Izdelki za ventil (203)

Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000. Nominal voltage:24 V Duty cycle:100 % Power consumption:18.3 W Stroke:10 mm Inital force:7 N Return mechanism:Spring  Radial work load bearing:3000 N Currentless locking?:no  Emergency opener:no  Thermal class:F 155 

2/2 way proportional valves, 10 mm width, three different electrical connection possibilities. The steady valve opening allows a continuous adjustment of the flow. This proportional behaviour between control input and flow follows the valves unique characteristic curve and can be regulated with appropriate sensors and electronics for high precision. Function:2/2 way NO  Pressure range:0 - 8 bar Nominal orifice:0.5 mm Kv-value:0.11 l/min Size:10 mm Type of electric connection:Wire  Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:3.2 W Nominal voltage:24 V DC Type of pneumatic connection:Flange  Returning mechanism:Spring  Ambient temperature:-10 ... +50 °C Materials:Base: PBT, seal: NBR  Valve type:Poppet valve 

2/2 way Proportional Valve Type 68P with 15 mm width and two different electrical connection possibilities. The steady valve opening allows a continuous adjustment of the flow. This proportional behaviour between control input and flow follows the valves unique characteristic curve and can be regulated with appropriate sensors and electronics for high precision. Function:2/2-way NC  Pressure range:0 - 8 bar Nominal orifice:1.3 mm Kv-value:0.7 l/min Size:15 mm Actuation type:electrically actuated  Duty cycle:100 % ED Type of electric connection:Plug pins / pins  Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:4.2 W Nominal voltage:24 V DC Type of pneumatic connection:Flange  Returning mechanism:Spring  Protection class:IP65  Ambient temperature:-10 ... +50 °C Valve type:Poppet valve  Materials:Base: PBT, seal: NBR  Actuation:directly controlled  Identification number:195464 

These valves can be supplied in a wide variety of standard versions, e.g.: in three different base shapes (standard, flange and screw-in base), with connection for plug-in socket prefabricated or with flying leads, as 3/2 way NO/NC valve (2/2 way on request), also available as low watt version and with nominal orifice of 0.5, 1, 1.6 or 2 mm. For plug-in sockets, current indication and erasing diode please see valve accessories Function:3/2-way NC  Pressure range:0 - 8 bar Nominal orifice:1.0 mm Type of pneumatic connection:Flange  Kv-value:0.45 l/min Size:20 mm Actuation type:electrically actuated  Duty cycle:100 % ED Type of electric connection:Plug-in socket Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:5 W Nominal voltage:24 V DC Returning mechanism:Spring  Protection class:IP65  Ambient temperature:-10 ... +50 °C Valve type:Poppet valve Materials:Base: Brass, seal: NBR  Actuation:directly controlled 

2/2 way proportional valves, 15 mm width, two different electrical connection possibilities. The steady valve opening allows a continuous adjustment of the flow. This proportional behaviour between control input and flow follows the valves unique characteristic curve and can be regulated with appropriate sensors and electronics for high precision Function:2/2 way NO  Pressure range:0 - 3 bar Nominal orifice:2.5 mm Kv-value:1.9 l/min Size:15 mm Type of electric connection:Plug pins / pins  Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:5.2 W Nominal voltage:24 V DC Type of pneumatic connection:Flange  Returning mechanism:Spring  Ambient temperature:-10 ... +50 °C Materials:Base: PBT, seal: NBR  Valve type:Poppet valve 

Ex-Solenoid with Ignition Protection Type „Increased Safety”, Ex “e”. The explosion-proof solenoid convince through high forces, dynamic switching and long service life. It consists of a pot magnet and an aluminium connector housing. According to EN 60079 the connector housing provides a connection for the protective conductor. The linear solenoid comply with the European ATEX guideline 2014/34/EU for devices and protection systems intended for proper use in explosive areas and can be used in temperature class T4 (up to +135°C). It is supplied with 24 V DC as standard, other voltages are available on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:39.9 W Stroke:30 mm Inital force:90 N End force:370 N Return spring:no  Thermal class:F 155  Connection:connection box 

