Izdelki za ventil (1211)

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate Nominal voltage:24 V Duty cycle:100 % Power consumption:1.5 W Holding force:490 N Design:Without base plate  Connection:Free leads 

This EtherCAT I/O module has been specifically designed with industrial environments in mind. Its IP 65 protection allows its installation anywhere at the machine making switching cabinets and further housings more or less redundant. You may mount the unit directly on a base plate. Due to the modules integral plug connector system, sensors and actuators are never far away from the modules. Standardised cable connections reduce mounting times while enhancing the security of the wiring. The IP65 EtherCAT I/O modules are intended for mechanical & plant engineering applications also in conjunction with systems other than those supplied by Kendrion Kuhnke Automation. Function:EtherCAT I/O IP65 digital  Model:Sensor Aktor Modul IP66  Field bus interfaces:EtherCAT  Digital I/Os (integrated):4DI 1ms, 8DO 0,5A  Analogue I/Os (integrated):AI1/Thermo3  Type of connection:M12, M8 Snap-In  Dimensions (W x H x D):80 x 160 x 24 mm

Valve screw mechanical accessories.

Flat gripper with a neodymium magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a 8 mm threaded socket with an internal thread. It is characterized by a force of 140 N. The diameter is 20 mm, the total height of the flat gripper is 15 mm. Design:with threaded bush  Material:NdFeB  Force:140 N Diameter:20 mm Height:7 mm Total height:15 mm Diameter threaded bush:8 mm Thread:M4 Weight:17 g Temperature:80 °C Housing:galvanized 

The permanent holding magnets achieve a holding force of up to 35,000 N in the de-energized state and are designed for long holding of magnetic workpieces. When the DC-excited coil is switched on, the permanent magnetic field on the holding surface is neutralized and the workpiece to be held can be removed. The electromagnet holds loads even in the event of a power failure and only needs to be energized briefly to release the workpiece. It is characterized by its energy efficiency and high holding forces. The permanent holding solenoids are available in different sizes with forces between 8 and 3,500 N. Nominal voltage:24 V Duty cycle:100 % Power consumption:6.2 W Holding force:260 N Diameter:32x40 mm Thermal class:E 120  Connection:free leads 200mm 

Kann abwechselnd mit 2 Kreisen Zumessventilen und Progressivverteiler arbeiten Pumpe: Fördermenge 10ml/min Förderdruck 100bar (Überdruckventil) Leistung DC24V: Motor 20W/0.8A Pressure relief solenoid 26W/1.1A Total 46W/1.9A Einschaltzeit: Max. ON time: 7.5 min. Einschaltdauer: Max.25% (20°C) Medium Konsistenz: Cartridge Grease No.000,00,0,1 Erforderliches Fett MP0, FS2, MT1 Kartuschengrösse: 700ml cartridge Gewicht: 3.1kg (7C) Druckentlastung: eingebaut Pumpe:Fördermenge 10ml/min Einschaltzeit:Max. ON time: 7.5 min. Einschaltdauer:Max.25% (20°C) Medium Konsistenz:Cartridge Grease No.000,00,0,1 Erforderliches Fett MP0, FS2, MT1 Kartuschengrösse:700ml cartridge Gewicht:3.1kg (7C) Druckentlastung:eingebaut Artikelnummer:1028520

The Kuhnke CIO compact I / O combines various input and output signals on a PCB. The process data are transferred via the CANopen interface. The open and therefore low-cost version allows fast wiring and is predestined for the requirements in the apparatus construction. Function:I/O system with CANopen field bus Model:open circuit board for the control cabinet  Field bus interfaces:CANopen  Interfaces:CANopen  Digital I/Os (integrated):16 DI 5ms sourcing input / 16 DO 0,5A sinking output  Analogue I/Os (integrated):2AI, 2AO, 1Pt100  Type of connection:multi-pin plug connector  Dimensions (W x H x D):160 mm x 100 mm x 25 mm 

