Izdelki za ventil (80)

Pressure Gauge, Stud Mount, 1/4” NPT, 0 to 30 psig See Catalog: Page 168

The Clippard NPV Series Pinch Valve is a solenoid-operated device that is designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid to remain in the valve. Pinch valves have no areas or dead volume where fluid can become trapped. Only the inside of the tubing contacts the fluid. Energizing the solenoid retracts or attracts the plunger, which opens or closes the tube. De-energizing the solenoid will allow the plunger to return to its original state. Features: • Small, compact design • Hygienic and easy to clean (replace tubes) • Low power consumption • High cycle life • Can handle whole blood and particulate matter • Unobstructed flow path • Each valve comes with 12" of silicone tubing • Variety of tubing sizes available • Tubing is easily replaceable Available in 2-Way Normally-Open or Normally- Closed or 3-Way ( one tube N.O. and one tube N.C.) configurations

12 VDC Electronic Fluidamp Valve See Catalog: Page 173, Page 189

3-Way Multiple Pilot, Spring Return Valve Notes minimum pilot pressure is 40 psi See Catalog: Page 263 Uses R-311 is a 3-way , spring retun, fully ported valve with four pilots. Any one of the four pilots will actuate the valve. Actuating more then one pilot has no additional effect. Pilot signals must be absent at all four pilots t release the valve. The v Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

Clippard's EFB series electronic fill and bleed circuits are a combination of Clippard pneumatic valve components used to inflate a volume or apparatus in one controllable function, and to release or vent pressure in a second controllable function. Fill and bleed circuits are commonly used in many applications where a particular pressure, firmness, or position can be controlled with the addition or venting of pressure. • Compact, robust design • Extremely fast response • Exceptionally long life • Multiple flow and pressure options • Variety of power and connection options • RoHS compliant Read More about the EFB Series Configure & View Products

Pressure Gauge, Stud Mount, 1/8” NPT, 0 to 60 psig See Catalog: Page 168

Fluidamp Valve, 3-Way, Metric

Clippard ES Series Valves The compact ES valve, like Clippard EV and ET valves, converts low voltage, low current signals into high pressure (0 to 105 psig) pneumatic outputs, utilizing a unique, patented valving principle. Since there are no sliding parts, and complete poppet travel is only 0.007”, low power consumption and exceptionally long life are assured with this design. No flow is required for cooling because the compact ES is cool, as well as quiet, in operation. The compact nature of design makes this valve well suited to a wide range of applications in biomedical, environmental test equipment, textile machines, packaging machinery, computerized industrial automation, and portable systems. • Close mounting - 7/8” on center • Overall height less than 1” • Easy to mount on manifold with two #4-40 screws • Geometric design • Polymer housing - Zytel ST 801® super tough • TE Connectivity-style pin connection or 18” wire leads • Flow up to 0.6 scfm (17 l/min) As in the case...

4-Way, 5-Ported, Memory Valve Notes minimum pilot pressure is 40 psi See Catalog: Page 273 Uses R-410 is a 4-way, fully ported valve with a special air retracted spring return that will return the valve to a definite position when there is no signal at ports 5 and 4. This Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

Water Drawback Valve, R1/8

Flow Control & Volume See Catalog: Page 285 Uses R-501 is an adjustable flow control designed to meter Additional Information Max PSI 150 psi Temperature Range 30 to 230 F

Pulse Valve See Catalog: Page 286 Uses R-711 is a 3-way, normally-OPEN, self-piloted valve that closes shortly after being pressurized and remains closed until signal pressure is exhausted. It converts a continuous input signal into a single pulse of approximately 50 milliseconds. Port 7 is Additional Information Max PSI 150 psi Temperature Range 30 to 230 F

Replacement Button for PB-1, Green

4-Way 2-Position, Electronic Valve, 12 VDC See Catalog: Page 284 Uses R-482-12 Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi

Clippard - Functional Simplicity The design of Clippard electronic valves is a deceptively simple arrangement with a minimum of operating parts, and remarkably straight forward low power operation. • The Clippard “spider” is the only moving part and its motion to operate the valve is a mere 0.007” travel. • Low voltage D.C. inputs, signals from simple manual switching up to computer directed systems, move the spider in extremely fast response time . . . 5 to 10 milliseconds. • The unit uses extremely low power (0.67 watts at the rated voltage) and is cool running. The valves are light in weight, compact in physical size and mount easily in space-saving packages. The complete line of EC, EV, ET and EW electronic valves are available with two mounting options. Standard base models have two 6-32 threaded, 7/32” deep mounting holes. Manifold models are equipped with a bottom stud, 5/32” long with #10-32 thread, which fits Clippard standard and special manifolds, accessory valves...

