Izdelki za ventil (203)

High power solenoids of the LHS series are solenoids with strong holding forces. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The LHS high performance solenoids are available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:185.2 W Stroke:60 mm Inital force:410 N End force:1300 N Return spring:No Design:No  Protection class:IP 00  Thermal class:F 155 Connection:Terminal box with/without cable  Solenoid weight:25000 g Armature weight:7000 g

Open frame linear solenoid as a thrust type solenoid. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:1.1 W Stroke:2 mm Inital force:0.03 N End force:0.25 N

Bistable linear solenoid with permanent magnetic support in open frame technology. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area. Nominal voltage:24 V Duty cycle:25 % Power consumption:9.5 W Stroke:4 mm Inital force:2,8 N End force:9 N Return spring:Yes  Design:Yes  Protection class:IP 00  Thermal class:E, 120  Connection:10 cm lead  Solenoid weight:46 g Armature weight:12 g

Rotary solenoid in cylindrical design with shafts on both sides and return spring. This preferred type is available in small quantities from stock. Further rotation angle, shaft types or other voltages are available on request. You will find more information in the download area. Design:monostable  Rotation angle:45°  Inital torque:3.6 Ncm End torque:9.3 Ncm Return mechanism:Spring return  Housing type:round  Nominal voltage:24 V Duty cycle:100 % Power consumption:10 W Thermal class:B 130 °C  Connection:Leads 20 cm  Dimensions:Diameter 50 / Length 35 mm  Solenoid weight:380 g Dynamic moment of inertia:1.8 x 10^-6 kg m^2 

The Reversible Linear Solenoid LHR090 is characterized by high performance. It is delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The reversing solenoid is available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:52 W Stroke:25 mm Inital force:73 N End force:270 N Return spring:No  Design:No  Protection class:IP 54  Thermal class:F 155  Connection:Plug  Solenoid weight:7600 g Armature weight:1400 g

The compact solenoid lock AL convinces with a very high static holding force. The solenoid door lock integrates a high-performance linear solenoid, which has bistable design. The bistable design enables that the door will be locked only if the solenoid is energized for a short time. In order to unlock, the solenoid needs to be energized for a short time as well. The polarity needs to be reversed. Usage of the locking:snap in / linear  Way of locking:active-locked / bistable  Nominal voltage:24 V V Duty cycle:10% ED % Power consumption:36 W W Max. static holding force:1600 N N Max. load force for electrical unlocking:400 N N Connection:Lead 18 cm  Snap-in function:Yes  Emergency opener:Yes  Operating temprature:0 - 80 °C  Dimensions:70 x 70 x 18 mm 

Rotary solenoid in cylindrical design with shafts on both sides and return spring. This preferred type is available in small quantities from stock. Further rotation angle, shaft types or other voltages are available on request. Design:monostable  Rotation angle:45°  Inital torque:0.18 Ncm End torque:0.44 Ncm Return mechanism:Spring return  Nominal voltage:24 V Duty cycle:100 % Power consumption:3.8 W Thermal class:B 130 °C  Connection:Leads 20 cm 

Roller inductors are used in the production of synthetic fibres or in embossing processes in the graphics industry. Different roll diameters can be applied and one or more axial heating zones can be realised depending on the requirements. An essential advantage of the roller inductors is the contactless energy transfer to the rotating roller. ; Roller inductors from 60mm diameter; No slip rings required; Divided into independently controllable axial segments; Optimal temperature control & uniform heating; Emission-free heating Operating power:up to 6,5 kW / Channel  Maximum heating temperature:250°C 

Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. Nominal voltage:24 V Duty cycle:100 % Power consumption:50 W Stroke:30 mm Inital force:100 N End force:450 N

Bistable linear solenoid with permanent magnetic support in open frame technology. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. Stroke:2.5 mm Nominal voltage:24 V Duty cycle:15 % Power consumption:7.2 W Inital force:0,18 N End force:3.5 N Thermal class:E, 120 

Linear solenoid in enclosed design with maintenance-free armature bearing for maximum durability. Available as combi type solenoid, also with integrated return spring. Starting with size RM040 of the modular system, the heavy duty solenoids are available in a wide range of specifications, including splash-proof models. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area. Nominal voltage:24 V Duty cycle:100 % Power consumption:20 W Stroke:10 mm Inital force:13 N End force:25 N Return spring:No  Design:No  Protection class:IP 40/65  Thermal class:F, 155  Connection:20 cm lead  Solenoid weight:610 g Armature weight:200 g