The Kuhnke FIO Controller 116 CNC is a PLC based on i.MX6 with integrated CODESYS PLC. In addition to the POUs made available in CODESYS SoftMotion, CODESYS SoftMotion CNC contains POUs for CNC functionality, different kinematic transformations with the appropriate visualization templates and the robotics axis group editor. It is able to exchange data with other systems via industrial Ethernet and RS232. In addition, a built-in SD-card slot and a USB-interface allow local storage of process data. An interrupt input allows realizing fastest possible reactions on specific process events. Configuration:CODESYS PLC + SoftMotion CNC + Robotics  Function:Modular PLC  Model:Control cabinet modul  Product status:Standard product  Processor:i.MX6 SoloX Freescale 1 GHz  Operating system:Linux RT Software:Softmotion CNC, Modbus TCP, OPC UA Server, WebVisu  Software options:Modbus RTU, OPC UA Server  Main memory:128  Non-volatile memory:128 kByte  Data memory:SD card  Drive:Flash memory  Interfaces:LAN, USB, CAN, RS-232, EtherCAT-E-Bus  Digital I/Os (integrated):1DI, 1 ms  Field bus interfaces:EtherCAT, CANopen, Modbus RTU and TCP  Modular expansion:Expandable with FIO I/O modules  Housing material:Aluminium frame, plastic housing  Dimensions (W x H x D):25 x 120 x 90 mm 

The Kuhnke Vico 04 series is a powerful indicator with an industrial design for the realisation of modern operating concepts. The installed CODESYS HMI software package offers the possibility to visualise data from one or more CDESYS controllers on a remote Kuhnke Vico 04. The visualisation is developed either independently or together with the PLC application in the free CODESYS Development System. The Kuhnke Vico 04 series is based on a powerful ARM Cortex-A8 processor combined with a resistive touch display. All components are robust and have long-term availability. Configuration:CODESYS HMI  Function:Touch Panel, CODESYS V3 HMI  Model:Panel front Built-in unit  Product status:Standard product  Display:7" wide  Resolution:800 x 480, WVGA  Processor:ARM Cortex-A8 - 1 Ghz  Operating system:Linux  Main memory:512 MB  Drive:Flash Interfaces:1 x LAN, 1 x USB, 1 x RS-232/485/422  Housing material:Plastic with insert foil  Data memory:Flash disk 4 GB  Dimensions (W x H x D):187 x 147 x 34 mm  IP-Protection Class:IP 66 / IP 20  Supply voltage:24 VDC / (10 VDC … 32 VDC)  Temperature range:0 ... +55°C 

The new Vico MT series is a powerful display unit with multi-touch technology in an industrial-grade unit design. The installed CODESYS HMI software package makes it possible to visualise data from any CODESYS controller(s) on the remote Vico MT. The visualisation is developed either independently or together with the PLC application in the free CODESYS Development System. The devices with brilliant IPS display have a robust glass touch screen with an aluminium bezel and are prepared for easy installation in the control cabinet. All components are robust and have long-term availability. Configuration:CODESYS HMI  Function:Multi-Touch Panel, CODESYS V3 HMI  Model:Panel mounted HMI  Product status:Standard product  Display:15.6" wide, IPS  Resolution:1366 x 768 / (16:9)  Processor:i.MX8M mini Quad-Core CPU; 4 x 1.6 GHz  Operating system:Linux  Main memory:1 GB  Drive:4 GB eMMC memory, 2 MB NOR Flash, µSD Slot  Interfaces:2 x LAN, 2 x USB, 1 x RS-232 Housing material:Aluminum frame with glass front  Data memory:Flash disk 4 GB  Dimensions (W x H x D):405 x 254 x 60 mm IP-Protection Class:IP 65 / IP 20  Supply voltage:24 VDC (± 20 %)  Temperature range:0 ... +55°C 

