Izdelki za ventil (4857)

Das 2/2-Wege-Membranventil GEMÜ 656 verfügt über einen wartungsarmen Membranantrieb aus Metall und wird pneumatisch betätigt. Das 2/2-Wege-Membranventil verfügt über einen wartungsarmen Membranantrieb aus Metall und wird pneumatisch betätigt. Es stehen die Steuerfunktionen „Federkraft geschlossen (NC)“, „Federkraft geöffnet (NO)“ und „beidseitig angesteuert (DA)“ zur Verfügung. Der Ventilkörper ist in Tiefsitzausführung gefertigt.-Hohe mechanische Festigkeit -Hoher Durchflusswert durch maximalen Innendurchmesser -Durchflussrichtung beliebig -Ventil reinigbar ohne Antriebsdemontage Typ: Membran Betätigung: pneumatisches Funktion: Steuerung Korpus: Doppelflansch,Gusseisen,EPDM,NBR Anzahl Wege: 2/2-Wege Weitere Eigenschaften: ANSI,normal geschlossen,doppeltwirkendes,Schließer,für hohe Förderleistung

Valvola di blocco a riarmo manuale, per Ossigeno, entrata dado Ch 19 (G 3/8” Dx F) uscita G 3/8” Dx M

The 6X multiport ball valve with pneumatic part-turn actuator (STANDARD) consists of two multi-way ball valves in a compact design arranged one on top of the other in a housing with two levels. There is no flow connection between the individual levels. With one switching process both media flows are synchronously distributed or collected using a common shaft. Unintentional mixing of the media flows is not possible. Control Pressure:6 bar

Nous fabriquons des filtres en cupro-aluminium, livrés bruts, ébauchés ou entièrement usinés selon les normes internationales de qualité

Les vannes cryogéniques servent à réguler le débit des gaz liquéfiés comme l'oxygène, l'azote, l'argon et l'hydrogène, à des températures très basses. Leur rôle est essentiel car elles garantissent un contrôle précis du volume de gaz qui circule. Ces vannes assurent un contrôle précis du débit de fluide, ce qui est essentiel pour la sécurité et l'efficacité de nombreuses opérations. Leur conception spécifique prend en compte les défis uniques posés par les températures très basses, notamment la contraction des matériaux, la lubrification à basse température et la prévention de la formation de givre. Dans des conditions cryogéniques, elles offrent une étanchéité hermétique et une régulation précise du débit de fluide. Les industries telles que la cryogénie médicale, l'industrie spatiale, la production d'énergie et la recherche scientifique dépendent des vannes cryogéniques pour garantir la sécurité, l'efficacité et la fiabilité de leurs opérations.

The valve assures maximum water level into tanks and reservoirs and avoids overflow. The valve operate by means of a modulating float, mounted on tank, able to regulate gradual opening of the valve when water level goes down from maximum.

Product Descriptions 1) TOTAL 12 Types : BUSHING, CAP, ELBOW, NIPPLE, PLUG, REDUCING NIPPLE, REDUCING, SOCKET, REDUCING TEE, SOCKET, TEE, THREADED UNION, WELDING, UNION 2) TOTAL 2 SIZE Types <SIZE 1 : CAP, ELBOW, NIPPLE, PLUG, SOCKET, TEE, THREADED UNION, WELDING UNION - 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"> <SIZE 2 : BUSHING, REDUCING NIPPLE, REDUCING SOCKET, REDUCING TEE - 3/4"x1/2", 1"x1/2", 1"x3/4", 1-1/4"x1/2", 1-1/4"x3/4", 1-1/4"x1", 1-1/2"x1/2", 1-1/2"x3/4", 1-1/2"x1", 1-1/2"x1-1/4", 2"x1/2", 2"x3/4", 2"x1", 2"x1-1/4", 2"x1-1/2"> 3) Applications - All stainless steel pipes, Hot and Cold water pipeline for industry - Fire water lines and waterworks, Oil pipelines 4) Materials : Stainless steel CF8 & CF8M 5) Working Pressure : 10bar (Maximum operation pressue : 20bar) Features -Twice higher corrosion resistance applied by the solution heat treatment - Uniquely designed to avoid damages by slip of tools

