Izdelki za ventil (1211)

Linear solenoid in enclosed design with maintenance-free armature bearing for maximum durability. Available as combi type solenoid, also with integrated return spring. Starting with size RM040 of the modular system, the heavy duty solenoids are available in a wide range of specifications, including splash-proof models. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:5.5 W Stroke:4 mm Inital force:1.9 N End force:6 N

Volumen 90ml/min (50Hz) 15 Bar mit Sicherheitsventil. 100V 1/1.5A (50Hz) ÖL Levelschalter A-Kontakt (NO) ON bei low Level. Druckschalter A-Kontakt (NO) Type schließt bei 13 Bar öffnet bei 9 Bar. AC DC 250v/2A Laufzeit: MAX 1min. Min. Intervalzeit 3min. Viscosität 50-1300mm²/S (50Hz) 3L Tank externe Absicherung 100V/2,0A

These are the accessories used in valve fitting.

Reversible Linear Solenoids of the LHR series are characterized by high performance. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings coated with Teflon. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. Nominal voltage:24 V Duty cycle:100 % Power consumption:12 W Stroke:7 mm Inital force:6 N End force:18 N

The Kuhnke CIO compact I / O with CANopen fieldbus interface contains various digital and analog input and output signals in a compact housing for the DIN rail. The robust design allows the use in machine and apparatus construction. Function:I/O system with CANopen field bus Model:Control cabinet modul  Field bus interfaces:CANopen  Interfaces:CANopen Digital I/Os (integrated):8 DI 5 ms, 10 DO 0,5A Analogue I/Os (integrated):4AI-I, 4AI-U, 2AO-I, 3AO-U, 5Pt100, 2Thermo  Dimensions (W x H x D):170 mm x 115 mm x 48 mm  Supply voltage:24 V (-20% / +25%) 

Linear solenoid in enclosed design with maintenance-free armature bearing for maximum durability. Available as combi type solenoid, also with integrated return spring. Starting with size RM040 of the modular system, the heavy duty solenoids are available in a wide range of specifications, including splash-proof models. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area. Nominal voltage:24 V Duty cycle:100 % Power consumption:6.5 W Stroke:8 mm Inital force:3 N End force:7 N Return spring:Yes  Design:No  Protection class:IP 40 Thermal class:B 130  Connection:10 cm lead  Solenoid weight:235 g Armature weight:40 g

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or pulling. In general, the stroke movement is from the stroke start to the stroke end position. The electromagnet is convincing in a wide range of applications with smallest space requirements and high forces. Depending on the area of application, the LHP035 can be optimally configured. The series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm). The plug (= IP40), sealing ring and bellows (=IP54) provide an increased degree of protection. The reset can be carried out by means of an optional integrated spring. Special voltage variants are also available on request. Benefits at a glance: high forces with small installation space, simple mounting due to square design, short switching times, low wear, 10 million switching cycles in long-term test, wide range of configuration options Nominal voltage:24 V Duty cycle:100 % Power consumption:23.78 W Stroke:20 mm Inital force:7.4 N End force:45 N Return spring:Yes  Design:No  Protection class:IP 54 Thermal class:B 130  Connection:Leads / cable  Solenoid weight:450 g Armature weight:110 g

A mechanical rotary door lock in combination with powerful bi-stable solenoid, end position sensors for the closed and the locked position of the door, as well as central connectors and an emergency opener results in a highly compact unit. High-quality plastics contribute to increased mechanical stability and long product life even with high ambient temperatures Usage of the locking:Rotating lock / cam lock  Way of locking:active-locked / bistable  Nominal voltage:24 V V Duty cycle:2% ED % Power consumption:24 W W Max. static holding force:400 N N Max. load force for electrical unlocking:400 N N Connection:TE Connectivity VAL-U-LOK 1-2296207-0  Snap-in function:No  Emergency opener:Yes  Operating temprature:0 - 80 °C  Dimensions:174 x 70 x 32 mm 

The D-frame solenoid LCL is characterized by a compact design, low power consumption and short switching times. A long service life is promoted by the precision steel tube housing and maintenance-free armature bearings. The frame solenoid can be installed in any position, with the force preferably being applied in the axial direction only. It is fastened via threaded holes on the side or on the face. As standard, the frame linear solenoid has a chemically nickel-plated armature and a plastic-molded solenoid coil and has protection class IP 40. Versions with bellows achieve protection class IP54. Other voltages are possible on request. Nominal voltage:24 V Duty cycle:100 % Power consumption:13.4 W Stroke:10 mm Inital force:3.5 N End force:10 N Connection:Plug 