The Kuhnke FIO Controller 116 is a PLC based on i.MX6 with integrated CODESYS PLC. It is able to exchange data with other systems via industrial Ethernet and RS232. In addition, a built-in SD-card slot and a USB-interface allow local storage of process data. An interrupt input allows realizing fastest possible reactions on specific process events. As far as mechanic properties and form factor are concerned, the controller matches the FIO I/O modules, which can be attached directly to form a mechanically and electrically homogenous unit. Using an additional extender module also the control of remote EtherCAT slaves is possible. It can be easily integrated by the number of interfaces (Industrial Ethernet, RS232, CAN) and supported systems into existing control concepts. ; Fanless ARM processor technology; To be extended with FIO modules; CODESYS V3 with EtherCAT®; Optional: CODESYS SoftMotion Configuration:CODESYS PLC  Function:Modular PLC  Model:Control cabinet modul  Product status:Standard product  Processor:i.MX6 SoloX Freescale 1 GHz  Operating system:RT Linux  Software:CODESYS V3  Software options:Softmotion light, Modbus TCP, OPC UA Server, WebVisu  Main memory:128  Non-volatile memory:128 kByte  Data memory:SD card  Drive:Flash memory  Interfaces:LAN, USB, CAN, RS-232, EtherCAT-E-Bus  Digital I/Os (integrated):1DI, 1 ms  Field bus interfaces:EtherCAT, CANopen, Modbus RTU and TCP  Modular expansion:Expandable with FIO I/O modules  Housing material:Aluminium frame, plastic housing  Dimensions (W x H x D):25 x 120 x 90 mm 

With an EtherCAT master and two additional CANopen interfaces the new CODESYS control Scout from Kendrion can be used as a HMI and control unit. The simple CODESYS V3 programming ensures an efficient engineering. Furthermore, Scout has optionally 4 digital inputs and outputs. The embedded system is based on a scalable single or multicore i.MX6 processor technology combined with a TFT touch display. All components are robust and long-term available. Whether standard or customized the all in one solution is the better alternative in many devices and compact machines. ; The Scout series can be equipped with different software packages, please contact us for an individual offer. ; Industry standard interfaces ; Front with seamless film cover ; CODESYS V3, real-time clock Configuration:CODESYS panel PLC  Function:Touch Panel PLC  Model:Panel mounted device  Product status:Standard product  Display:12.1"  Resolution:800 x 600 (SVGA)  Processor:CPU Freescale i.MX6X Solo ; 1 GHz  Operating system:Linux RT  Software:CODESYS V3 Soft PLC, TargetVisu, WebVisu, Softmotion, SoftMotion CNC+Robotics  Main memory:512 MB RAM  Non-volatile memory:128 kB  Data memory:SD card  Drive:Flash disk 256 MB  Interfaces:2 x Ethernet 10/100/1000 MBit, 1 x RS-232, 1 x RS-485 galvanically isolated, 1 x CAN, 1 x CAN galvan Field bus interfaces:2 x CANopen, Modbus RTU, Modbus TCP, EtherCAT, OPC UA  Status indication:Power LED in the front, 4 x status on the back  Housing material:Aluminium with seamless film cover  Dimensions (W x H x D):320 x 265 x 54 mm  Status indication:Power LED in the front, 4 x status on the back 

The robust OAC vibratory feeder coil series consists of a UI core and two excitation windings connected in series. Continuous controllability via drive voltage and/or frequency, high power ratings and optimally minimized eddy current losses characterize the electromagnet. The direction of oscillation is achieved by the geometric arrangement of the springs. The useful oscillation amplitude corresponds to twice the amplitude of the oscillation frequency of the overall system. OAC oscillating solenoids from Kendrion are used in spring mass systems to generate directional, linear oscillating movements. Nominal voltage:230 V Apparent Power:19 VA Nominal air gap:1 mm Oscillating frequency:6000  Length:29 mm Width:42 mm Height:40 mm Dimensions:29,42,40  Thermal class:Y 90 