Ex-Solenoid with Ignition Protection Type „Increased Safety”, Ex “e”. The explosion-proof solenoid convince through high forces, dynamic switching and long service life. It consists of a pot magnet and an aluminium connector housing. According to EN 60079 the connector housing provides a connection for the protective conductor. The linear solenoid comply with the European ATEX guideline 2014/34/EU for devices and protection systems intended for proper use in explosive areas and can be used in temperature class T4 (up to +135°C). It is supplied with 24 V DC as standard, other voltages are available on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:77.2 W Stroke:40 mm Inital force:170 N End force:375 N Return spring:no  Thermal class:F 155  Connection:connection box 

15 mm width, different electrical connection possibilities. Manual override optional, offered as rotary knob to be adjusted via flat-tip screwdriver or as "paddle" for the use without additional tools Function:3/2-way NC  Pressure range:2-8 bar Nominal orifice:2.6 mm Type of electric connection:Wire  Kv-value:3.2 l/min Size:15 mm Actuation type:elektrisch betätigt  Duty cycle:100 % ED Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:1.0 W Nominal voltage:12 V DC Nominal current:83 mA Type of pneumatic connection:Flange  Returning mechanism:Spring  Protection class:IP51  Ambient temperature:-20... +60 °C Valve type:Poppet valve  Materials:Housing PBT, Seal NBR  Actuation:pilot controlled 

15 mm width, different electrical connection possibilities. Manual override optional, offered as rotary knob to be adjusted via flat-tip screwdriver or as "paddle" for the use without additional tools Function:3/2-way NC  Pressure range:2-8 bar Nominal orifice:2.6 mm Type of electric connection:Wire  Kv-value:3.2 l/min Size:15 mm Actuation type:elektrisch betätigt  Duty cycle:100 % ED Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:1.0 W Nominal voltage:12 V DC Nominal current:83 mA Type of pneumatic connection:Flange  Returning mechanism:Spring  Protection class:IP51  Ambient temperature:-20... +60 °C Valve type:Poppet valve  Materials:Housing PBT, Seal NBR  Actuation:pilot controlled 

10 mm width, three different electrical connection possibilities. Optionally with manual override operation. Function:3/2-way Bistable  Pressure range:0 - 7 bar Nominal orifice:0.7 mm Type of pneumatic connection:Flange  Kv-value:0.23 l/min Size:10 mm Duty cycle:100 % ED Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:1 W Nominal voltage:24 V DC Nominal current:153 mA Returning mechanism:Spring  Ambient temperature:-10 ... +50 °C Materials:Base: PBT, seal: NBR 

2/2 way proportional valves, 15 mm width, two different electrical connection possibilities. The steady valve opening allows a continuous adjustment of the flow. This proportional behaviour between control input and flow follows the valves unique characteristic curve and can be regulated with appropriate sensors and electronics for high precision. Function:2/2 way NO  Pressure range:0 - 5 bar Nominal orifice:1.6 mm Kv-value:1.05 l/min Size:15 mm Duty cycle:100 % ED Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:4.2 W Nominal voltage:24 V DC Type of pneumatic connection:Flange  Returning mechanism:Spring  Ambient temperature:-10 ... +50 °C Materials:Base: PBT, seal: NBR  Valve type:Poppet valve 

15 mm width, different electrical connection possibilities. Manual override optional, offered as rotary knob to be adjusted via flat-tip screwdriver or as "paddle" for the use without additional tools Function:3/2-way NC  Pressure range:2-8 bar Nominal orifice:2.6 mm Type of electric connection:Wire  Kv-value:3.2 l/min Size:15 mm Actuation type:elektrisch betätigt  Duty cycle:100 % ED Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:1.0 W Nominal voltage:12 V DC Nominal current:83 mA Type of pneumatic connection:Flange  Returning mechanism:Spring  Protection class:IP51  Ambient temperature:-20... +60 °C Valve type:Poppet valve  Materials:Housing PBT, Seal NBR  Actuation:pilot controlled 