Le désurchauffeur de type 5090 est, grâce à l'intégration de la technologie de la vanne à plaque segmentée, capable de contrôler la pression et la température de la vapeur dans le réseau de vapeur de la manière la plus simple. En utilisant quatre buses d'injection et un conditionnement d'eau finement réglé, la vapeur de traitement est générée à partir de la vapeur surchauffée à 3-20 K au-dessus de la température de la vapeur saturée. Raccords Raccordement l‘eau de refroidissement DN50 Raccordement de la ligne à vapeur (refroidisseur) DN100 pour brides selon DIN EN 1092-1 Forme B Positionneur Positionneur numérique type 8049 Positionneur avec régulateur de processus intégré type 8049 IPC Positionneur type 8049 aussi en version antidéflagrante Montage du positionneur selon la norme NAMUR Taille::DN 50 Pression::PN 40 - Plage de contrôle énorme grâce à un système de 4 buses. Matériau::Acier inox 1.4571 / 1.4408 Température::-60 °C à +220 °C Application::Injection d'eau pour le refroidissement à la vapeur

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or pulling. In general, the stroke movement is from the stroke start to the stroke end position. The electromagnet is convincing in a wide range of applications with smallest space requirements and high forces. Depending on the area of application, the LHP035 can be optimally configured. The series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm). The plug (= IP40), sealing ring and bellows (=IP54) provide an increased degree of protection. The reset can be carried out by means of an optional integrated spring. Special voltage variants are also available on request. Benefits at a glance: high forces with small installation space, simple mounting due to square design, short switching times, low wear, 10 million switching cycles in long-term test, wide range of configuration options Nominal voltage:24 V Duty cycle:100 % Power consumption:23.78 W Stroke:5 mm Inital force:21.9 N End force:75 N Return spring:Yes  Design:No  Protection class:IP 54 Thermal class:F 155 Connection:Leads / cable Solenoid weight:450 g Armature weight:110 g

High power solenoids of the LHS series are solenoids with strong holding forces. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The LHS high performance solenoids are available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:26 W Stroke:12 mm Inital force:35 N End force:120 N Return spring:No  Design:No  Protection class:IP 54  Thermal class:F 155  Connection:Plug  Solenoid weight:1300 g Armature weight:250 g

High power solenoids of the LHS series are solenoids with strong holding forces. They are delivered with a horizontal characteristic curve. The armature is led on both sides with maintenance-free precision bearings. This results in a very high resistance to wear, granting consistent solenoid performance throughout a long service life. The LHS high performance solenoids are available in different versions. Nominal voltage:24 V Duty cycle:100 % Power consumption:32.9 W Stroke:15 mm Inital force:45 N End force:170 N Return spring:No Design:No  Protection class:IP 54 Thermal class:F 155 Connection:Plug Solenoid weight:2000 g Armature weight:400 g

El adaptador universal de la bomba para barril se adapta de forma estanca a aberturas de recipiente con un diámetro de 30-70 mm. Los racores de recipiente pueden acoplarse mediante la rosca de 3/4" y la contratuerca. La bomba para barril estanca al gas permite un trasiego sin olores. Al trasegar con bombas normales resulta inevitable que los vapores lleguen al entorno. Esto se evita con el desplazamiento del gas. Los vapores producidos se devuelven desde el recipiente de destino al de origen a través del conducto para el desplazamiento de gas. El conducto para el gas y el conducto del líquido están equipados adicionalmente con llaves de paso. Las bombas estancas al gas se utilizan para sustancias de olor intenso, tales como el amoniaco. Potencia de succión:200 ml/carrera de émbolo

Pneumatic timers are used for the precise time control of pneumatic signals in pneumatic circuits or systems. The pressure-independent function of time delay starts when pressure is applied to the control port. After the pre-selected time is elapsed, an internal 3/2 way valve is switched. The pneumatic timer is reset to the initial condition if the control port is vented for at least 300 ms. The adjustable time delay depends on the chosen version and amounts between 0.5 and 180 s. Due to its design the control pressure level must not be below working pressure level. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID. Time intervall:0.5 - 60 s  Function:3/2-way NC  Pressure range:1.5 - 8 bar Type of pneumatic connection:M5  Product type:Timer  Mounting:Subplate  Medium:Compressed air, non lubricated  Ambient temperature:-10 ... +60 °C

Open frame solenoid as pull type solenoid with conical face armature. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area. Nominal voltage:24 V Duty cycle:100 % Power consumption:6 W Stroke:8 mm Inital force:0.4 N End force:3.5 N Return spring:No  Design:No  Protection class:IP 00  Thermal class:B, 130  Connection:10 cm lead  Solenoid weight:85 g Armature weight:25 g

