Izdelki za ventil (4857)

Regolatore BP a taratura variabile, capacità 0,8Kg con entrata M 16x1,5 LP144C28:25 ÷ 70 mbar * - A:Uscita portagomma * - H:Uscita M 1/4”

Replacement Button for PB-1, Green

Dispositif de bout de ligne pour les ouvertures à des réservoirs. Utilisé surtout comme dispositif de ventilation pour des réservoirs à toit fixe. Pour éviter des surpressions et dépressions inadmissibles ainsi que des pertes de pression ou émissions inadmissibles. Le mon- tage du dispositif s’effectue verticalement sur un toit de réservoir.

This battery system allows the assembly of a series of solenoid valves type VY in 1/8 with various functions. The electrical control is integrated in the housing and equipped with a 25-pin SUB-D connector. The valve terminal can be preconfigured and ordered fully assembled and tested, or, thanks to the very simple, intuitive coding, you can assemble it yourself on the basis.

SCHÜTZE spray valve MKD-IS R/F The spray valves are electro-pneumatically controlled spray valves. They are suitable for spraying release agents, oils, colours and in version KLS also for glues and adhesives. The specific features are the regulation for atomizing air, separate for cone and middle holes and the integrated control valve for pre- and purging air. nozzle and needle: stainless steel available nozzle dimensions: 0,2; 0,3; 0,5; 0,8; 1,0; 1,2; 1,5 mm ø

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Refer to the advices on page 8! Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Function Pneumatic single acting with spring return, normally closed (NC). Pressure discharge One-sided Pilot pressure 6bar Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 Installation Only with vertical upwards actuator The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Mehrsitzventil, 1.4435, Schweißende/Clamp, gekammerte Membrane spiralabgestützt - SISTO-CM700 ● Mehrsitzventil ● Einzigartige Konstruktion mit gekammerter Membrane ● Spiralabstützung der Membrane ab MD65 ● Handbetätigt oder mit pneumatischem Antrieb ● Abdichtung im Durchgang und nach außen durch eine Membrane, daher nur zwei medienberührte Bauteile-Gehäuse und Membrane ● Orbitalschweißende oder Clampanschluss ● Gehäusewerkstoffe: Schmiedewerkstoff, Sonderwerkstoffe ● Membranwerkstoffe:EPDM, TFM/EPDM kaschiert, TFM/EPDM 2-teilig ● Verfügbare Nennweiten:DN6 bis DN100 ● Betriebstemperatur: – 20°C bis + 160°C ● Zulässiger Betriebsdruck: Vakuum bis 16 bar/20 bar optional Vorteile: ● Geeignet für Anwendungen bis 16 bar Leitungsdruck ● Erhöhte Betriebssicherheit ● Selbstentleerend ● Totraumfrei ● Keine Verunreinigung des Durchflussmediums ● CIP/SIP-Fähigkeit ● Wartungsfrei ● kompakte Bauform, platzsparend Druck:PN16 - 16bar Gehäusewerkstoff:Edelstahl/Sondermaterial geschmiedet - 1.4435; 316L; Hastelloy Nennweite (Standard):DN06 -DN100 Einsatztemperatur:-20°C - 160°C Membranwerkstoff:EPDM; TFM-EPDM kaschiert; TFM-EPDM 2-teilig Anschlußart:Schweißende; Clamp; Sonderanschlüsse Antrieb:Manuell; pneumatisch Dichtsystem:Gekammerte , spiralabgestützte Membrane Oberfläche:Ra=0,25 - 0,8; Elektropoliert; geschliffen Zulassungen:FDA; USP; EU1935

The fluid isolation valves with their chemical resistance, compact size and high flow rates are suitable for many applications. On request other sealing materials like EPDM or FKM can be used. Other technical data like electrical connections or the operating pressure range can be adapted. Function:2/2 way NC  Pressure range:0 - 8.0 bar Nominal orifice:5.0 mm Type of pneumatic connection:1/4" Push-in  Size:32 mm Actuation type:electrically actuated Duty cycle:25 % ED Type of electric connection:Lead wire with spade terminals  Medium:Water, syrup concentrates and filtered (5 µm), lubricated and non lubricated air Nominal power:18.0 W Nominal voltage:24 V DC Nominal current:750 mA Returning mechanism:Spring  Ambient temperature:0 … + 55 °C Materials:Housing: PA, Sealing: EPDM 

Brass Check Valve ( Vertical Type - Swing Type) ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded / Body Type : Vertical & Swing Type / Disc : Polymer Plastic For Vertical, Brass For Swing / Max. Working Temp. : 90 ºC / Max. Working Pressure : 10-16 Bar *** Application Areas : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids Nominal Diameter DN:DN15-DN100 Connection Type :Threaded Pressure class:PN10-PN16

