Rezultati za

Heat on - Nemčija

2.539 Podjetja

4 Izdelki

NANO HEAT

Nemčija

NANO HEAT, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Gospodinjske naprave, električne - uvoz-izvoz. Deluje tudi v panogah radiator panel, electrical heating systems, Wall-mounted infrared radiator. Sedež podjetja je v kraju Osnabrück, Nemčija.
HEAT WÄRMESYSTEME GMBH

Nemčija

HEAT WÄRMESYSTEME GMBH, je podjetje tipa Prodaja na debelo, ki deluje v panogi Plin in nafta - pridobivanje. Deluje tudi v panogah Voda - pridobivanje in distribucija, Pipe za sanitarije, Vodovodne instalacije, Ogrevanje, industrijsko - instalacije in oprema, Voda - pridobivanje in distribucija, Pipe za sanitarije, Vodovodne instalacije, Ogrevanje, industrijsko - instalacije in oprema. Sedež podjetja je v kraju Wiedemar, Nemčija.
FLEX HEAT GMBH

Nemčija

FLEX HEAT GMBH, je podjetje tipa Agent/ Zastopnik, ki deluje v panogi Ogrevanje, industrijsko - instalacije in oprema. Sedež podjetja je v kraju Dusseldorf, Nemčija.
HEAT GMBH

Nemčija

HEAT GMBH, je podjetje tipa Ponudnik storitev, ki deluje v panogi Računalništvo - programska oprema. Deluje tudi v panogah Opremljene pisarne in industrijski prostori - storitve, Poslovodstvo - svetovanje, Komunikacija, Svetovanje v poslovnem komuniciranju, Opremljene pisarne in industrijski prostori - storitve, Poslovodstvo - svetovanje, Komunikacija, Svetovanje v poslovnem komuniciranju. Sedež podjetja je v kraju Königstein, Nemčija.
GRUPPE HEAT GMBH

Nemčija

GRUPPE HEAT GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Jeklo in kovine - obdelava in prevleka površin. Deluje tudi v panogah Peči in dimniki za industrijo, Peči za tempranje, Peči in dimniki za industrijo, Peči za tempranje. Sedež podjetja je v kraju Herzberg, Nemčija.

Stran za vaše podjetje

Ali vidite to? Tudi vaši potencialni kupci Pridružite se nam in postanite razpoznavni na europages.

Dodaj moje podjetje

HEAT NORD GMBH

Nemčija

HEAT NORD GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Izmenjevalniki toplote. Deluje tudi v panogah Klimatske, ozračevalne in prezračevalne naprave, Rekuperacija toplote - sistemi, Hladilna tehnika - oprema za trgovine in industrijo, Svetovalni biroji - visoka in nizka gradnja, Klimatske, ozračevalne in prezračevalne naprave, Rekuperacija toplote - sistemi, Hladilna tehnika - oprema za trgovine in industrijo, Svetovalni biroji - visoka in nizka gradnja. Sedež podjetja je v kraju Stäbelow, Nemčija.
HEAT WÄRMESYSTEME GMBH

Nemčija

HEAT WÄRMESYSTEME GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Zaključna dela. Deluje tudi v panogah Ogrevanje stanovanjskih zgradb - naprave in sistemi, Gretje, klimatizacija - dela, Ogrevanje stanovanjskih zgradb - naprave in sistemi, Gretje, klimatizacija - dela. Sedež podjetja je v kraju Weilheim, Nemčija.
ELBO-THERM GMBH & CO. KG

Nemčija

Elbo-therm GmbH & Co. KG is one of the largest manufacturers of infrared heating solutions in Germany and is run as a traditional family business. Whether at home, in your spare time, at work, drying out buildings or keeping animals – infrared heating systems from Elbo-therm can be implemented in many different areas. Our decorative infrared radiators save energy and space and are manufactured at our production site. Using our infrared technology as a complete or auxiliary heating system ensures a healthy indoor climate and saves energy. Advantages: Up to 50% lower procurement and heating costs in comparison to other heating systems. The heating output is almost 100% and stays at this level. Maintenance-free, no additional costs required for chimney sweeps or storage of oil and pellets, long service life, saves space, no emissions and does not disturb dust nor dry out the air.

