Izdelki za ventil (1560)

Disponibile con leva di ritorno a molla.

Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. Nominal voltage:24 V Duty cycle:100 % Power consumption:50 W Stroke:30 mm Inital force:100 N End force:450 N

Bistable linear solenoid with permanent magnetic support in open frame technology. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. Stroke:2.5 mm Nominal voltage:24 V Duty cycle:15 % Power consumption:7.2 W Inital force:0,18 N End force:3.5 N Thermal class:E, 120 

Linear solenoid in enclosed design with maintenance-free armature bearing for maximum durability. Available as combi type solenoid, also with integrated return spring. Starting with size RM040 of the modular system, the heavy duty solenoids are available in a wide range of specifications, including splash-proof models. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area. Nominal voltage:24 V Duty cycle:100 % Power consumption:20 W Stroke:10 mm Inital force:13 N End force:25 N Return spring:No  Design:No  Protection class:IP 40/65  Thermal class:F, 155  Connection:20 cm lead  Solenoid weight:610 g Armature weight:200 g

CNC machining assemblies.

MOD. VB110M

Valvola a sfera flangiata PN16 in ghisa ENGJL-250 verniciata, a passaggio totale da DN 25 a DN 200, scartamento secondo norma EN 558 basic serie 14 (DN 200 basic serie 27). Limiti di temperatura:-10° +120° Vuoto:10-3 torr

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or pulling. In general, the stroke movement is from the stroke start to the stroke end position. The electromagnet is convincing in a wide range of applications with smallest space requirements and high forces. Depending on the area of application, the LHP035 can be optimally configured. The series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm). The plug (= IP40), sealing ring and bellows (=IP54) provide an increased degree of protection. The reset can be carried out by means of an optional integrated spring. Special voltage variants are also available on request. Benefits at a glance: high forces with small installation space, simple mounting due to square design, short switching times, low wear, 10 million switching cycles in long-term test, wide range of configuration options Nominal voltage:24 V Duty cycle:100 % Power consumption:23.78 W Stroke:20 mm Inital force:7.4 N End force:45 N Return spring:No Design:No  Protection class:IP 54 Thermal class:F 155 Connection:Leads / cable Solenoid weight:450 g Armature weight:110 g

100.000 rpm and an elastic spindle support mean you achieve anoptimal surface quality when working on metallic materials. Noise emissions are also low. Thanks to the turbo drive it can be operated without lubrication (oil-free). No chatter marks also with finest deburring jobs. Operation:pneumatic Other characteristics:straight,precision,front exhaust,for deburring

Pneumatic timers are used for the precise time control of pneumatic signals in pneumatic circuits or systems. The pressure-independent function of time delay starts when pressure is applied to the control port. After the pre-selected time is elapsed, an internal 3/2 way valve is switched. The pneumatic timer is reset to the initial condition if the control port is vented for at least 300 ms. The adjustable time delay depends on the chosen version and amounts between 0.5 and 180 s. Due to its design the control pressure level must not be below working pressure level. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID. Time intervall:0.5 - 60 s  Function:3/2-way NC  Pressure range:1.5 - 8 bar Type of pneumatic connection:1/8 NPT  Product type:Timer  Mounting:Subplate  Medium:Compressed air, non lubricated  Ambient temperature:-10 ... +60 °C

Bomba de acero inoxidable para barril con tubo de descarga con llave de paso en acero inoxidable y PTFE, eléctricamente conductiva. La bomba Bürkle para barril fabricada en acero inoxidable (1.4301) es la solución ideal para el trasiego de líquidos combustibles e inflamables. La bomba para barriles es eléctricamente conductiva, pero sin embargo, en combinación con el kit antiestático, cumple las normas de seguridad para la manipulación de líquidos inflamables. Las juntas de PTFE garantizan un uso duradero y sin mantenimiento. La potencia de succión de la bomba depende de la longitud de la misma, aprox. de 9 a 22 l/min. La amplia gama de accesorios permite adaptar la bomba para barriles a las condiciones más diversas. Profundidad de inmersión:36 cm, 57 cm o 91 cm Longitud total:48 cm, 69 cm o 103 cm Potencia de succión:190 ml/carrera de émbolo, 330 ml/carrera de émbolo o 540 ml/carrera de émbolo