Der M 302 Gas ist ein 3-teiliger, silikonfreier und ausblassicherer Edelstahl-Kugelhahn mit Innengewinde, ISO 5211 Top-Flansch und Gas-Zulassung. Größen 1/4" – 2“, Nennweiten DN 8 – DN 50

Brass Valve,Gas Valve,Oven Valve,Oven Part,Stove Part,Gas Spare Part

IBC discharge valve with 90° hose nozzle and sealing cap. The hose can also be closed with the enclosed sealing cap. Hose nozzle external PA Ø 30 mm, suitable for flexible hoses. The IBC discharge valve is a sturdy, high-quality ball valve with a hose connection and connection adapter including seal, for standard thread S 60x6 external or 1" external, designed to fit all commonly used European IBC containers. With the appropriate thread, the discharge valve can also be screwed directly onto the original discharge valve that is already on the IBC tank if the original valve is leaking or faulty. In this way the IBC discharge valve ensures fast and reliable residual emptying of the container with good dosing. The discharge valve is an indispensable accessory to ensure a professional connection of the hose or for filling from your IBC container. Max. operating pressure:10 bar (at +20 °C) Max. operating temperature:80 °C

14.32.0 ISO-Flansch 14.32.1 Handhebel, einrastend 14.32.2 Schneckengetriebe 14.32.3 Schwenkantrieb 14.32.4 Schwenkantrieb MVEN Magnetventil, Endschalter 14.32.5 Elektroantrieb 3-teiliger Zwei-Wege Kugelhahn BKKH 14.32.0 – 5: • Anschluss Innengewinde, • voller Durchgang Nenndruck PN 16-40 • Baulänge BK-Werksstandard Betätigungsflansch ISO 5211/ Namur Betätigung: manuell, pneumatisch, elektrisch

JOINT DE BRIDE ET BOUCHON MACON PVC COMPRIS Référence:A1010S Matière:Laiton

Double Plate Check Valve / Body : GG-25 Cast Iron (EN GJL 250) / Disc : Ductile Iron (EN GJS 400-15) / Max. Working Temp. : 110 ºC / Max. Working Pressure : 16 Bar *** Applications Area : Hot and Cold Water Systems / Irrigation and Water Supply Lines / Purification System and Waste Water Discharge / Fire Protection Lines / Oil- Cooling Cycles Conformity :EN 12334 Nominal Diameter DN:DN50-DN250

Subsea Dn 16” ANSI 900 - with Hydraulic Actuator

Drehteile / Baugruppe / Druckventil aus 11SMnPb30C mit gehärtetem Kolben (verzinkt) ROMMEL Präzisionsdrehteile GmbH begeistert mit der Fertigung von hochwertigen Drehteilen aus VA / Niro, NE-Metallen und Stahl – und das schon seit 3 Generationen! Ein Grund dafür ist, dass wir bei all unseren Arbeiten einen besonders großen Wert auf zuverlässige und pünktliche Ausführung legen. Wir fertigen komplexe Drehteile zwischen Ø 12 mm bis Ø 65 mm in Serien von ca. 100 - 30.000 Stück.

Brass solenoid valves indirectly controlled for air, gases, steam and non-aggressive liquid media. In the sizes 1/4" to 1", as 2/2 and 3/2 Valve available in NC or NO in all common voltages and various sealing materials.

Robinet à soupape en acier ou en fonte ou en inox Pièces internes inox ou autre type droit commande par volant Raccordement à brides suivant DIN ou ANSI ou à manchons taraudés ou à souder Variante : à soufflet, avec clapet de réglage, type incliné (équerre), 3 voies, contacts stellités. Couple press / temp suivant vos conditions de service Diamètre nominal sur demande Pression nominal sur demande Utilisation Isolement tout ou rien, réglage approximatif pour vapeur. Normes Manoeuvre par volant ou par actionneur pneumatique ou électrique

Our mechanical PEKI valve series has been manufactured for decades from high-quality hot pressed parts and precision turned parts, which are assembled with modern injection moulded parts and sealing elements from German production. PEKI valves can be manufactured according to customer requirements in construction length, material of the seal as well as in chemical nickel plating. Material:Brass/Chem. nickel plated/VA Seal:NBR – EPDM – VITON Max. Temperature:70°C – 100°C – 100°C