Spletišče
HANS BERG GMBH & CO. KG

Nemčija

Perfection to detail is the key to a precise whole. That principle has consistently remained the company philosophy ever since it was first founded in 1950. Hans Berg GmbH & Co. KG is an internationally operating manufacturer of deep-drawn and metal tube components for a vast variety of industries. The Group has sites in Germany in Reichshof (headquarters) and Florstadt, and in Turkey in Dilovasi/Istanbul, employing a staff of roughly 600 people and specialising in cold-forming, joining, threading and cutting tool technology. Berg is the technological and market leader in the field of fittings and connections for radiators and convectors. Other important business sectors include heating, cooling and the automotive industry. As a development partner, Berg develops and manufactures high-precision and safety components for large and specialised suppliers in the automotive industry, for example applied within the fields of vibration damping and airbag gas generators.

Spletišče
ECOCHI GMBH

Nemčija

ECOCHI GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Toplotne črpalke, industrijske. Deluje tudi v panogah Heat pumps, Air water heat pumps, Fitting heat pumps, Manufacturing heat pumps, Installing heat pumps, Cooling technology, Heating technology, Air-conditioning technology, Ventilation technology. Sedež podjetja je v kraju Markt Schwaben, Nemčija.

R+L HYDRAULICS GMBH

Nemčija

R+L HYDRAULICS develops and manufactures a portfolio of high-quality components for fluid and drive technology that is both comprehensive and tailored to your requirements. Individual solutions for the most stringent demands in machinery, ship and vehicle construction, in the steel industry and offshore technology, and for special plant engineering applications, form an important part of your company's success. THE BENEFITS FOR YOU: Quality components on fair terms; improving your market share by taking advantage of our expertise in development, quality and service; direct, personal consultations with our Customer Service department; quick delivery through an optimised supply chain; project-specific development of our components to meet your individual requirements; shortening your response times: The FLUIDWARE APP sizing tool can help you calculate the design of an assembly, such as pump carriers, shaft couplings and accessories, immediately, based on your individual criteria.

Spletišče
THERMOTEC PRODUKTIONSGESELLSCHAFT MBH

Nemčija

Thermotec GmbH is a company specialising in equipment and machine manufacturing. We are involved in the heat recovery sector in particular. We focus our development and manufacturing on plate heat exchangers for heat exchange between two gas flows. The production of three-way process air valves is another of our focal points. In addition to these main fields, we also develop, design and manufacture a whole series of other products. The production process uses virtually exclusively stainless steel, preferably in the materials 1.4301, 1.4306, 1.4541, 1.4571, but also in other stainless steel qualities. With our currently available production area of 1740 m², partially equipped with machines with CNC control, PC workstations, CAD drawing stations and quality assurance implemented in accordance with ISO 9001, we are always one step ahead of the competition.

Spletišče

UNIVERSAL HYDRAULIK GMBH

Nemčija

Innovative systems determine the market of tomorrow. This is the principle which Universal Hydraulik has been following for more than 35 years when designing hydraulic systems, cooling systems, and heat exchangers, which are used all over the world in every field of application. Our heat exchangers are available as standard products, or can be specially customised to meet the requirements of your application. We use highly-precise software for our calculations, with drawings available in 3D. Our heat exchangers are tested up to five times during production. The cooling performance can be verified on our test rig. By purchasing one of our hydraulic and cooling systems, you'll be provided with a turnkey system from a single source. We design, manufacture, install and commission the complete system. All our systems are fully tested with regard to functionality and workmanship prior to delivery and are supplied with extensive documentation.

Spletišče
LUCHT LHZ ELEKTROHEIZUNG GMBH & CO.KG

Nemčija

Lucht LHZ Elektroheizung GmbH & Co. KG manufactures and distributes electric heating systems under its own name and as an OEM partner for international customers. Our product range includes surface storage heaters, night storage heaters, direct heaters, convectors, infrared heaters and bathroom heaters, among other products. Our products are manufactured at our sites in Hartmannsdorf and Burgstädt in eastern Germany. LUCHT LHZ is the innovative company in the field of future-oriented, emission-free and reliable electric room heating technology – Made in Germany. Our products meet all of the national and international requirements for modern heating systems. The fact that it is easy to connect our systems to electric power from renewable energy, in addition to our research and development findings, ensures that are top-quality products are at the forefront. This is what our customers all around the world have expected for over 30 years. We strive every day to continue this both now and in the future.