All of the benefits of Clippard quality and reliability are now available in these 10mm and 15mm valves. Offered in both Normally-Open or Normally-Closed models, these 2-way and 3-way valves are perfect for small areas where compact electronically-controlled pneumatics are needed. This series has a high strength, engineered light-weight glass filled nylon body, along with stainless steel, copper and Nitrile, making it suitable for a broad range of applications. With exceptional life and reliability, this is the perfect sub-miniature valve for tomorrow's needs in a wide variety of industries. Features: • 2-Way or 3-Way Operation • Detachable Coil and Body • Variety of Circuit Features • Manifold Options Available • RoHS Compliant • Multiple connectors—snap-in plugs, wire leads, custom plugs, DIN • Available LED for confirmation of operation • Highly visible manual override provides valve actuation without power • High durability and corrosion-resistant glass filled nylon...

24 VDC Electronic Fluidamp Valve See Catalog: Page 173, Page 189

4-Way Spring Return, Electronic Actuator, 6 VDC See Catalog: Page 284 Uses R-481-6 Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi

Pulse Valve, 1/8” Inlet See Catalog: Page 166 Additional Information Exhaust hole to atmosphere Max PSI 150 psig Ports 10-32 UNF

6 VDC Electronic Fluidamp Valve See Catalog: Page 173, Page 189

Pressure Gauge, Stud Mount, 1/4” NPT, 0 to 60 psig See Catalog: Page 168

4-Way Valve, 5-Ported, 2-Position Notes minimum pilot pressure is 40 psi See Catalog: Page 272 Uses R-402 is a 4-way, double piloted, fully ported, 2- position valve. R-402 is a versatile component in basic logic circuits, and can perform all 2-,3- and 4-way functions. Operates double action cylinders and allows speed control by restricting exhaust po Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

Subplate for R-932 Sequencing System (5 Valves) Notes 9 1/2: X 2 1/2: X 13/16 See Catalog: Page 253 Uses The R-932 sequence control subplate is a compact, efficient system for integrating sequential control of a multi-step operation. It has many uses throughout industry. For example: metalworking: multiple drilling, tapping, etc. Operation where workpi Additional Information Max PSI 120 PSIG Temperature Range 30-180 F

URM fabrique des vannes sur mesure répondant minutieusement à vos spécifications. Ces vannes en caoutchouc métal peuvent être fabriquées à partir de métal comme le laiton, l’acier ou l’acier inoxydable, puis être liées avec tous types d’élastomères. Ces composants caoutchouc métal peuvent être minutieusement fabriqués selon vos spécifications. Partant de schémas et dessins, URM fabrique votre composant jusque dans les moindres détails. Universal Rubber ne travaille qu’avec des mélanges de la plus haute qualité pour créer des jonctions caoutchouc métal de haut de gamme et fabriquer des produits en caoutchouc qui répondent pleinement aux besoins des clients. Utilisation par l'industrie Pour tout secteur industriel nécessitant des produits en caoutchouc de haute qualité et durables.

Hoogwaardige kogelkraan voor chemische toepassingen. Uitvoeringen voor verschillende drukklassen en met verschillende body en seat-materialen. Handmatige of gemotoriseerde bediening

Subplate for R-932 Sequencing System (2 Valves) Notes 4 1/2 See Catalog: Page 253 Uses 2- valve sequence subplate used as and expansion unit. 10-32 port connections provided for signal inputs, step outputs,supply and jumper connections for linking multiple boards together. May serve as a final segment of circuit or be inserted between two Additional Information Max PSI 120 PSIG Temperature Range 30-180 F

CUSTOM er Solutions Don’t see it here? Call us! With years of engineering and technical experience, Clippard continues to be a leader in manufacturing special products for a broad spectrum of industries. Don't let fears of higher prices and longer lead times hold you back - customized products make up nearly 50% of Clippard's electronic valve production! From simple tweaks to complex challenges, partner with Clippard to find the perfect solution for your needs. Integrated Solutions How else can we make it easy? This application requires special pressure decay testing and the assembly of customer-specified fittings, connector and special labeling. Tight Assemblies Cartridge design is desirable for integrating valves into compact assemblies. This EVP proportional valve is calibrated to meet the customers flow range and maintain “zero” leak rate, and is incorporated into the OEM’s manifold.

An even smaller Mouse valve! When space is critical, the EM Series Valve provides the best solution. At just over an inch tall, and less than 3/4” in diameter, the EM Valve uses Clippard’s special “spider” design. This reliable and proven design for long life is housed in a miniature body, and incorporates wire leads out the top, allowing body rotation for close-center mounting. In addition, the valve features higher flow; combining fast shifting speed, extremely high cycle life with the design flexibility to make this valve a “small wonder” for demanding applications. This valve is perfect for air and/or gas control, pilot control, and any application where space is limited, but desired performance is not. Note: Simply tighten valves onto the manifold using a standard 1/8" Allen hex wrench.

Adjustable Rod Arm See Catalog: Page 127

Head for LVA