10 mm width, three different electrical connection possibilities. Optionally with manual override operation. Nominal voltage:24 V DC Nominal current:153 mA Returning mechanism:Spring Protection class:IP65  Ambient temperature:-10 ... +50 °C Valve type:Poppet valve  Materials:Base: PBT, seal: NBR  Actuation:directly controlled  Identification number:99783  Pressure range:0 - 5 bar Nominal orifice:0.9 mm Type of pneumatic connection:Flange  Kv-value:0.33 l/min Size:10 mm Actuation type:electrically actuated  Duty cycle:100 % ED Type of electric connection:Plug  Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:1.8 W

15 mm width, different electrical connection possibilities. Manual override optional, offered as rotary knob to be adjusted via flat-tip screwdriver or as "paddle" for the use without additional tools Function:3/2-way NO Pressure range:2-8 bar Nominal orifice:2.6 mm Type of electric connection:Wire  Kv-value:3.2 l/min Size:15 mm Actuation type:elektrisch betätigt  Duty cycle:100 % ED Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:1.0 W Nominal voltage:12 V DC Nominal current:42 mA Type of pneumatic connection:Flange  Returning mechanism:Spring  Protection class:IP51  Ambient temperature:-20... +60 °C Valve type:Poppet valve  Materials:Housing PBT, Seal NBR  Actuation:pilot controlled 

Ex-Solenoid with Ignition Protection Type „Increased Safety”, Ex “e”. The explosion-proof solenoid convince through high forces, dynamic switching and long service life. It consists of a pot magnet and an aluminium connector housing. According to EN 60079 the connector housing provides a connection for the protective conductor. The linear solenoid comply with the European ATEX guideline 2014/34/EU for devices and protection systems intended for proper use in explosive areas and can be used in temperature class T4 (up to +135°C). It is supplied with 24 V DC as standard, other voltages are available on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:25.3 W Stroke:20 mm Inital force:30 N End force:70 N Return spring:no  Thermal class:B 130  Connection:connection box 

Direct acting valve, 15 mm width, two individual electrical connection possibilities. Function:3/2-way NO  Pressure range:0 - 5 bar Nominal orifice:1.3 mm Type of pneumatic connection:Flange  Kv-value:0.65 l/min Size:15 mm Actuation type:electrically actuated  Duty cycle:100 % ED Type of electric connection:Plug pins / pins  Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:3 W Nominal voltage:24 V DC Returning mechanism:Spring  Protection class:IP65  Ambient temperature:-10 ... +50 °C Valve type:Poppet valve Materials:Base: Brass, seal: NBR  Actuation:directly controlled 

These valves can be supplied in a wide variety of standard versions, e.g.: in three different base shapes (standard, flange and screw-in base), with connection for plug-in socket prefabricated or with flying leads, as 3/2 way NO/NC valve (2/2 way on request), also available as low watt version and with nominal orifice of 0.5, 1, 1.6 or 2 mm. For plug-in sockets, current indication and erasing diode please see valve accessories Function:3/2-way NC  Pressure range:0 - 4 bar Nominal orifice:2.0 mm Type of pneumatic connection:Flange  Kv-value:1.15 l/min Size:20 mm Actuation type:electrically actuated  Duty cycle:100 % ED Type of electric connection:Plug-in socket Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:4.5 W Nominal voltage:24 V DC Returning mechanism:Spring  Protection class:IP65  Ambient temperature:-10 ... +50 °C Valve type:Poppet valve Materials:Base: Brass, seal: NBR  Actuation:directly controlled 

10 mm width, three different electrical connection possibilities. Optionally with manual override operation. Function:3/2-way NO  Pressure range:0 - 7 bar Nominal orifice:0.7 mm Type of pneumatic connection:Flange  Kv-value:0.23 l/min Size:10 mm Actuation type:electrically actuated  Duty cycle:100 % ED Type of electric connection:Wire  Medium:Filtered (5 µm), lubricated and non lubricated air  Identification number:65674  Nominal power:1.8 W Nominal voltage:24 V DC Nominal current:153 mA Returning mechanism:Spring  Protection class:IP65  Ambient temperature:-10 ... +50 °C Valve type:Poppet valve Materials:Base: PBT, seal: NBR 

