Izdelki za ventil (1560)

FSA-Qualität:Geringer Stromverbrauch, hochwertige Materialien und zuverlässige Dichtigkeit. Ansteuerung: Im Lieferumfang ist eine ausführliche Anleitung enthalten. Weitere Informationen zur Steuerung sind im unteren Abschnitt verfügbar. Vorteil Antrieb: Der Antrieb verbraucht nur beim Schalten Strom, sobald die Endlage erreicht wurde verbraucht er keinen Strom mehr. Anwendungsbereiche: Antriebe mit integriertem Kondensator eignet sich für Anwendungen, bei denen ein Schalten einer stromlosen Position bei kompletten Stromausfall notwendig ist. Lebensdauer: 50.000 Schaltzyklen Technische Daten:B-Head-S90C-230L Betätigung:Auf-/Zu Schaltzeit:8 Sek Leistung des Antriebs:5,0 W Gewicht:296 g Schutzklasse:IP45 Schaltzyklen:30.000

Matériau:acier inoxydable Processus de traitement:CNC usinage et fraisage.

FSA-Qualität: Unsere Magnetventile aus Messing bieten Ihnen vielseitige Einsatzmöglichkeiten in Bereichen wie Bewässerung, Landwirtschaft und Rechenzentren. Anschluss: Im Lieferumfang ist eine ausführliche Anleitung enthalten. Weitere Informationen zum Anschluss sind im unteren Abschnitt verfügbar. Funktion: Elektromagnetisches Feld bewegt den Hubanker je nach Wicklung des Magnetkopfes. Vorteil Magnetventil: Hohe Schaltzyklen (bis zu 500.000), schnelles Schalten (10 ms) und platzsparende Bauweise. Bitte Beachten: Das Magnetventil wird sehr Heiß im Einsatz bis zu 80°C. 100% Einschaltdauer ist möglich. Technische Daten:M-1-230-O Temperatur:-30° bis 150° C Gewinde:G-Gewinde Druck:8,0 bar Kv-Wert / Cv-Wert:10,28 / 12,00 Leistung der Spule:37 W Gewicht:1.228 g Öffnungsquerschnitt:25,0 mm Schutzklasse:IP65 Dichtung:Viton Schaltzyklen:500.000

Cette machine parfaitement conçue peut être équipée à l'avant d'un double roulement haute performance à la place du roulement simple pour constituer ainsi l'outil idéal pour les applications et les charges les plus exigeantes. Elle est cependant légère et se loge naturellement dans la main pour une parfaite ergonomie. Grâce à sa vitesse de rotation élevée, cette meuleuse produit une surface très propre. Elle est donc idéale pour les travaux précis de meulage, fraisage et gravure. Actionnements:pneumatique,à air Autres caractéristiques:droite,échappement arrière

Two and three-way valves are used for transfer of liquids or gases in order to release the flow, to block it or to change its direction. Material:PP/PE or PVDF

Gauges / Thermometers and Accessories - Manometer gauge valves MAV16270; MAV16271; MAV16272

Valves - Manometer gauge valves MAV16270; MAV16271; MAV16272

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or by pulling. The solenoid convinces in various applications with smallest space requirement at high forces. The LHP035 series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm) depending on the application. The plug (= IP40), sealing ring and bellows (=IP54) ensure an increased degree of protection. Resetting can be performed by means of an optional integrated spring. Special voltage variants of the solenoid are also available on request. Due to its square design, particularly high forces and simple mounting characterize the high-performance linear solenoid. In addition, the strong solenoid convinces with short switching times and a long service life of up to 10 million switching cycles. The configuration options of the LHP035 are versatile. Nominal voltage:24 V Duty cycle:100 % Power consumption:CODESYS V3 PLC with EtherCAT Expansion module 16DI/16DO  Stroke:10 mm Inital force:12.4 N End force:65 N Return spring:No  Design:No  Protection class:IP 40  Thermal class:F 155  Connection:Leads / cable  Solenoid weight:450 g Armature weight:110 g