The Kuhnke FIO Controller 116 CNC is a PLC based on i.MX6 with integrated CODESYS PLC. In addition to the POUs made available in CODESYS SoftMotion, CODESYS SoftMotion CNC contains POUs for CNC functionality, different kinematic transformations with the appropriate visualization templates and the robotics axis group editor. It is able to exchange data with other systems via industrial Ethernet and RS232. In addition, a built-in SD-card slot and a USB-interface allow local storage of process data. An interrupt input allows realizing fastest possible reactions on specific process events. Configuration:CODESYS PLC  Function:Modular PLC  Model:Control cabinet modul  Product status:Standard product  Processor:i.MX6 SoloX Freescale 1 GHz  Operating system:Linux RT Software:CODESYS V3  Software options:Modbus RTU, OPC UA Server, WebVisu  Main memory:256  Non-volatile memory:128 kByte  Data memory:SD card  Drive:Flash memory  Interfaces:3 x LAN, USB, CAN, RS-232, EtherCAT-E-Bus, OPC UA  Digital I/Os (integrated):1DI, 1 ms  Field bus interfaces:EtherCAT, CANopen, Modbus RTU and TCP  Modular expansion:Expandable with FIO I/O modules  Housing material:Aluminium frame, plastic housing  Dimensions (W x H x D):42 x 120 x 90 mm 

These are the parts used in valves.

Für 6mm Leitungen ARTIKELNUMMER:5136280

Glass Y-branch pipes – 45° outer diameters:47.0 / 56.0 / 66.0 mm wall thickness:5.0 mm material:borosilicate glass 3.3

The fanless PLC with iMX6 Quad Core processor technology combines compactness with longevity and performance. The device has an integrated flash disk and an easily accessible SD card slot. USB interfaces allow the use of additional change-over memories or external peripherals. Kuhnke controllers with CODESYS SoftMotion CNC+Robotocs provide the user with extensive project planning options for his motion tasks. Among other things, certified motion modules according to PLCopen and the full scope of the IEC 61131-3 programming interface are available, as well as integrated motion planning with coordinate values for robot positions in different coordinate systems and numerous supported kinematics with convenient configuration, e.g. various gantry robots (2/3/5 axes), bipod/tripod robots, Scara robots. Configuration:CODESYS Compact PLC  Model:Control cabinet modul  Processor:Freescale i.MX6X Quad Core; 1 GHz  Operating system:Linux RT  Software:CODESYS V3 Soft PLC, WebVisu, Softmotion CNC+Robotics  Main memory:1024 MB RAM  Non-volatile memory:Stored in flash memory  Interfaces:EtherCAT, OPC UA, CANopen, Modbus TCP/RTU  Dimensions (W x H x D):50 x 190 x 115 mm 

Branch pipe with parallel outlets

The Kuhnke Vico 04 series is a powerful indicator with an industrial design for the realisation of modern operating concepts. The installed software package CODESYS HMI makes it possible to visualize data from one or several CDESYS controllers on a remote Kuhnke Vico 04. The visualization is developed either independently or together with the PLC application in the free CODESYS Development System. The Kuhnke Vico 04 series is based on a powerful ARM Cortex-A8 processor combined with a resistive touch display. All components are robust and long-term available. Configuration:CODESYS HMI  Function:Touch Panel, CODESYS V3 HMI  Model:Panel front Built-in unit  Product status:Standard product  Display:4.3" wide  Resolution:480 x 272, PSP  Processor:ARM Cortex-A8 - 1 Ghz  Operating system:Linux  Main memory:512 MB  Drive:Flash Interfaces:1 x LAN, 1 x USB, 1 x RS-232/485/422  Housing material:Plastic with insert foil  Data memory:Flash disk 4 GB  Dimensions (W x H x D):107 x 147 x 34 mm  IP-Protection Class:IP 66 / IP 20  Supply voltage:24 VDC / (10 VDC … 32 VDC)  Temperature range:0 ... +55°C 

Kendrion Kuhnke Automation relies on CODESYS as a software platform for a wide variety of applications in the automation industry. For all Kuhnke platforms, this software is available as release CODESYS V3. The IEC 61131-3 programming system offers IEC 61131-3 editors (FBD, LD, IL, ST, SFC), comprehensive debugging and online functions to optimise the application code, as well as fieldbus configurators and editors to generate visualisations. Single and multi-axis motion control all the way to the writing of curves can be projected within the well-known IEC 61131-3 development platform together with all related logic applications. Summing it up it can be said that the tool offers the user an integrated solution to support him in his everyday work and is tailored to offer real-life support to accomplish his tasks. ; EC 61131-3 programming tool for industrial control and automation technology; Integrated visualisation editor; Numerous security features (source code, communication, ...) Product status:Technology  Application:Programming PLCs fully compliant with the 3rd Edition of the IEC 61131-3 Standard in all available e Provision:Download on CODESYS Store International website  Requirements:Windows 8.1 / 10 / 11 