10 mm width, three different electrical connection possibilities. Optionally with manual override operation. Function:2/2-way NO Pressure range:0 - 5 bar Nominal orifice:0.9 mm Type of pneumatic connection:Flange  Kv-value:0.33 l/min Size:10 mm Actuation type:electrically actuated  Duty cycle:100 % ED Type of electric connection:Plug pins / pins  Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:1.8 W Nominal voltage:24 V DC Nominal current:153 mA Nominal current:Spring  Protection class:IP65  Ambient temperature:-10 ... +50 °C Valve type:Poppet valve  Materials:Base: PBT, seal: FKM  Actuation:directly controlled 

Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000. Nominal voltage:230V AC V Duty cycle:100 % Power consumption:18.3 W Stroke:10 mm Inital force:7 N Return mechanism:Spring  Radial work load bearing:3000 N Currentless locking?:yes Emergency opener:yes Thermal class:F 155 

Electromagnetically operated pinch valve PPV 7 (NC) with high flow rates and precise control. The 2/2-way NC pinch valve clamps tubes with a Diameter up to 7mm and depending on the used material (PVC / Silicone) up to 1.5mm wall thickness. It has a clamping force of 42N. Solenoid weight:1300 g Dimensions:84 x 53 x 146  Design:2/2 way  Mode of action:NC  Diameter hose:4 to 7 mm Nominal voltage:DC 24 V Duty cycle:100 % Power consumption:18 W Thermal class:B 130 °C  Clamping force:42 N Connection:Lead 20 cm 

Locking solenoids of the LLV series are characterized by high forces, compact design and a lateral force carrying capacity of up to 4,000 N. The electromagnetic locking units were specially developed for use in protective devices. They are available in the versions currentless locking (CL; spring force keeps bolt in locking position) and currentless unlocking (CU; spring force keeps bolt open, locked when energized). Solenoid armature and locking bolt are guided separately in maintenance-free bearings. The latch bolt is made of stainless. The microswitch, which is installed directly in the latch housing, signals the respective position of the latch bolt approx. 0.5 mm to 1 mm after leaving the stroke start position or before reaching the stroke end position. The locking solenoids are manufactured and tested according to DIN VDE 0580/07.2000. Nominal voltage:230V AC V Duty cycle:100 % Power consumption:21.5 W Stroke:12 mm Inital force:17.5 N Return mechanism:Spring  Radial work load bearing:1500 N Currentless locking?:no  Emergency opener:no  Thermal class:B 130 

Control Linear Solenoid with short stroke travels and high magnetic forces for precise switching of valves. The control solenoid is based on the force effect exerted on ferromagnetic bodies in the magnetic field. The electrical energy is converted into mechanical kinetic energy. The armature is reset by spring, weight or magnetic forces. The control solenoid is available in different versions and tested according to DIN VDE 0580/07.2000. Nominal voltage:24 V Duty cycle:100 % Power consumption:28.3 W Stroke:8 mm Inital force:125 N End force:375 N Return spring:No Design:No  Protection class:IP 40 Thermal class:B 130  Connection:Plug Solenoid weight:3250 g Armature weight:400 g Special Features:Flange on the pressure side 

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or by pulling. The solenoid convinces in various applications with smallest space requirement at high forces. The LHP035 series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm) depending on the application. The plug (= IP40), sealing ring and bellows (=IP54) ensure an increased degree of protection. Resetting can be performed by means of an optional integrated spring. Special voltage variants of the solenoid are also available on request. Due to its square design, particularly high forces and simple mounting characterize the high-performance linear solenoid. In addition, the strong solenoid convinces with short switching times and a long service life of up to 10 million switching cycles. The configuration options of the LHP035 are versatile. Nominal voltage:24 V Duty cycle:100 % Power consumption:CODESYS V3 PLC with EtherCAT Expansion module 16DI/16DO  Stroke:10 mm Inital force:12.4 N End force:65 N Return spring:No  Design:No  Protection class:IP 40  Thermal class:F 155  Connection:Leads / cable  Solenoid weight:450 g Armature weight:110 g