Surface mount inductors are used for heating processes in the food industry, in packaging machines or in embossing processes in the graphics industry. The material thickness of the heated tools can be reduced due to the surface energy input. This increases the dynamics of the process and saves energy. Operating power:up to 6,5 kW / Channel  Maximum heating temperature:250°C 

Open frame solenoid as a combi type solenoid with integrated return spring. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area. Nominal voltage:24 V Duty cycle:100 % Power consumption:5.2 W Stroke:5 mm Inital force:1 N End force:3.5 N Return spring:Yes  Design:No  Protection class:IP 00  Thermal class:B 130  Connection:10 cm lead  Solenoid weight:90 g Armature weight:17 g

The compact solenoid lock SL convinces with a very high static holding force. The solenoid door lock integrates a high-performance linear solenoid, which has monostable design. The monostable design enables that the door can be locked every time when the solenoid is not energized. In order to unlock, the solenoid needs to be energized for a short time. Way of locking:self-locked / monostable  Nominal voltage:24 V V Duty cycle:10% ED % Power consumption:36 W W Max. static holding force:1600 N N Max. load force for electrical unlocking:400 N N Connection:Lead 18 cm  Snap-in function:Yes  Emergency opener:Yes  Operating temprature:0 - 80 °C  Dimensions:70 x 70 x 18 mm 

High power solenoids of the LHS series are solenoids with strong holding forces. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The LHS high performance solenoids are available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:185.2 W Stroke:60 mm Inital force:410 N End force:1300 N

Der Einspritzkühler Typ 5090 ist durch die Einbeziehung der Ventiltechnologie des Segmentplattenventils in der Lage, auf einfachste Weise Dampfdruck und Temperatur in Dampfnetz zu regeln. Mittels vier Einspritzdüsen und einer feinabgestimmten Wasserkonditionierung wird aus überhitzten Dampf Prozessdampf mit 3-20 K über der Sattdampftemperatur erzeugt. Anschlüsse: Anschluss Kühlwasser DN50; Anschluss Dampfleitung (Kühler) DN100 für Flansche nach DIN EN 1092-1 Form B Stellungsregler: Digitaler Stellungsregler Typ 8049; Stellungsregler mit integriertem Prozessregler Typ 8049 IPC; Stellungsregler Typ 8049 optional in explosionsgeschützter Ausführung; Stellungsregler mit Anbau nach NAMUR-Standard Nennweite:DN 50 Nenndruck:PN 40 - Große Regelspreizung durch 4-Düsensystem Werkstoffe:Edelstahl 1.4571 / 1.4408 Temperatur:-60 °C bis 220 °C Anwendung:Einspritzwasser zur Dampfkühlung

Valvola a farfalla tipo LUG PN16, corpo in ghisa GJS400 + vernice epossidica, guarnizione in EPDM, scartamento secondo UNI EN 558 basic series 20. Limiti di temperatura:-10° +120°

Mit einer Drehzahl von 100.000 min-1 und einer elastischen Spindellagerung erreichen Sie eine optimale Oberflächenqualität bei minimalem Geräuschpegel. Keine Rattermarken auch bei feinsten Entgratarbeiten. Betätigung:pneumatische Weitere Eigenschaften:gerade,Präzision,Frontausstoß,zum Entgraten

Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The reversing solenoids are available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:19 W Stroke:8 mm Inital force:10 N End force:25 N

Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The reversing solenoids are available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:50 W Stroke:30 mm Inital force:100 N End force:450 N Return spring:No Design:No  Protection class:IP 540 Thermal class:F 155 Connection:Plug Solenoid weight:12000 g Armature weight:1600 g

Linear solenoid in enclosed design with maintenance-free armature bearing for maximum durability. Available as combi type solenoid, also with integrated return spring. Starting with size RM040 of the modular system, the heavy duty solenoids are available in a wide range of specifications, including splash-proof models. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area. Nominal voltage:24 V Duty cycle:100 % Power consumption:20 W Stroke:10 mm Inital force:13 N End force:25 N Return spring:No Design:No  Protection class:IP 40/65 Thermal class:F 155 Connection:20 cm lead  Solenoid weight:610 g Armature weight:200 g