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or pulling. In general, the stroke movement is from the stroke start to the stroke end position. The electromagnet is convincing in a wide range of applications with smallest space requirements and high forces. Depending on the area of application, the LHP035 can be optimally configured. The series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm). The plug (= IP40), sealing ring and bellows (=IP54) provide an increased degree of protection. The reset can be carried out by means of an optional integrated spring. Special voltage variants are also available on request. Benefits at a glance: high forces with small installation space, simple mounting due to square design, short switching times, low wear, 10 million switching cycles in long-term test, wide range of configuration options Nominal voltage:24 V Duty cycle:100 % Power consumption:23.78 W Stroke:20 mm Inital force:7.4 N End force:45 N Return spring:No Design:No  Protection class:IP 54 Thermal class:F 155 Connection:Leads / cable Solenoid weight:450 g Armature weight:110 g

Pneumatic timers are used for the precise time control of pneumatic signals in pneumatic circuits or systems. The pressure-independent function of time delay starts when pressure is applied to the control port. After the pre-selected time is elapsed, an internal 3/2 way valve is switched. The pneumatic timer is reset to the initial condition if the control port is vented for at least 300 ms. The adjustable time delay depends on the chosen version and amounts between 0.5 and 180 s. Due to its design the control pressure level must not be below working pressure level. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID. Time intervall:0.5 - 60 s  Function:3/2-way NC  Pressure range:1.5 - 8 bar Type of pneumatic connection:1/8 NPT  Product type:Timer  Mounting:Subplate  Medium:Compressed air, non lubricated  Ambient temperature:-10 ... +60 °C

Surface mount inductors are used for heating processes in the food industry, in packaging machines or in embossing processes in the graphics industry. The material thickness of the heated tools can be reduced due to the surface energy input. This increases the dynamics of the process and saves energy. Operating power:up to 6,5 kW / Channel  Maximum heating temperature:250°C 

Open frame solenoid as a combi type solenoid with integrated return spring. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area. Nominal voltage:24 V Duty cycle:100 % Power consumption:5.2 W Stroke:5 mm Inital force:1 N End force:3.5 N Return spring:Yes  Design:No  Protection class:IP 00  Thermal class:B 130  Connection:10 cm lead  Solenoid weight:90 g Armature weight:17 g

The compact solenoid lock SL convinces with a very high static holding force. The solenoid door lock integrates a high-performance linear solenoid, which has monostable design. The monostable design enables that the door can be locked every time when the solenoid is not energized. In order to unlock, the solenoid needs to be energized for a short time. Way of locking:self-locked / monostable  Nominal voltage:24 V V Duty cycle:10% ED % Power consumption:36 W W Max. static holding force:1600 N N Max. load force for electrical unlocking:400 N N Connection:Lead 18 cm  Snap-in function:Yes  Emergency opener:Yes  Operating temprature:0 - 80 °C  Dimensions:70 x 70 x 18 mm 

High power solenoids of the LHS series are solenoids with strong holding forces. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The LHS high performance solenoids are available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:185.2 W Stroke:60 mm Inital force:410 N End force:1300 N

Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The reversing solenoids are available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:19 W Stroke:8 mm Inital force:10 N End force:25 N

Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The reversing solenoids are available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:50 W Stroke:30 mm Inital force:100 N End force:450 N Return spring:No Design:No  Protection class:IP 540 Thermal class:F 155 Connection:Plug Solenoid weight:12000 g Armature weight:1600 g

Linear solenoid in enclosed design with maintenance-free armature bearing for maximum durability. Available as combi type solenoid, also with integrated return spring. Starting with size RM040 of the modular system, the heavy duty solenoids are available in a wide range of specifications, including splash-proof models. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area. Nominal voltage:24 V Duty cycle:100 % Power consumption:20 W Stroke:10 mm Inital force:13 N End force:25 N Return spring:No Design:No  Protection class:IP 40/65 Thermal class:F 155 Connection:20 cm lead  Solenoid weight:610 g Armature weight:200 g

Linear solenoid in enclosed design with maintenance-free armature bearing for maximum durability. Available as combi type solenoid, also with integrated return spring. Starting with size RM040 of the modular system, the heavy duty solenoids are available in a wide range of specifications, including splash-proof models. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area. Nominal voltage:24 V Duty cycle:100 % Power consumption:31 W Stroke:15 mm Inital force:33 N End force:105 N Return spring:Yes  Design:No  Protection class:IP 40/65 Thermal class:F 155 Connection:20 cm lead  Solenoid weight:2000 g Armature weight:400 g