The D-frame solenoid LCL 40x50 is characterized by a compact design, low power consumption and short switching times. A long service life is promoted by the precision steel tube housing and maintenance-free armature bearings. The frame solenoid can be installed in any position, with the force preferably being applied in the axial direction only. It is fastened via threaded holes on the side or on the face. As standard, the frame linear solenoid has a chemically nickel-plated armature and a plastic-molded solenoid coil and has protection class IP 40. Versions with bellows achieve protection class IP54. Nominal voltage:24 V Duty cycle:100 % Power consumption:15.9 W Stroke:20 mm Inital force:9 N End force:20 N Return spring:IP 40  Thermal class:B 130  Connection:Plug  Solenoid weight:660 g Armature weight:125 g

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or by pulling. The solenoid convinces in various applications with smallest space requirement at high forces. The LHP035 series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm) depending on the application. The plug (= IP40), sealing ring and bellows (=IP54) ensure an increased degree of protection. Resetting can be performed by means of an optional integrated spring. Special voltage variants of the solenoid are also available on request. Due to its square design, particularly high forces and simple mounting characterize the high-performance linear solenoid. In addition, the strong solenoid convinces with short switching times and a long service life of up to 10 million switching cycles. The configuration options of the LHP035 are versatile. Nominal voltage:24 V Duty cycle:100 % Power consumption:23.78 W Stroke:10 mm Inital force:12.4 N End force:65 N Return spring:No Design:No  Protection class:IP 40 Thermal class:F 155 Connection:Leads / cable Solenoid weight:450 g Armature weight:110 g

Open frame solenoid as pull type solenoid with conical face armature. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area. Nominal voltage:24 V Duty cycle:100 % Power consumption:6.2 W Stroke:7 mm Inital force:0.7 N End force:7 N Return spring:No Design:No  Protection class:IP 00  Thermal class:E 130  Connection:10 cm lead  Solenoid weight:145 g Armature weight:25 g

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or pulling. In general, the stroke movement is from the stroke start to the stroke end position. The electromagnet is convincing in a wide range of applications with smallest space requirements and high forces. Depending on the area of application, the LHP035 can be optimally configured. The series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm). The plug (= IP40), sealing ring and bellows (=IP54) provide an increased degree of protection. The reset can be carried out by means of an optional integrated spring. Special voltage variants are also available on request. Benefits at a glance: high forces with small installation space, simple mounting due to square design, short switching times, low wear, 10 million switching cycles in long-term test, wide range of configuration options Nominal voltage:24 V Duty cycle:100 % Power consumption:23.78 W Stroke:15 mm Inital force:9 N End force:60 N Return spring:No Design:No  Protection class:IP 54 Thermal class:F 155 Connection:Leads / cable Solenoid weight:450 g Armature weight:110 g

High power solenoids of the LHS series are solenoids with strong holding forces. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The LHS high performance solenoids are available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:12.3 W Stroke:8 mm Inital force:8 N End force:25 N

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or pulling. In general, the stroke movement is from the stroke start to the stroke end position. The electromagnet is convincing in a wide range of applications with smallest space requirements and high forces. Depending on the area of application, the LHP035 can be optimally configured. The series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm). The plug (= IP40), sealing ring and bellows (=IP54) provide an increased degree of protection. The reset can be carried out by means of an optional integrated spring. Special voltage variants are also available on request. Benefits at a glance: high forces with small installation space, simple mounting due to square design, short switching times, low wear, 10 million switching cycles in long-term test, wide range of configuration options Nominal voltage:24 V Duty cycle:100 % Power consumption:23.78 W Stroke:5 mm Inital force:21.9 N End force:75 N