Izdelki za ventil (994)

Rod gripper with a neodymium magnet in a steel housing. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The rod gripper has no thread and is usually glued or pressed in. Design:without thread Material:NdFeB  Force:90 N Height:20 mm Shortened to:15 mm Weight:31 g Temperature:80 °C Housing:steel 

The induction generator module is designed to supply up to 6 induction coils (inductors) with a power of up to 3 kW each. The device operates on the three-phase mains with a voltage of up to 400 V and a frequency of 50/60 Hz. The mains current is rectified and fed to the DC link, from which the inductors are individually supplied. The output power is controlled via the Kendrion controller of the modular industrial heating system. The setting range from 0% to 100% can be selected individually for each channel. By using state-of-the-art semiconductor switches, the output stages achieve high efficiencies, at working frequencies up to 25 kHz. Functions:Integrated power measurement, short circuit detection, DC link monitoring, automatic frequency tunin Load type:specific induction coils (inductance 875 μH ± 150μH)  Number of channels:6 channels individually controllable  Operating power:6 x bis zu 3 kW, continuous power 18 kW  Operating frequency:2 ... 25 kHz, automatic operating point determination  Supply voltage:3 x 400 VAC +10% /-15%; 50/60 Hz; Network configuration TT or TN  Modul bus:Data communication via CAN, electronic supply 24 VDC  Cooling:Forced air cooling, power loss max. 250W  Mounting:Prepared for installation on cabinet mounting plates  IP-Protection Class:IP 20, Device for mounting in a closed, metallic control cabinet  Dimensions (W x H x D):Book Size steel housing with stainless steel cover, (451 x 105 x 313)  Operating temperature:In vertical installation position: 0°C ... 35°C 

Holding magnet for holding or clamping ferromagnetic workpieces. The DC-excited coil achieves a holding force of up to 30,000 N when energized. When the supply voltage is switched off, the workpiece to be held falls off. The holding solenoid is maintenance-free and are characterized by a low operating current at high holding forces. Nominal voltage:24 V Duty cycle:100 % Power consumption:31.4 W Holding force:5000 N Design:round Diameter:170x29 mm Holding permanentmagnetic?:no Thermal class:E 120 Connection:free leads 300mm 

The Kuhnke Vico 04 series is a powerful indicator with an industrial design for the realisation of modern operating concepts. The installed CODESYS HMI software package offers the possibility to visualise data from one or more CDESYS controllers on a remote Kuhnke Vico 04. The visualisation is developed either independently or together with the PLC application in the free CODESYS Development System. The Kuhnke Vico 04 series is based on a powerful ARM Cortex-A8 processor combined with a resistive touch display. All components are robust and have long-term availability. Configuration:CODESYS HMI  Function:Touch Panel, CODESYS V3 HMI  Model:Panel front Built-in unit  Product status:Standard product  Display:10.1" wide  Resolution:800 x 480, WVGA  Processor:ARM Cortex-A8 - 1 Ghz  Operating system:Linux  Main memory:512 MB  Drive:Flash Interfaces:1 x LAN, 1 x USB, 1 x RS-232/485/422  Housing material:Plastic with insert foil  Data memory:Flash disk 4 GB  Dimensions (W x H x D):282 x 197 x 35 mm  IP-Protection Class:IP 66 / IP 20  Supply voltage:24 VDC / (10 VDC … 32 VDC)  Temperature range:0 ... +55°C