The D-frame solenoid LCL is characterized by a compact design, low power consumption and short switching times. A long service life is promoted by the precision steel tube housing and maintenance-free armature bearings. The frame solenoid can be installed in any position, with the force preferably being applied in the axial direction only. It is fastened via threaded holes on the side or on the face. As standard, the frame linear solenoid has a chemically nickel-plated armature and a plastic-molded solenoid coil and has protection class IP 40. Versions with bellows achieve protection class IP54. Other voltages are possible on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:15.9 W Stroke:20 mm Inital force:9 N End force:20 N Connection:Leads / cable 

Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The reversing solenoids are available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:81.1 W Stroke:40 mm Inital force:170 N End force:570 N Return spring:No Design:No  Protection class:IP 540 Thermal class:F 155 Connection:Plug Solenoid weight:18500 g Armature weight:2500 g

The D-frame solenoid LCL is characterized by a compact design, low power consumption and short switching times. A long service life is promoted by the precision steel tube housing and maintenance-free armature bearings. The frame solenoid can be installed in any position, with the force preferably being applied in the axial direction only. It is fastened via threaded holes on the side or on the face. As standard, the frame linear solenoid has a chemically nickel-plated armature and a plastic-molded solenoid coil and has protection class IP 40. Versions with bellows achieve protection class IP54. Other voltages are possible on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:26.7 W Stroke:25 mm Inital force:25 N End force:90 N Return spring:No Design:No  Protection class:IP 54 Thermal class:B 130  Connection:Plug Solenoid weight:2040 g Armature weight:410 g

Open frame solenoid as thrust type solenoid with conical face armature. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:5.2 W Stroke:5 mm Inital force:1 N End force:3.5 N

The Kuhnke CIO compact I / O connects various input and output signals in a compact housing for the DIN rail. The process data are made available via the CANopen interface according to the device profile CiA 401 of the higher-level control system. The robust design makes it suitable for use in machine and apparatus construction.;Compact control cabinet module; integrierte I/Os: 16DI/16DO/4AI-I/4AI-U/4AO-I/4AO-U/6Pt100/2Thermo; CANopen fieldbus interface Configuration:16DI/16DO/4AI-I/4AI-U/4AO-I/4AO-U/6Pt100/2Thermo  Function:I/O system with CANopen field bus  Product status:Standard product  Field bus interfaces:CANopen  Interfaces:CANopen  Digital I/Os (integrated):16 DI 5 ms, 16 DO 0,5A  Analogue I/Os (integrated):4AI-I, 4AI-U, 4AO-I, 4AO-U, 6Pt100, 2Thermo  Type of connection:multi-pin plug connector  Status indication:system messages  Housing material:aluminium tray with stainless steel cover  Dimensions (W x H x D):170 mm x 115 mm x 48 mm  IP-Protection Class:IP 20  Supply voltage:24 V (-20% / +25%)  Operating temperature:0 ... +55 °C 

The Kuhnke CIO compact I / O connects various input and output signals in a compact housing for the DIN rail. The process data are made available via the CANopen interface according to the device profile CiA 401 of the higher-level control system. The robust design makes it suitable for use in machine and apparatus construction. Function:I/O system with CANopen field bus Model:open circuit board for the control cabinet  Field bus interfaces:CANopen  Interfaces:CANopen  Digital I/Os (integrated):48 DI 5 ms, 24 DO 0,5A  Analogue I/Os (integrated):2AI-U, 2AO-U, 8Pt, 1Thermo  Type of connection:multi-pin plug connector  Dimensions (W x H x D):212 mm x 104 mm x 40 mm 

Rotary solenoids in square design with shafts on both sides and return spring. This preferred type is available in small quantities from stock. Further rotation angle, shaft types or other voltages are available on request. You will find more information in the download area. Design:monostable  Rotation angle:95°  Inital torque:1.8 Ncm End torque:12.7 Ncm Return mechanism:Spring return  Housing type:rectangular  Nominal voltage:24 V Duty cycle:100 % Power consumption:19.2 W Thermal class:B 130 °C  Connection:Leads 20 cm  Dimensions:50 x 50 mm / Length 35 mm  Solenoid weight:570 g Dynamic moment of inertia:4.25 x 10^-6 kg m^2 

Linear solenoid in enclosed design with maintenance-free armature bearing for maximum durability. Available as combi type solenoid, also with integrated return spring. Starting with size RM040 of the modular system, the heavy duty solenoids are available in a wide range of specifications, including splash-proof models. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:18 W Stroke:15 mm Inital force:5 N End force:50 N

Linear solenoid in enclosed design with maintenance-free armature bearing for maximum durability. Available as combi type solenoid, also with integrated return spring. Starting with size RM040 of the modular system, the heavy duty solenoids are available in a wide range of specifications, including splash-proof models. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:5.5 W Stroke:4 mm Inital force:1.9 N End force:6 N