotics  Function:Modular PLC  Model:Control cabinet modul  Product status:Standard product  Processor:i.MX6 SoloX Freescale 1 GHz  Operating system:Linux RT Software:Softmotion CNC, Modbus TCP, OPC UA Server, WebVisu  Software options:Modbus RTU, OPC UA Server  Main memory:128  Non-volatile memory:128 kByte  Data memory:SD card  Drive:Flash memory  Interfaces:LAN, USB, CAN, RS-232, EtherCAT-E-Bus  Digital I/Os (integrated):1DI, 1 ms  Field bus interfaces:EtherCAT, CANopen, Modbus RTU and TCP  Modular expansion:Expandable with FIO I/O modules  Housing material:Aluminium frame, plastic housing  Dimensions (W x H x D):25 x 120 x 90 mm 

The Kuhnke Vico 04 series is a powerful indicator with an industrial design for the realisation of modern operating concepts. The installed CODESYS HMI software package offers the possibility to visualise data from one or more CDESYS controllers on a remote Kuhnke Vico 04. The visualisation is developed either independently or together with the PLC application in the free CODESYS Development System. The Kuhnke Vico 04 series is based on a powerful ARM Cortex-A8 processor combined with a resistive touch display. All components are robust and have long-term availability. Configuration:CODESYS HMI  Function:Touch Panel, CODESYS V3 HMI  Model:Panel front Built-in unit  Product status:Standard product  Display:7" wide  Resolution:800 x 480, WVGA  Processor:ARM Cortex-A8 - 1 Ghz  Operating system:Linux  Main memory:512 MB  Drive:Flash Interfaces:1 x LAN, 1 x USB, 1 x RS-232/485/422  Housing material:Plastic with insert foil  Data memory:Flash disk 4 GB  Dimensions (W x H x D):187 x 147 x 34 mm  IP-Protection Class:IP 66 / IP 20  Supply voltage:24 VDC / (10 VDC … 32 VDC)  Temperature range:0 ... +55°C 

The new Vico MT series is a powerful display unit with multi-touch technology in an industrial-grade unit design. The installed CODESYS HMI software package makes it possible to visualise data from any CODESYS controller(s) on the remote Vico MT. The visualisation is developed either independently or together with the PLC application in the free CODESYS Development System. The devices with brilliant IPS display have a robust glass touch screen with an aluminium bezel and are prepared for easy installation in the control cabinet. All components are robust and have long-term availability. Configuration:CODESYS HMI  Function:Multi-Touch Panel, CODESYS V3 HMI  Model:Panel mounted HMI  Product status:Standard product  Display:15.6" wide, IPS  Resolution:1366 x 768 / (16:9)  Processor:i.MX8M mini Quad-Core CPU; 4 x 1.6 GHz  Operating system:Linux  Main memory:1 GB  Drive:4 GB eMMC memory, 2 MB NOR Flash, µSD Slot  Interfaces:2 x LAN, 2 x USB, 1 x RS-232 Housing material:Aluminum frame with glass front  Data memory:Flash disk 4 GB  Dimensions (W x H x D):405 x 254 x 60 mm IP-Protection Class:IP 65 / IP 20  Supply voltage:24 VDC (± 20 %)  Temperature range:0 ... +55°C 

The Kuhnke FIO Controller 116 is a PLC based on i.MX6 with integrated CODESYS PLC. It is able to exchange data with other systems via industrial Ethernet and RS232. In addition, a built-in SD-card slot and a USB-interface allow local storage of process data. An interrupt input allows realizing fastest possible reactions on specific process events. As far as mechanic properties and form factor are concerned, the controller matches the FIO I/O modules, which can be attached directly to form a mechanically and electrically homogenous unit. Using an additional extender module also the control of remote EtherCAT slaves is possible. It can be easily integrated by the number of interfaces (Industrial Ethernet, RS232, CAN) and supported systems into existing control concepts. ; Fanless ARM processor technology; To be extended with FIO modules; CODESYS V3 with EtherCAT®; Optional: CODESYS SoftMotion Configuration:CODESYS PLC  Function:Modular PLC  Model:Control cabinet modul  Product status:Standard product  Processor:i.MX6 SoloX Freescale 1 GHz  Operating system:RT Linux  Software:CODESYS V3  Software options:Softmotion light, Modbus TCP, OPC UA Server, WebVisu  Main memory:128  Non-volatile memory:128 kByte  Data memory:SD card  Drive:Flash memory  Interfaces:LAN, USB, CAN, RS-232, EtherCAT-E-Bus  Digital I/Os (integrated):1DI, 1 ms  Field bus interfaces:EtherCAT, CANopen, Modbus RTU and TCP  Modular expansion:Expandable with FIO I/O modules  Housing material:Aluminium frame, plastic housing  Dimensions (W x H x D):25 x 120 x 90 mm 

Valvola a sfera flangiata PN16, in acciaio al carbonio ASTM A105/A352-LCB brunito, a passaggio totale. ASTM-A105 Guarnizioni in PTFE vetro

With an EtherCAT master and two additional CANopen interfaces the new CODESYS control Scout from Kendrion can be used as a HMI and control unit. The simple CODESYS V3 programming ensures an efficient engineering. Furthermore, Scout has optionally 4 digital inputs and outputs. The embedded system is based on a scalable single or multicore i.MX6 processor technology combined with a TFT touch display. All components are robust and long-term available. Whether standard or customized the all in one solution is the better alternative in many devices and compact machines. ; The Scout series can be equipped with different software packages, please contact us for an individual offer. ; Industry standard interfaces ; Front with seamless film cover ; CODESYS V3, real-time clock Configuration:CODESYS panel PLC  Function:Touch Panel PLC  Model:Panel mounted device  Product status:Standard product  Display:12.1"  Resolution:800 x 600 (SVGA)  Processor:CPU Freescale i.MX6X Solo ; 1 GHz  Operating system:Linux RT  Software:CODESYS V3 Soft PLC, TargetVisu, WebVisu, Softmotion, SoftMotion CNC+Robotics  Main memory:512 MB RAM  Non-volatile memory:128 kB  Data memory:SD card  Drive:Flash disk 256 MB  Interfaces:2 x Ethernet 10/100/1000 MBit, 1 x RS-232, 1 x RS-485 galvanically isolated, 1 x CAN, 1 x CAN galvan Field bus interfaces:2 x CANopen, Modbus RTU, Modbus TCP, EtherCAT, OPC UA  Status indication:Power LED in the front, 4 x status on the back  Housing material:Aluminium with seamless film cover  Dimensions (W x H x D):320 x 265 x 54 mm  Status indication:Power LED in the front, 4 x status on the back 

Le piquage permet de raccorder un tuyau sur un réseau existant. Il suffit d’ouvrir le tuyau du réseau principal et d’appliquer le piquage. Pour une parfaite étanchéité utilisez du silicone ou de la bande adhésive. Les options de personnalisation disponibles sur ce produit sont : le diamètre du piquage l’angle du piquage Dimensions:150 mm Angle:30°, 45°

Le piquage permet de raccorder un tuyau sur un réseau existant. Il suffit d’ouvrir le tuyau du réseau principal et d’appliquer le piquage. Pour une parfaite étanchéité utilisez du silicone ou de la bande adhésive. Les options de personnalisation disponibles sur ce produit sont : le diamètre du piquage l’angle du piquage Dimensions:300 mm Angle:30°, 45°