Izdelki za ventil (4857)

Riduttore di alta pressione in ottone con manometro. Uscita portagomma GPL

The 5A shut-off valve is available in a number of variants – straight design or angle design. The flow of the media is reliably shut-off by threading in the spindle. It is equipped with a female thread on both ends, has a low-wear valve seat, and each valve undergoes a tightness test in accordance with DIN 3230. Tightness Test:DIN 3230

Throttle valve type RIA Use: RIA is specially designed for use for flue and exhaust gases up to 1100°C. Depending on specifications, we can supply RIA in various, ready-made configurations, or we can adapt it to precisely suit your specific needs. RIA has an Integrated ISO interface. This allows for direct mounting without the need for an additional console – which means the RIA can be automated quickly and easily later on. RIA is very robust, durable and requires little maintenance. With its safe and proven design, RIA guarantees high system availability even under extreme conditions.

Valvola a sfera Split Body [Valpres art. 765001] flangiata PN16, in acciaio al carbonio WCB, passaggio totale, con connessione organo di comando ISO 5211, scartamento secondo norma EN558 basic series 27, Fire Safe, dispositivo antistatico.

Einteiliger Kompakt Kugelhahn Flanschanschluss, voller Durchgang Abmessung (DN - Zoll): DN 100 (4")

Applications: Industrial Combustion Technology / Renewable Energy Technology / Environmental Technology / Industrial Furnaces One-piece body, centric disc Operating temperatures up to 620°C, depending on material selection Wafer type body for flanges according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47 Face-to-face length according to manufacturer’s standard Mounting flange for actuators according to DIN EN ISO 5211

Clapet antiretour bouts lisses Joints EPDM Inox 316L Dimensions disponibles:du DN25 au DN104 Norme:CE 1935/2004 PMS:10 bar Température:-20°C à +130°C Sur demande:joints FKM EXEMPLE DE COMMANDE:661411-25SG

Im-gal Modulating Type Float Control Valve Max/min Level

8 Valve, Elec Mfld Card, No Valves w/Mntg Hardware See Catalog: Page 192, Page 193

Flap valves for petrol or oil lines. The valves prevent the line from draining after the pump has been switched off

Bundspindeln aus 1.4057 oder 1.4021 mit gewalztem oder geschnittenem Gewinde bis Nennweite DN600

Telescopic Spindle Extension T2 for gate valves. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304). Square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques according to GW336. Two-piece PE protection tube system with a bonded centring cap, universal bell and sealing. Completely dirt-proof and waterrepellent. Optional: Marking disc (double sided gas and water) as well as bell adapters/sealing inserts.

Schaltfunktion: 3/2 Wege, 2/2 Wege Schaltfunktion:: 3/2 Wege, 2/2 Wege Zustand stromlos:: NC (stromlos geschlossen), NO (stromlos geöffnet) Betriebsspannung:: 6 V DC, 12 V DC , 24 V DC Dichtungswerkstoff:: Dichtelement NBR Spannungstoleranz:: ± 10 % Umgebungstemperatur:: - 10 °C bis + 50 °C (+ 70 °C auf Anfrage) Relative Einschaltdauer:: 100 % Ein-/Ausschaltzeit nach ISO/CD12238: nach ISO/CD12238 nominal 5 ms/6 ms Thermische Klasse der Isolierstoffe nach DIN VDE 0580:: F Schutzart nach EN 60529:: IP 00 Schutzklasse: 3 Mediumqualität nach ISO 8573-1:: Druckluft der Qualitätsklasse 3, 3, 3 Einbaulage:: beliebig (vorzugsweise Ankerausrichtung senkrecht)

Material : standard ASTM, JIS, DIN, BS 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

High-pressure systems can be automated easily and effectively by using Nova Swiss valves with air-operated actuators. The valve bodies and packing systems are identical to those in the manual valves and provide the same benefits. The extremely robust and reliable air-operated piston actuator is available in two versions: ATO (air-to-open), opens with compressed air. ATC (air-to-close), closes with compressed air.

Entlüftungsventil PVC EPDM 3/8" DN10, Gewindemuffe, Art.Nr.: 522.23.0.1.010

We manufacture rough or fully machined body and flange for 3 pieces ball valves in : • Austenitic stainless steel Alloys (CF8M, CF3M…) • Aluminium-Bronze (UNS C95500…) • Duplex and Super Duplex (CD4MCu, CD3MN…) • Nickel-based and high-alloys (CW-6MC, CU5MCuC, M-35-1 CW-12MW…) • Martensitic alloys (CA15, CA6NM…) • Other materials on request

Corps 2pc avec boule fixe/2pc body with trunnion ball

The European Drinking Water Directive 98/83/EC describes water as our most important good and thus highlights the importance of its protection. Drinking water is of high value as it has a direct impact on human health. For drinking water installations, that means that planning, construction and operation of a drinking water system should not cause illnesses due to mistakes or errors. A regular test for drinking water is prescribed in the Directive 98/83/EC. All member states need to adopt these regulations and should have adjusted them to the state's specific needs and conditions. — made of lead-free brass for sampling all chemical and microbiological parameters — rotable around 360° — chemically and thermally desinfectable/ deflagratable — easy installation — vertical sampling in all installation positions — lead-free body — incl. adapter to 3/8" male thread Material:lead-free brass Inclusive:adapter to 3/8" male thread