Due to their special design, 100 % free passage and low flow resistance, STRATE AWASTOP non-return valves are ideal for: Sewage technology, media with solids and coarse solids, sludge (up to 5 % TM) Fresh and service water technology, including in areas where high pressure losses make powerful pumps necessary On request: pumping of fluids deviating from the media listed Areas where quiet operation is particularly important Non-return valves are recognised all over the world as for universal applications in the pumping of fresh water, effluent, sludge and air. Stand for high operational safety Stand out thanks to their excellent value-for-money and low maintenance requirements 100 % free passage Low flow resistance Quiet operation thanks to the inclined valve seat which shortens the closing distance Minimum clogging tendency through optimum hydraulic design− Fail-safe closing of the valve since the closing element is fixed securely into the valve cover DN:50 - 300 PN:10 Housing:EN-GJL-250 (GG 25)

PVC-U, PVC-C, PP & PVDF Kugelhähne mit Sicherungsgriff in Industrieausführung. DN 10 - DN 100. Dichtungen in EPDM oder FPM. Handbetätigt, elektrische oder pneumatisch gesteuert

Pulse Valve, 1/8” &amp; #10-32 Ports See Catalog: Page 166 Additional Information Exhaust hole to atmosphere Max PSI 150 psig Ports 1/8

The accsessories for machines.

Brand Services sprzedaje zawory oraz siłowniki niemieckiej firmy Airpower Europe w Polsce. Asortyment: Siłowniki pneumatyczne Siłowniki ze stali nierdzewnej Zawory kulowe Zawory motylkowe Zawory grzybkowe Zawory odcinające Pozycjonery

Einsatz Miniaturisiertes 3/2-Wege Cartridge Ventil in der 8 mm Spider Baureihe. Dieses wird als pneumatisches Vorsteuerventil verwendet oder für direktgesteuert zur präzisen Dosierung von Gasen oder Flüssigkeiten. Nutzen Dieses sehr kompakte Ventil eignet sich zur direkten Montage in einen Ventilblock. Alle pneumatischen bzw. hydraulischen Anschlüsse können hierbei im Ventilblock integriert werden. Nennweite::0,5 – 1 mm Druckbereich::2...8 bar Leistungsaufnahme::0,55 W Medium::Druckluft Ventilkörper::Edelstahl

- material (pipe connection): stainless steel - material (valve housing): aluminium - material (slide plate / via hole): PET / stainless steel - compressed air supply: 1/8"; 6 bar; oil-free and dry - power supply: 24 V DC The pneumatic fittings and the magnetic valve are complete assembled. One pneumatic adapter (6 and 8 mm) is enclosed. The via hole is power-off open. Ø P B L H AS.20.040.F.024V 40 1/8" 74 414 196 AS.20.045.F.024V 44.5 1/8" 84 440 232 AS.20.050.F.024V 50 1/8" 84 440 196 AS.20.060.F.024V 60.3 1/8" 94 456 206 AS.20.076.F.024V 76.1 1/8" 118 545 257

Mehrwegekugelhahn mit positiver Überdeckung L-,T- u. LL-Bohrung des Kugelkükens DN [mm] 15 – 100 | NPS [in] ½ – 4 PN [bar] 16 – 40 | Class [lb] 150 – 300 T [°C] -50 + 600 | T [°F] -58 +1112 Baulänge EN 558-1 | Face to Face ANSI B 16.10

Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, angle seat valves, butterfly valves as well as solenoid valves, pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as well as dirt strainers, safety valves and pressure limiting valves.

SCHÜTZE spray valve KA 2 PEEK The automatic spray valve KA 2, made from PEEK, has a weight of 35 gram! only. Also fluids, which may react with metallic materials, could sprayed with this valve made from PEEK.

Spindle extension for service valve (SQ12), Type: Rigid, round steel

RQ Valves VP 9100 / 9101 XE Valve XL 3000 Valve Sampling Valves XP Valves Cybertron Valve PSD2/3 Valve Valve KL0 802 All Valves are available in a variety of inert materials like Plug Material Body Material PTFE PCTFE PTFE PEEK UHMWPE PCTFE UHMWPE PEEK If you don't find your valve please ask us for a customized development.