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or pulling. In general, the stroke movement is from the stroke start to the stroke end position. The electromagnet is convincing in a wide range of applications with smallest space requirements and high forces. Depending on the area of application, the LHP035 can be optimally configured. The series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm). The plug (= IP40), sealing ring and bellows (=IP54) provide an increased degree of protection. The reset can be carried out by means of an optional integrated spring. Special voltage variants are also available on request. Benefits at a glance: high forces with small installation space, simple mounting due to square design, short switching times, low wear, 10 million switching cycles in long-term test, wide range of configuration options Nominal voltage:24 V Duty cycle:100 % Power consumption:23.78 W Stroke:5 mm Inital force:21.9 N End force:75 N Return spring:Yes  Design:No  Protection class:IP 54 Thermal class:F 155 Connection:Leads / cable Solenoid weight:450 g Armature weight:110 g

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or pulling. In general, the stroke movement is from the stroke start to the stroke end position. The electromagnet is convincing in a wide range of applications with smallest space requirements and high forces. Depending on the area of application, the LHP035 can be optimally configured. The series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm). The plug (= IP40), sealing ring and bellows (=IP54) provide an increased degree of protection. The reset can be carried out by means of an optional integrated spring. Special voltage variants are also available on request. Benefits at a glance: high forces with small installation space, simple mounting due to square design, short switching times, low wear, 10 million switching cycles in long-term test, wide range of configuration options Nominal voltage:24 V Duty cycle:100 % Power consumption:23.78 W Stroke:5 mm Inital force:21.9 N End force:75 N Return spring:Yes  Design:No  Protection class:IP 54 Thermal class:B 130  Connection:Plug Solenoid weight:450 g Armature weight:110 g

Das elektromotorisch betätigte 2/2-Wege-Füllventil GEMÜ F60 ist für extrem genaue und schnelle Füllprozesse in aseptischen und hygienischen Anwendungsbereichen konzipiert. GEMÜ F60 ermöglicht eine Ansteuerung in Echtzeit, ultraschnelle Lastwechsel und hohe Durchflussmengen von bis zu 18.500 l/h. Das Dichtprinzip des Ventils beruht auf der GEMÜ PD-Technologie, wodurch der Antrieb vom Medium hermetisch getrennt ist. Alle Antriebsteile (die Dichtelemente ausgenommen) sind aus Edelstahl. Artikelnummer: GEMÜ F60

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate Nominal voltage:24 V Duty cycle:100 % Power consumption:1.5 W Holding force:300 N Design:Without base plate  Connection:terminal clamp 

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate Nominal voltage:24 V Duty cycle:100 % Power consumption:1.5 W Holding force:490 N Design:Wall mounting  Connection:terminal clamp 

The new Kuhnke Vico 04 series is a powerful display unit with an industrial design and enables modern operating concepts. The installed CODESYS PLC software package offers the possibility to use control functions in addition to visualisation. The visualisation is developed together with the PLC application in the free CODESYS Development System. The device communicates with the external fieldbus components via EtherCAT, OPC UA and Modbus. The Kuhnke Vico 04 series is based on a powerful ARM Cortex-A8 processor combined with a resistive touch display. All components are robust and have long-term availability. Configuration:HMI with control function  Function:HMI with control function  Model:Panel mounted device  Product status:Standard product  Display:4.3" wide  Resolution:480 x 272 (PSP)  Processor:ARM Cortex-A8 - 1 Ghz  Operating system:Linux  Software:CODESYS V3 Soft PLC, TargetVisu, WebVisu  Main memory:512 Non-volatile memory:Flash Data Memory:Flash Dive:Flash disk 4 GB  Interfaces:1 x Ethernet 10/100Mbit, 1 x RS-232, 1 x USB 2.0 host, max 500 mA Field bus interfaces:Modbus RTU, Modbus TCP, EtherCAT, OPC UA  Housing material:plastic body with black, seamless film cover Dimensions (W x H x D):107 x 147 x 34 mm  Supply voltage:24 VDC / (10 VDC … 32 VDC)  Temperature range:0 ... +55°C 

The robust OAC vibratory feeder coil series consists of a UI core and two excitation windings connected in series. Continuous controllability via drive voltage and/or frequency, high power ratings and optimally minimized eddy current losses characterize the electromagnet. The direction of oscillation is achieved by the geometric arrangement of the springs. The useful oscillation amplitude corresponds to twice the amplitude of the oscillation frequency of the overall system. OAC oscillating solenoids from Kendrion are used in spring mass systems to generate directional, linear oscillating movements. The vibratory feeder coil is available in 16 different sizes with universal mounting options and is supplied without a spring mass system. On request, the OAC series are also available with a base plate for mounting or a KTL coating for increased corrosion protection. Nominal voltage:230 V Apparent Power:15 VA Nominal air gap:2 mm Oscillating frequency:6000  Length:29 mm Width:42 mm Height:42 mm Dimensions:29,42,42  Thermal class:Y 90 