Holding magnet for holding or clamping ferromagnetic workpieces. The DC-excited coil achieves a holding force of up to 30,000 N when energized. When the supply voltage is switched off, the workpiece to be held falls off. The holding solenoid is maintenance-free and are characterized by a low operating current at high holding forces. The holding solenoid is available in different sizes in round, flat or square design. Nominal voltage:24 V Duty cycle:100 % Power consumption:90 W Holding force:3000 N Design:round Diameter:250x80 mm Holding permanentmagnetic?:no Thermal class:B 130 Connection:cable 300mm

The permanent holding magnets achieve a holding force of up to 35,000 N in the de-energized state and are designed for long holding of magnetic workpieces. When the DC-excited coil is switched on, the permanent magnetic field on the holding surface is neutralized and the workpiece to be held can be removed. The electromagnet holds loads even in the event of a power failure and only needs to be energized briefly to release the workpiece. It is characterized by its energy efficiency and high holding forces. Nominal voltage:24 V Duty cycle:100 % Power consumption:6.2 W Diameter:32x40 mm Thermal class:E 120 

The robust OAC vibratory feeder coil series consists of a UI core and two excitation windings connected in series. Continuous controllability via drive voltage and/or frequency, high power ratings and optimally minimized eddy current losses characterize the electromagnet. The direction of oscillation is achieved by the geometric arrangement of the springs. The useful oscillation amplitude corresponds to twice the amplitude of the oscillation frequency of the overall system. OAC oscillating solenoids from Kendrion are used in spring mass systems to generate directional, linear oscillating movements. Nominal voltage:230 V Apparent Power:480 VA Nominal air gap:3 mm Oscillating frequency:3000 Length:56 mm Width:90 mm Height:88 mm Dimensions:56,90,88  Thermal class:Y 90 

The new Kuhnke Vico 04 series is a powerful display unit with an industrial design and enables modern operating concepts. The installed CODESYS PLC software package offers the possibility to use control functions in addition to visualisation. The visualisation is developed together with the PLC application in the free CODESYS Development System. The device communicates with the external fieldbus components via EtherCAT, OPC UA and Modbus. The Kuhnke Vico 04 series is based on a powerful ARM Cortex-A8 processor combined with a resistive touch display. All components are robust and have long-term availability. Configuration:HMI with control function  Function:HMI with control function  Model:Panel mounted device  Product status:Standard product  Display:10.1" wide  Resolution:1024x600, (WSVGA)  Processor:ARM Cortex-A8 - 1 Ghz  Operating system:Linux  Software:CODESYS V3 Soft PLC, TargetVisu, WebVisu  Main memory:512 Non-volatile memory:Flash Data Memory:Flash Dive:Flash disk 4 GB  Interfaces:1 x Ethernet 10/100Mbit, 1 x RS-232, 1 x USB 2.0 host, max 500 mA Field bus interfaces:Modbus RTU, Modbus TCP, EtherCAT, OPC UA  Housing material:plastic body with black, seamless film cover Dimensions (W x H x D):282 x 197 x 35 mm  Supply voltage:24 VDC / (10 VDC … 32 VDC)  Temperature range:0 ... +55°C 

The induction generator is designed to supply up to 4 induction coils (inductors) with a power of up to 7.5 kW each. The device operates on the three-phase mains with a voltage of up to 400 V and a frequency of 50/60 Hz. The mains current is rectified and fed to the DC link, from which the inductors are individually supplied. Functions:Integrated power measurement, short circuit detection, DC link monitoring, automatic frequency tunin Load type:specific induction coils (inductance 875 μH ± 150μH)  Number of channels:4 channels individually controllable  Operating power:4 x up to 7.5 kW, total peak power 30 kW, continuous power 26 kW  Operating frequency:2 ... 25 kHz, automatic operating point determination  Supply voltage:3 x 400 VAC +10% /-15%; 50/60 Hz; Network configuration TT or TN  Modul bus:Data communication via CAN, electronic supply 24 VDC  Cooling:Forced air cooling, power loss max. 350W  Mounting:Prepared for installation on cabinet mounting plates  IP-Protection Class:IP 20, Device for mounting in a closed, metallic control cabinet Dimensions (W x H x D):Book Size steel housing with stainless steel cover, (451 x 105 x 313)  Operating temperature:In vertical installation position: 0°C ... 35°C 