The D-frame solenoid LCL 40x50 is characterized by a compact design, low power consumption and short switching times. A long service life is promoted by the precision steel tube housing and maintenance-free armature bearings. The frame solenoid can be installed in any position, with the force preferably being applied in the axial direction only. It is fastened via threaded holes on the side or on the face. As standard, the frame linear solenoid has a chemically nickel-plated armature and a plastic-molded solenoid coil and has protection class IP 40. Versions with bellows achieve protection class IP54. Nominal voltage:24 V Duty cycle:100 % Power consumption:15.9 W Stroke:20 mm Inital force:9 N End force:20 N Return spring:IP 40  Thermal class:B 130  Connection:Plug  Solenoid weight:660 g Armature weight:125 g

Available size: from DN300-12″ up to DN3000-120″

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or by pulling. The solenoid convinces in various applications with smallest space requirement at high forces. The LHP035 series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm) depending on the application. The plug (= IP40), sealing ring and bellows (=IP54) ensure an increased degree of protection. Resetting can be performed by means of an optional integrated spring. Special voltage variants of the solenoid are also available on request. Due to its square design, particularly high forces and simple mounting characterize the high-performance linear solenoid. In addition, the strong solenoid convinces with short switching times and a long service life of up to 10 million switching cycles. The configuration options of the LHP035 are versatile. Nominal voltage:24 V Duty cycle:100 % Power consumption:23.78 W Stroke:10 mm Inital force:12.4 N End force:65 N Return spring:No Design:No  Protection class:IP 40 Thermal class:F 155 Connection:Leads / cable Solenoid weight:450 g Armature weight:110 g

Open frame solenoid as pull type solenoid with conical face armature. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area. Nominal voltage:24 V Duty cycle:100 % Power consumption:6.2 W Stroke:7 mm Inital force:0.7 N End force:7 N Return spring:No Design:No  Protection class:IP 00  Thermal class:E 130  Connection:10 cm lead  Solenoid weight:145 g Armature weight:25 g

Valvola a farfalla tipo LUG PN16, corpo in ghisa GJS400 + vernice epossidica, guarnizione in EPDM, scartamento secondo UNI EN 558 basic series 20. Limiti di temperatura:-10° +120°

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or pulling. In general, the stroke movement is from the stroke start to the stroke end position. The electromagnet is convincing in a wide range of applications with smallest space requirements and high forces. Depending on the area of application, the LHP035 can be optimally configured. The series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm). The plug (= IP40), sealing ring and bellows (=IP54) provide an increased degree of protection. The reset can be carried out by means of an optional integrated spring. Special voltage variants are also available on request. Benefits at a glance: high forces with small installation space, simple mounting due to square design, short switching times, low wear, 10 million switching cycles in long-term test, wide range of configuration options Nominal voltage:24 V Duty cycle:100 % Power consumption:23.78 W Stroke:15 mm Inital force:9 N End force:60 N Return spring:No Design:No  Protection class:IP 54 Thermal class:F 155 Connection:Leads / cable Solenoid weight:450 g Armature weight:110 g

High power solenoids of the LHS series are solenoids with strong holding forces. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The LHS high performance solenoids are available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:12.3 W Stroke:8 mm Inital force:8 N End force:25 N

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or pulling. In general, the stroke movement is from the stroke start to the stroke end position. The electromagnet is convincing in a wide range of applications with smallest space requirements and high forces. Depending on the area of application, the LHP035 can be optimally configured. The series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm). The plug (= IP40), sealing ring and bellows (=IP54) provide an increased degree of protection. The reset can be carried out by means of an optional integrated spring. Special voltage variants are also available on request. Benefits at a glance: high forces with small installation space, simple mounting due to square design, short switching times, low wear, 10 million switching cycles in long-term test, wide range of configuration options Nominal voltage:24 V Duty cycle:100 % Power consumption:23.78 W Stroke:5 mm Inital force:21.9 N End force:75 N

High power solenoids of the LHS series are solenoids with strong holding forces. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The LHS high performance solenoids are available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:185.2 W Stroke:60 mm Inital force:410 N End force:1300 N Return spring:No Design:No  Protection class:IP 00  Thermal class:F 155 Connection:Terminal box with/without cable  Solenoid weight:25000 g Armature weight:7000 g

Open frame linear solenoid as a thrust type solenoid. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:1.1 W Stroke:2 mm Inital force:0.03 N End force:0.25 N

Bistable linear solenoid with permanent magnetic support in open frame technology. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area. Nominal voltage:24 V Duty cycle:25 % Power consumption:9.5 W Stroke:4 mm Inital force:2,8 N End force:9 N Return spring:Yes  Design:Yes  Protection class:IP 00  Thermal class:E, 120  Connection:10 cm lead  Solenoid weight:46 g Armature weight:12 g