Spletišče
REINHARDT GMBH

Nemčija

Reinhardt GmbH is a medium-sized company with headquarters in Villingen-Schwenningen (Black Forest) and is one of the global market leaders for thermal engineering solutions up to 650 °C for the sectors of industrial ovens as well as heat treatment, coating and slush moulding systems. For Reinhardt, quality is the top priority. From the initial consultation to the finished project – our full attention is focused on our clients and their products. Our objective is to offer consultation on equal terms in every situation, enabling us to guarantee consistently high quality and meet practically all demands. Our decades of experience speak for themselves. This in-depth knowledge is reflected in every employee and significantly defines our business. Despite this, we never stay static. We are always developing our products further, allowing us to remain a global market leader.

Spletišče
RUDOLF UHLEN GMBH

Nemčija

The Rudolf Uhlen GmbH manufactures personal protective equipment (PPE) for various applications for more than 50 years. Mr. Volker Fiedler acquired the company in 1995. Under his management the company has grown steadily from an “one-man-operation” to an enterprise with 23 employees. A special focus of our production lies in the field of face- and eye-protection. Our standard product range covers the sectors visor carriers, head-gears, visors against mechanical and chemical impacts, gold-coated visors for IR-protection, arc-flash visors, heat-shields made of wire cloth and welding glasses. Besides this extensive standard product range we would like to provide practical solutions for the protective requirements in special working environments. We are willing to agree to individual requests of our customers. To provide the maximum customer satisfaction we focus on two principles: 1. The quality of the products has to be right. 2. There has to be a constructive communication with the customer.

Spletišče
FRIEDRICH WÜRTH PRODUKTIONS GMBH

Nemčija

Benefit from more than 65 years of experience. The company was founded in 1950 by Friedrich Würth with the corporate objective of producing and repairing heating elements for household devices, industrial applications as well as medical and laboratory technology. His successors have remained true to the original company objectives to this day. Today, his grandson Steffen Wolf runs the company in the tradition of its founder’s philosophy. You can benefit from the advantages of our location. The company headquarters of Friedrich Würth Produktions GmbH are located in Empfingen. The production site of Würth products is in the Czech Republic. The WoTech company belongs to the Würth company group. We would be happy to show you our product range on the following pages, which includes, in addition to electrical heating elements for various applications and ceramic heating plates, complete device and system component manufacturing.

Spletišče
APROVIS

Nemčija

APROVIS – innovation from a single source. APROVIS is an energy company that is active across the world. Our expertise focuses on exhaust gas and gas processing technology. We are experts in single components and system solutions. High quality and reliability have been important to APROVIS since it was founded in 2000. With an export ratio of over 50%, APROVIS is the only provider of system solutions in the CHP market for combustion gases of gas-powered engines and integrated solutions for cogeneration units – with its own products. APROVIS achieves extremely quick delivery times. We also personally support each project from planning to commissioning. We work strictly in accordance with applicable regulations and test standards, with the European Pressure Equipment Directive, ASME or EAC. APROVIS offers a wide range of products: For gas treatment, we offer FriCon gas cooling systems, ActiCo activated carbon filters, gas heat exchangers and compactors. The waste gas technology sector comprises waste gas heat exchangers, steam generators, catalysts (Oxi, three-way and SCR catalysts), diesel particulate filters and chimneys. High-temperature heat exchangers and leaking steam condensers are among special applications. APROVIS ensures a long service life for systems and devices thanks to maintenance, service and targeted spare part management. APROVIS means BETTER PERFORMANCE.

Spletišče
FRIEDRICH SCHULTZE GMBH

Nemčija

Schultze RiRo is a reliable partner in nearly all imaginable applications – we stand out thanks to the extraordinary stability and simple connection of their products. Our finned tube heaters protect your delicate systems against frost. Dirt, moisture or water jets and temporary flooding are not a problem for Schultze RiRos because these trade and industrial heaters fulfil all the criteria of protection class IP 66/67.