We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

Messing-Nadelventile Nadelventil aus Messing, Blechhandrad rot (1) Material(Gehäsue und Nadel): Messing (2) Anschlussgröße(Art): 1½"(I × I) (3) Handrad: Blech rot (4) PN: 100 (6) Herkunft: Deutschland (5) Baulänge: 110 mm

Applications: Steel Industry / Industrial Combustion Technology / Renewable Energy Technology One-piece body, tight-closing, centric disc Design for mounting between flanges according to DIN EN 1092-1 or ASME B16.5 Face-to-face length according to DIN EN 558-1-R20. Leakage rate A according to DIN EN 12266-1. permissible operating pressure 5 bar For all gases according to DVGW worksheet G 260 Safety shut-off valve according to EN161 class A (closing time < 1s) max. Temperature:60°C max. Pressure:5 Bar Safety shut-off:<1s

1/2,3/4,1,1.1/4,1.1/2,2,3,4

Aluminum valve cups (sometimes also referred to as aluminum valve caps) are a mission-critical component for the dispensing solutions industry, represented primarily by aerosol cans. This specialized packaging is used across diverse markets including personal care, food, industrial, household and pharmaceutical. Novelis is a key global supplier to valve-cup manufacturers, ultimately supplying thousands of brands with high-quality and innovative dispensing solutions. Our basic objective is to ensure that our aluminum-valve-cup customers remain the preferred providers of innovative packaging, dispensing systems and solutions, consistently contributing to the success of their customers globally. Currently, Novelis products in coil form, like 5745 (H42) and 5052, with gauges (0.41 mm to 0.39 mm) and diverse widths, and coatings are helping them achieve their mission.

La serie R2MH in ottone a membrana trainata permette l'utilizzo a pressioni molto basse e vuoto grazie al sistema di aggancio che solleva la membrana durante l'azionamento della valvola. Disponibile nelle connessioni filettate G3/8"-G1/2"-G3/4"-G1" monta guarnizioni in NBR, FKM, EPDM in funzione delle applicazioni.

Cast Steel Valve Body Material:GP240GH ( 1.0619 ) Weight:24,00 KG Dimensions:270 mm x 160 mm Project:Valve Country:Turkey

2/2-Ways-Ball Valve KV Nom.width (mm) Flow rate (l/min) 12 ... 30 430 ... 1.450 manual switching on and off of individual suction pads

Barajlarda kullanılmak üzere yapılan genleşme parçası.

Electric Deluge Valve

Clapet simple battant, double battant, wafer, à boule ou bien à bille ? Acier, Inox et/ou autre ? Tous types de raccordement pour répondre à vos besoins.

Wafer type Butterfly valve ZIVA-Z - PN6/10/16 with worm gear Use: For drinking water and gas installations

Valves and Collectors - Valves and Collectors Category

Référence L.CAPD.S Description détaillée CLAPET ANTI POMPAGE PR DETENDEUR FILETE3/4 OU 1"

Nadelfeinsteinstellventil 3/8" LD/CA, codierte Verschlusskupplung und Tülle 90°

in Durchgang- und Eckform. In Serie und Sonderanfertigung. Mit Abmessungen von 1/8" bis 1/2" Außen- und/oder Innengewinde. Gegebenenfalls auch mit Rohranschluss.

Valvola a sfera a passaggio totale - attacchi M/F

Ausführung: Wafer, LUG, Monoflansch, Doppelflansch Betätigung Elektrisch, pneumatisch, Getriebe, Hand Nennweiten 50 – 2000 Druckstufen PN 25 Gehäuse GG-25, GGG-40, AISI304, AISI316 Scheibe GGG-40, Alu-Bronze, AISI316 Anstrich Epoxy, Rilsan, Welle AISI420, AISI316 Dichtring EPDM, NBR, Silikon, Viton, PTFE, U-PVC Temperatur max. 200°C Einbaunorm PN10/16, ANSI Class 150 Normen EN-558 Serie 20 (DIN3202-K1), ISO5752, API609, BS5155 Prüfungen EN12266-1/2, ISO5208, API598, ANSI B16-104, Class VI

4-Wege Umkehrventil Danfoss, STF-0715G. Leistungsbereich: 21 bis 53 kW. Anschlüsse: 1.1/8“ (28 mm) - saugseitig, 7/8“ (22 mm) - druckseitig. Fluorierte Kältemittel (R407C, R410A, R134a, R404A usw.)

This valve is equipped with a bypass system and an on/off valve. bypass system is used for connecting both side of the disk for special applications.

Vannes Y étanches avec pilote 24Vdc ou à commande pneumatique principalement utilisées pour la sélection de voies de test.