Innovacera ceramic metering pump is widely used for many famous brand filing machine. We can make customized shape and size of ceramic filling pump according to clients design request. Product Application: Applicable in quantitative subpackage with high level of hygienerequirement like injection oral liquid etc. Widely applied to pharmaceutical equipments of famous enterprises BOSCH, B+S, IMA, GROENINGER, INOVA company and Trucking Technology, Miaxis, Qianshan etc. CERAMIC FILLING PUMP FEATURES: Liquid non-polluting, High precision Long service life, Very high surface finish High hardness, Wear resistant Particle release is extremely small Water absorption as low as zero Minimal friction, Minimal residual Low thermal expansion coefficient Inert Chemical stability, Acid corrosion resistance Resistant to high temperature, Piston clearance fit more Filling accuracy can be achieved online cleaning and sterilization

Hoogwaardige vlinderklep met schroefogen, verwisselbare seat. Verschillende uitvoeringen voor behuizing, seat en klepblad. Handmatige of geautomatiseerde bediening.

Dispositif intermédiaire avec fonction de soupape de ventilation pour des réservoirs. Le montage s’effectue de préférence dans desconduites. Peut être utilisé comme soupape de surpression ou de dépression. Aussi utilisable comme protection anti-retour ou soupape de décharge.

Edelstahlkugelhähne

Größe 10 Dropsa 3083443 z.B. für Ergomat Maschinen ARTIKELNUMMER:5153860 HERSTELLER ART-NR:ERG911698

Valvola a sfera sgrassata a passaggio totale, filettatura F/F, con leva in alluminio, per ossigeno non medicale. Limiti di temperatura:-20°C +80°C

Edelstahlguss: T3-Y-4408, 120° Y-Flanschstellung, Kugel: 120° L-Bohrung, DN15 - DN250, PN16 120° Y-Flanschstellung, voller, runder Durchgang, ausblassichere Spindel, angefederte Spindelabdichtung, 120°L-Kugelbohrung, drei Kugelsitze, allseitig dichtend, nicht überschneidungsfrei, Anti-Static-Device, "fiire-safe"- Konstruktion, DIN/ANSI-Flanschanschlüsse, 120°- Handhebel, Flansch für Antriebsaufbau gemäß DIN ISO 5211, TA-Luft-Zertifikat nach VDI 2440, CE-Konformität nach DGRL.

Exakte Regelung mit gleichprozentiger Kennlinie von flüssig- und gasförmigen Medien

The Hartmann Twin Ball Valve (TBV) provides a double line barrier and enables a significant increase of safety without much effort. Designed for applications with especially high safety requirements, the TBV consists of two integrated ball valves, which can be equipped with two independent barriers each. Thereby the safety can be raised by factor 4 compared to a standard valve. With the Double Isolation and Bleed function each ball valve seals both at the upstream and downstream side. With the so-called „studded“-design, meaning a closed flange form, the valve has the length of a single standard valve and affords a compact and economic alternative for the application of multiple valves. The TBV comprises – like all Hartmann valves – a pure metal-to-metal sealing system between ball and seat ring. With this sealing system leakage rates A, respectively 0, can be fulfilled. Furthermore, it is characterized by an outstanding longevity and low maintenance requirements.

CNC machining parts, CNC turning parts, CNC milling parts,Aluminium Housing, Flange, Valve Seat, Bush, Sleeve, Mechanical Parts for electronic devices,Mechanical Engineering Service, stamping parts, sheet metal parts, Cnc machining parts from China, Anodized Aluminium Milling part, Stainless Steel shaft, Titanium mechanical parts, Aluminium Enclosure, Aluminium turned lens in black anodize finish,stainless steel valve, copper machined plate, brass bush, brass sleeve, brass nut in nickel plated,copper screws, red anodized aluminium holder, blue anodized aluminium CNC milling plate, anodized mechanical parts, copper gold plating handle, zinc plated screws, custom made CNC turned part,ShenZhen mechanical parts supplier, critical cnc machining parts, precision mechanical parts, mechanical parts for camera, Stainless steel high polishing part, pump and valve mechanical accessories, Optic mechanical products, High quality precision machining parts, Nitrating steel shaft,machined mechanical

Our universal construction kit with a variety of connections combines the latest technology with the best userfriendliness. Triclamp, milk pipe thread, inside thread and various customer versions as well as FDA / ATEX certification meet all requirements. TriClamp ½", ¾", 1”, 1¼", 1½", 2" DN15, DN20, DN25, DN32, DN40, DN50 housing, not in contact with medium:aluminium alloy 6026 Tri-Clamp:stainless steel 1.4435 / 1.4404 screws:stainless steel A4 sleeve:as selected