Spletišče
ASCENTEC GMBH

Nemčija

Our extensive experience in the design and construction of several thousand heaters ensures that our work is safe and routine. There has been a growing tradition of constructing heat transfer oil systems in the region around the district town of Wiesloch in Baden over the course of the last few decades. The "Wiesloch" design of these systems has become globally known for its brand and quality. The employees of Ascentec GmbH are all recognised specialists in the industry with many years of professional practice. Many of them come from the former company of "Apparatebau Wiesloch", a pioneer in heat transfer oil systems that is also rich in tradition. That's why it's not surprising that, despite being a young company, we nevertheless have decades of experience in the design, construction and implementation of thermotechnical systems. The choice of the headquarters of the Ascentec company in the industrial area of St. Leon-Rot, in the vicinity of Wiesloch, is not a coincidence either. We feel connected to the tradition of boiler construction that reigns here. Our heat transfer oil heater designs follow the globally known "Wiesloch" design that is valued for its reliability and high quality, and unite this with modern construction methods and insights. Our engineering expertise, in conjunction with close cooperation with selected suppliers and proven manufacturing and installation partners, ensures the consistently high quality and reliability of the products.

Spletišče

WWW.HORO.EU

Nemčija

HORO has been producing and distributing heating cabinets, drying ovens, ultra-drying ovens and humidification chambers since 1945. Whether you are looking for a small heating cabinet for the laboratory or a movable large chamber – our particular area of expertise is in manufacturing special solutions specifically designed for your application! The size of our heating cabinets and drying chambers varies between 20 litres (for example, for laboratory use) and large tunnels with very large volumes (for large chambers and through tunnels). The heating chambers can reach a maximum temperature of 650 °C and are fully lined with stainless steel. The drying process technology is continuously developed to provide improved drying results with considerably reduced energy consumption. We have incorporated Industry 4.0 into our range for many years. Our equipment controls are fitted with Ethernet connection, therefore enabling all possibilities for them to be connected and integrated all around the world.

Spletišče
LEIFERT INDUCTION GMBH

Nemčija

Leifert Induction GmbH develops and produces innovative inductive heating systems for joining and severing shrink joints and for pre-heating workpieces.

Spletišče
OHMEX INDUSTRIELLE ELEKTROWÄRME GMBH

Nemčija

OhmEx Industrielle Elektrowärme GmbH designs, and supplies customer-specific electric process heaters and electric switchboards for use in safe areas and explosion-protected zones according to ATEX and IECEx. These process heaters carry the CE marking in compliance with current CENELEC standards and comply with the applicable IEC standards. Our main areas of expertise and services are as follows: Consultation (feasibility study/economic viability study/quotation), planning (design planning/3D model/thermodynamic calculations/design testing), production (mechanical production/welding/electrical work/pressure tanks/acceptance, e.g. TÜV/final inspection), commissioning (documentation/personnel training). Together with our external production partner, Mainsite Technologies GmbH, we create the preconditions required for efficient, innovative and inexpensive product solutions. Top quality is our standard.

Spletišče
HEMSTEDT GMBH ELEKTROTECHNISCHE FABRIK

Nemčija

Dieter and Silvi Hemstedt founded their own company with the aim of manufacturing high-quality, specialised heating elements. It was a worthwhile endeavour: A few years later, a total of 20 employees were already working for the company, and sales and space requirements rapidly increased. The product range grew just as fast. Refrigeration technology came along and more and more customers demanded specialised solutions that Hemstedt could implement quickly and precisely. It was this flexibility and high quality that rapidly raised Hemstedt's profile all around the world. More and more frequently, deliveries from the Swabian production site travelled to China, the USA, Russia and many other countries. Today, more than 60 people work in development and manufacturing across a production space of 17, 500 square metres. Therefore, the company today particularly champions the development and manufacturing of energy-efficient heating systems and holistic concepts. These play a significant role in creating production facilities that are not simply climate-neutral, but actually make a positive overall contribution to the environment.