Valvola a farfalla tipo WAFER PN16, corpo in ghisa GJL250 + vernice epossidica, guarnizione in EPDM, scartamento secondo UNI EN 558 basic series 20 Limiti di temperatura:-10° +120°

Linear solenoid in enclosed design with maintenance-free armature bearing for maximum durability. Available as combi type solenoid, also with integrated return spring. Starting with size RM040 of the modular system, the heavy duty solenoids are available in a wide range of specifications, including splash-proof models. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area. Nominal voltage:24 V Duty cycle:100 % Power consumption:31 W Stroke:15 mm Inital force:33 N End force:105 N Return spring:Yes  Design:No  Protection class:IP 40/65 Thermal class:F 155 Connection:20 cm lead  Solenoid weight:2000 g Armature weight:400 g

The D-frame solenoid LCL is characterized by a compact design, low power consumption and short switching times. A long service life is promoted by the precision steel tube housing and maintenance-free armature bearings. The frame solenoid can be installed in any position, with the force preferably being applied in the axial direction only. It is fastened via threaded holes on the side or on the face. As standard, the frame linear solenoid has a chemically nickel-plated armature and a plastic-molded solenoid coil and has protection class IP 40. Versions with bellows achieve protection class IP54. Other voltages are possible on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:15.9 W Stroke:20 mm Inital force:9 N End force:20 N Connection:Leads / cable 

Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The reversing solenoids are available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:81.1 W Stroke:40 mm Inital force:170 N End force:570 N Return spring:No Design:No  Protection class:IP 540 Thermal class:F 155 Connection:Plug Solenoid weight:18500 g Armature weight:2500 g

Mw Multi Jet, Dry Dial, Direct Reading Water Meter

The D-frame solenoid LCL is characterized by a compact design, low power consumption and short switching times. A long service life is promoted by the precision steel tube housing and maintenance-free armature bearings. The frame solenoid can be installed in any position, with the force preferably being applied in the axial direction only. It is fastened via threaded holes on the side or on the face. As standard, the frame linear solenoid has a chemically nickel-plated armature and a plastic-molded solenoid coil and has protection class IP 40. Versions with bellows achieve protection class IP54. Other voltages are possible on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:26.7 W Stroke:25 mm Inital force:25 N End force:90 N Return spring:No Design:No  Protection class:IP 54 Thermal class:B 130  Connection:Plug Solenoid weight:2040 g Armature weight:410 g

Open frame solenoid as thrust type solenoid with conical face armature. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:5.2 W Stroke:5 mm Inital force:1 N End force:3.5 N

The Kuhnke CIO compact I / O connects various input and output signals in a compact housing for the DIN rail. The process data are made available via the CANopen interface according to the device profile CiA 401 of the higher-level control system. The robust design makes it suitable for use in machine and apparatus construction.;Compact control cabinet module; integrierte I/Os: 16DI/16DO/4AI-I/4AI-U/4AO-I/4AO-U/6Pt100/2Thermo; CANopen fieldbus interface Configuration:16DI/16DO/4AI-I/4AI-U/4AO-I/4AO-U/6Pt100/2Thermo  Function:I/O system with CANopen field bus  Product status:Standard product  Field bus interfaces:CANopen  Interfaces:CANopen  Digital I/Os (integrated):16 DI 5 ms, 16 DO 0,5A  Analogue I/Os (integrated):4AI-I, 4AI-U, 4AO-I, 4AO-U, 6Pt100, 2Thermo  Type of connection:multi-pin plug connector  Status indication:system messages  Housing material:aluminium tray with stainless steel cover  Dimensions (W x H x D):170 mm x 115 mm x 48 mm  IP-Protection Class:IP 20  Supply voltage:24 V (-20% / +25%)  Operating temperature:0 ... +55 °C 

Avec un nombre de tours de 100000 tr/min-1 et un logement de broche élastique, vous obtenez une qualité de surface optimale pour un niveau sonore minimal. Pas de marques de vibration, même pour les travaux d'ébavurage les plus précis. Actionnements:pneumatique Autres caractéristiques:droite,de précision,échappement avant,pour ébavurage