CODESYS Starterkit Control & Motion Easy positioning. The starter kit is fully wired and ready for use within minutes. In our download area, you can easily download a set of detailed examples explaining how to write your program and how to load it onto the control unit. Function:CODESYS Starterkit Control & Motion  Model:Ready to use functional unit  Integrated function:CODESYS V3 PLC with EtherCAT Expansion module 16DI/16DO, EtherCAT® motion controller for stepper and Software:CODESYS V3 Soft PLC, CODESYS , CODESYS WebVisu, Motion Control Library  Interfaces:LAN, RS-232, CAN, USB  Field bus interfaces:CANopen, Modbus RTU, Modbus TCP, EtherCAT, OPC UA  Product status:Standard product 

The controller is a fieldbus device for the control of up to 7 power modules from the modular heating System from Kendrion, which are directly connected via the module bus. In addition to system monitoring, the controller can also control or regulate the individual output channels of all power modules. Actual temperature values can be delivered directly via CAN fieldbus or provided by a higher-level controller e.g. a PLC. Functions:Temperature control, system monitoring, fieldbus communication, bus coupler for up to 7 MHS power mo Field bus interfaces:EtherCAT  Interfaces:1 x Ethernet 10/100Mbit (on request)  Modul bus:Data communication via CAN, electronic supply 24 VDC  Status indication:Heating system, EtherCAT, CANopen, DC power supply  Integrated I/Os:on request: 8 x DI: input delay: 3 ms / 8 x DO 24V, 0,5 A, Short circuit protection  Housing material:module made of steel with stainless steel cover for use in a closed, metallic control cabinet  IP-Protection Class:IP 20  Mounting:Prepared for left-side mounting on the power module  Dimensions (W x H x D):451 mm x 44 mm x 286 mm  Supply voltage:24 VDC / -10% +10% (21,6 V – 26,4)  Operating temperature:In vertical installation position: 0°C ... 35°C  Certifications:CE, cULus (in preparation) 

Based on our smallest rotary solenoid D1, Kendrion offers a compact miniature shutter in the field of optical safety technology. The D16 shutter is characterized above all by its high reliability and long service life of 2.5 million switching cycles. In addition, this shutter has a fast closing time of less than 20 ms. Rotation angle:65°  Return mechanism:Spring return  End position detection:No Housing type:round  Nominal voltage:12V DC V Duty cycle:100% ED % Power consumption:2,4 W W Thermal class:B (130 °C)  Connection:Wire 20 cm  Dimensions:Durchmesser 15 / Länge 20 mm  Switching time:≤ 20 ms ms Switching frequency:max. 5 Hz Hz

Holding magnet for holding or clamping ferromagnetic workpieces. The DC-excited coil achieves a holding force of up to 30,000 N when energized. When the supply voltage is switched off, the workpiece to be held falls off. The holding solenoid is maintenance-free and are characterized by a low operating current at high holding forces. The holding solenoid is available in different sizes in round, flat or square design. Nominal voltage:24 V Duty cycle:100 % Power consumption:2.2 W Holding force:112 N Diameter:20x15 mm

Holding magnet in round design for holding or clamping ferromagnetic workpieces. The DC-excited coil achieves a holding force of up to 30,000 N when energized. When the supply voltage is switched off, the workpiece to be held falls off. The holding solenoid is maintenance-free and are characterized by a low operating current at high holding forces. The holding solenoid is available in different sizes in round, flat or square design. Nominal voltage:24 V Duty cycle:100 % Power consumption:6.2 W Holding force:750 N Diameter:50x27 mm Thermal class:B 130  Connection:terminal clamp 

Based on the CDR030 bistable rotary solenoid, Kendrion offers a bistable shutter in the field of optical safety technology, which enables de-energized holding in both end positions. The end positions are held by the built-in permanent magnets. This makes the shutter design very energy-saving. The CDR030 shutter is also characterized by its high reliability and long service life of 20 million switching cycles. In addition, the shutter has a typical closing time of 20 ms. Rotation angle:60° / 90°  Return mechanism:Two end positions Nominal voltage:12V DC / 24V DC V Power consumption:30W / 24V DC 8W / 12V DC W Duty cycle:15% ED  Dimensions:30 x 30 x 57,7mm 

Flat gripper with a hard ferrite magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a 10 mm threaded socket with an internal thread. It is characterized by a force of 125 N. The diameter is 40 mm, the total height is 18 mm. Design:with threaded bush  Material:hard ferrite  Force:125 N Diameter:40 mm Height:8 mm Total height:18 mm Diameter threaded bush:10 mm Thread:M5  Weight:59 g Temperature:200 °C Housing:galvanized