Avec un nombre de tours de 100000 tr/min-1 et un logement de broche élastique, vous obtenez une qualité de surface optimale pour un niveau sonore minimal. Pas de marques de vibration, même pour les travaux d'ébavurage les plus précis. Le TVD 3-100/3 ULTRA se distingue par des roulements hybrides spéciaux (acier/céramique), qui permettent une amélioration significative de la durée de vie dans presque tous les domaines d'application. Actionnements:pneumatique Autres caractéristiques:droite,de précision,échappement avant,pour ébavurage

Valvola a farfalla tipo WAFER PN16, corpo in ghisa GJL250 + vernice epossidica, guarnizione in NBR, scartamento secondo UNI EN 558 basic series 20. Limiti di temperatura:-10° +85°

Rotary solenoid in cylindrical design with shafts on both sides and return spring. This preferred type is available in small quantities from stock. Further rotation angle, shaft types or other voltages are available on request. You will find more information in the download area. Design:monostable  Rotation angle:45°  Inital torque:3.6 Ncm End torque:9.3 Ncm Return mechanism:Spring return  Housing type:round  Nominal voltage:24 V Duty cycle:100 % Power consumption:10 W Thermal class:B 130 °C  Connection:Leads 20 cm  Dimensions:Diameter 50 / Length 35 mm  Solenoid weight:380 g Dynamic moment of inertia:1.8 x 10^-6 kg m^2 

Valvola a farfalla tipo LUG PN16, corpo in ghisa GJS400 + vernice epossidica, guarnizione in NBR, scartamento secondo UNI EN 558 basic series 20. Limiti di temperatura:-10° +85°

The Reversible Linear Solenoid LHR090 is characterized by high performance. It is delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The reversing solenoid is available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:52 W Stroke:25 mm Inital force:73 N End force:270 N Return spring:No  Design:No  Protection class:IP 54  Thermal class:F 155  Connection:Plug  Solenoid weight:7600 g Armature weight:1400 g

The compact solenoid lock AL convinces with a very high static holding force. The solenoid door lock integrates a high-performance linear solenoid, which has bistable design. The bistable design enables that the door will be locked only if the solenoid is energized for a short time. In order to unlock, the solenoid needs to be energized for a short time as well. The polarity needs to be reversed. Usage of the locking:snap in / linear  Way of locking:active-locked / bistable  Nominal voltage:24 V V Duty cycle:10% ED % Power consumption:36 W W Max. static holding force:1600 N N Max. load force for electrical unlocking:400 N N Connection:Lead 18 cm  Snap-in function:Yes  Emergency opener:Yes  Operating temprature:0 - 80 °C  Dimensions:70 x 70 x 18 mm 

100.000 rpm and an elastic spindle support mean you achieve anoptimal surface quality when working on metallic materials. Noise emissions are also low. Thanks to the turbo drive it can be operated without lubrication (oil-free). No chatter marks also with finest deburring jobs. The TVD 3-100/3 ULTRA is distinguished by special hybrid bearings (steel/ceramic), which lead to a significant improvement of the service life in almost all application areas. Operation:pneumatic Other characteristics:straight,precision,front exhaust,for deburring

Rotary solenoid in cylindrical design with shafts on both sides and return spring. This preferred type is available in small quantities from stock. Further rotation angle, shaft types or other voltages are available on request. Design:monostable  Rotation angle:45°  Inital torque:0.18 Ncm End torque:0.44 Ncm Return mechanism:Spring return  Nominal voltage:24 V Duty cycle:100 % Power consumption:3.8 W Thermal class:B 130 °C  Connection:Leads 20 cm 

Roller inductors are used in the production of synthetic fibres or in embossing processes in the graphics industry. Different roll diameters can be applied and one or more axial heating zones can be realised depending on the requirements. An essential advantage of the roller inductors is the contactless energy transfer to the rotating roller. ; Roller inductors from 60mm diameter; No slip rings required; Divided into independently controllable axial segments; Optimal temperature control & uniform heating; Emission-free heating Operating power:up to 6,5 kW / Channel  Maximum heating temperature:250°C 

Disponibile con leva di ritorno a molla.

Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. Nominal voltage:24 V Duty cycle:100 % Power consumption:50 W Stroke:30 mm Inital force:100 N End force:450 N