Spletišče
NOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE

Nemčija

Novelis is the leading manufacturer of flat-rolled aluminium products and the world's largest recycling company for aluminium. In close collaboration with our customers, we offer innovative solutions for manufacturers of drinks cans, automobiles and special products. Thanks to the global manufacturing and recycling capacities of our integrated network of modern roller and recycling facilities in North and South America, Europe and Asia, Novelis supplies consistently high-quality products all over the world. Our business activities focus on sustainability. This also influences our partnerships with stakeholders in the aluminium sector. The increasing use of lightweight, practical and always recyclable aluminium opens up new opportunities for us to help our customers to achieve their sustainability goals and to supply them with environmentally-friendly products in the expected quality.

Spletišče
ITG INDUKTIONSANLAGEN GMBH

Nemčija

ITG Induktionsanlagen GmbH is a member of the SYSTEC corporate group and one of the leading manufacturers in the field of induction heating systems. Aside from carrying out customer-specific tasks in both traditional and new induction technology applications, we also offer an expert service for our systems worldwide. Qualified specialists are available for your specific application and, in collaboration with you, can develop a system concept in accordance with your vision. Typical applications include hardening, smouldering, heating, smelting, tempering, forging, annealing and coating. We develop and produce our own power supply. Our range of converters in the medium and high frequency range cover 50 Hz to 1000 kHz with power outputs from 2 kW up to several megawatts. Energy efficiency, energy savings and global requirements regarding "Green Economy" are at the heart of converter technology.

Spletišče
INDUCTOHEAT EUROPE GMBH

Nemčija

Welcome to six decades of induction expertise. Inductoheat Europe – Your contact for all matters relating to induction heating and heat treatment. As part of the global Inductotherm Group, we are technology leaders in the inductive heating sector in Europe. We develop, produce and sell induction heating systems for a wide range of industrial applications at our main plant in Reichenbach. We manufacture standard and special hardening systems as well as inverters in large bandwidths. Inductoheat Europe also operates two contract hardening facilities in Reichenbach and Darmstadt, in which our customers have their small and large batches hardened. Our induction manufacturing plant produces these application-specific wear parts in original equipment quality and, if requested, at top speed.

Spletišče
BOSCH INDUSTRIEKESSEL GMBH - INDUSTRIAL BOILERS

Nemčija

Bosch Industriekessel GmbH, a company of the Bosch Home Comfort Group, , has been developing and manufacturing project-specific heating and process heat systems for more than 150 years. In keeping with its “Invented for life” principle, Bosch Industriekessel creates future-proof energy systems. The steam and hot water boilers increase the energy efficiency in production, buildings and district heating grids – by means of sustainable energy use and the seamless integration of Industry 4.0 applications. CO2-neutral heating and process heat solutions with hydrogen and electrification help pave the way to carbon-neutral heating. Around the world, Bosch Industriekessel customers are offered a universal product portfolio, as well as planning support, project management and after-sales services such as maintenance and 24/7 support – all from one source.

Spletišče
KELVION HOLDING GMBH

Nemčija

Kelvion is a global manufacturer of industrial heat exchangers for a highly diversified range of market segments. Since 1920, the company has manufactured and marketed its products throughout many and various markets – since November of 2015, under the new Kelvion brand. Its specialized professional competency, solidly-based expertise, customer proximity and multidimensional product portfolio make Kelvion the partner of choice in the field of heat exchange. With plate heat exchangers, shell and tube heat exchangers, finned-tube heat exchangers and refrigeration heat exchangers, the company supplies customers in highly diverse global sectors: energy; data center, chemical industries; marine applications; HVAC and refrigeration; environmental applications as well as the food and beverage industries. Kelvion is a specialist in providing customer-specific products and services and supports its target customers throughout a global sales, service and production network. Kelvion – Experts in Heat Exchange.

Spletišče
EMBRO GMBH

Nemčija

EMBRO GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Tehnični tekstil. Deluje tudi v panogah Sistemi za indukcijsko ogrevanje, Elektrotermika - stroji in material, Car seat heaters, Floor heating pads, Electrodes, medical, Surface heating elements (components), Foot warming mats, Band heaters, electrical, Electric heating elements. Sedež podjetja je v kraju Falkenstein, Nemčija.