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate Nominal voltage:24 V Duty cycle:100 % Power consumption:1.5 W Holding force:490 N Design:Aluminium swivel head 450 mm floor mounting  Connection:terminal clamp 

Kuhnkes FIO Safety PLC is a module intended to expand EtherCAT networks. Acting as the FSoE master, it is able to address any FSoE slave including safety I/Os, motion controllers valve islands and other FSoE equipment. The Safety PLC meets the requirements of IEC 61508 SIL3 and DIN EN ISO 13849 PLe. CODESYS version 3.5SP8 or higher is used for programming. The CODESYS safety function modules have been certified previously thus considerably reducing the efforts of developing, verifying and approving a safety application. The main controller's CODESYS environment and the EtherCAT link are used for programming. Function:functional safety PLC  Model:Control cabinet module  Field bus interfaces:EtherCAT / Safety over EtherCAT (FSoE)  Software:CODESYS version 3.5 SP8 or higher  Status indication:LEDs allocated to the point of termination  Dimensions (W x H x D):25 x 120 x 90 mm 

Pumpe: Fördermenge 10ml/min Förderdruck 100bar (Überdruckventil) Leistung DC24V: Motor 20W/0.8A Pressure relief solenoid 26W/1.1A Total 46W/1.9A Einschaltzeit: Max. ON time: 7.5 min. Einschaltdauer: Max.25% (20°C) Erforderliches Fett: MP-0, MP-1,FS-2, MT-1 Medium Konsistenz: No.000,00,0,1 Kartuschengrösse: 700 cc Gewicht: 1.8kg Druckentlastung: eingebaut Pumpe:Fördermenge 10ml/min Einschaltzeit:Max. ON time: 7.5 min. Einschaltdauer:Max.25% (20°C) Erforderliches Fett:MP-0, MP-1,FS-2, MT-1 Medium Konsistenz:No.000,00,0,1 Kartuschengrösse:700 cc Gewicht:1.8kg Druckentlastung:eingebaut Artikelnummer:1027580

With an EtherCAT master and two additional CANopen interfaces the new CODESYS control Scout from Kendrion can be used as an HMI and control unit.The simple CODESYS V3 programming ensures an efficient engineering. Furthermore, Scout has optionally 4 digital inputs and outputs. The embedded system is based on a scalable single or multicore i.MX6 processor technology combined with a 7” to 15.6” TFT touch display. All components are robust and long-term available. Whether standard or customized the all in one solution is the better alternative in many devices and compact machines. The Scout series can be equipped with different software packages, please contact us for an individual offer. Configuration:CODESYS panel PLC  Function:Touch Panel PLC  Model:Panel mounted device  Product status:Standard product  Display:7" wide  Resolution:800 × 480 (WVGA)  Processor:CPU Freescale i.MX6X Solo ; 1 GHz  Operating system:Linux RT Software:CODESYS V3 Soft PLC, TargetVisu, WebVisu, Softmotion, SoftMotion CNC+Robotics Main memory:512 Non-volatile memory:128kb Data Memory:SD-card slot  Dive:Flash disc 256 MB  Interfaces:2 x Ethernet 10/100/1000 MBit, 1 x RS-232, 1 x RS-485 galvanically isolated, 1 x CAN, 1 x CAN galvan Field bus interfaces:2 x CANopen, Modbus RTU, Modbus TCP, EtherCAT, OPC UA  Status indication:Power LED in the front, 4 x status on the back  Housing material:Aluminium with seamless film cover  Dimensions (W x H x D):194 x 151 x 56 mm  Supply voltage:24 V DC (± 20%)