Rezultati za

Pressure measurement - Uvoz izvoz

2.961 Podjetja

0 Izdelki

PPS (PRESSURE PROFILE SYSTEMS)

Združena Kraljevina

PPS (PRESSURE PROFILE SYSTEMS), je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Izdelava strojev - po naročilu. Deluje tudi v panogah Tipala tlaka, Merilne naprave in instrumenti, Merjenje in naravnavanje tlaka - aparati in instrumenti, Merilni in kontrolni instrumenti, sensors, Tipala tlaka, force sensors, Kapacitiva beröringssensorer, tactile sensor. Sedež podjetja je v kraju Glasgow, Združena Kraljevina.
MIKRO-MESS-GESELLSCHAFT MIT MESSTECHNIK FÜR DEN UMWELTSCHUTZ M.B.H.

Nemčija

MIKRO-MESS-GESELLSCHAFT MIT MESSTECHNIK FÜR DEN UMWELTSCHUTZ M.B.H., je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Senzorji. Deluje tudi v panogah Manometri, differential pressure switches, Differential pressure regulators, differential pressure switches, Pressure gauges for gaseous media, Pressure measuring and control equipment, electronic, pressure sensors, Electronic control units for dust filters, Manometri. Sedež podjetja je v kraju Lehrte, Nemčija.
KELLER PRESSURE

Švica

KELLER – A market leader in the production of isolated pressure transducers and transmitters KELLER Pressure was established in 1974 by Hannes W. Keller, the inventor of the integrated silicon measuring cell. Today, his sons Tobias and Michael Keller run the business. The company is wholly family-owned and employs 480 staff. KELLER feels a strong connection to its home of Switzerland. Its headquarters are where the value is added and where most of our employees work. As a result, all KELLER products bear the quality seal 'Made in Switzerland' and embody the Swiss values of quality, functionality and reliability. KELLER Druckmesstechnik AG, including KELLER Gesellschaft für Druckmesstechnik mbH in Jestetten, is certified to ISO 9001. This means that our measured values can be fully traced to national standards. As a company that operates on an international scale, KELLER is represented at a number of locations around the globe. Because we are committed to offering the best service to our customers, you will always receive advice in your local language. KELLER has ten branches in Europe, Asia, South America and the USA. Various representatives and distributors also support our branches in other countries.

Spletišče
METALLUX AG

Nemčija

Metallux AG is a global developer and manufacturer of sensors in the field of thick-film technology. The extensive product portfolio ranges from pressure, travel and angles sensors through resistors to industrial joysticks for controlling vehicles and machines. For over 35 years, prestigious customers in the fields of vehicle construction, medical technology, energy and environmental technology, materials handling, lifting technology and mechanical engineering have relied on our combination of innovative products and tailor-made, customer-specific solutions – Made in Germany. Our range of services includes: Resistors: comprehensive range of high-voltage and power resistors. Power resistors in thick-film technology or as wire resistors. Joysticks: thumb, finger and hand joysticks for the drive and function control of vehicles, construction machinery and boats, in the fields of materials handling and medical technology and for use in wireless remote controls. Pressure sensors: from pressure measuring cells in ceramics and stainless steel to pressure transmitters. Travel and angle sensors: film sensors, potentiometers and potentiometer elements for position determination in drives, systems and machines. We supply a wide range of sectors and enjoy extensive application know-how. We are happy to develop tailor-made solutions following an individual and personal consultation. Our products are all made in Germany: from samples to large-scale production of several hundred-thousand pieces.

Spletišče
BDSENSORS GMBH

Nemčija

BD|SENSORS was founded in 1994 as a start-up by three people and within a few years it evolved into one of the most important suppliers of electronic pressure measurement equipment in the global market. The company’s head office is located in Thierstein, Upper Franconia, Germany. Today, around 250 employees work at its four locations in Germany, the Czech Republic, Russia, and China. Right from the outset, the company has focused on electronic pressure measurement technology. With a consistent product and quality strategy, it has succeeded in developing a high-quality product range that sets standards both in terms of breadth and production depth in the global market. The range comprises solutions for pressure and level measurement in a measurement range of from 0.1 mbar to 8000 bar. BD|SENSORS greatly values close links to its customers and positions itself as a provider of solutions in the industry.

Spletišče

Stran za vaše podjetje

Ali vidite to? Tudi vaši potencialni kupci Pridružite se nam in postanite razpoznavni na europages.

Dodaj moje podjetje

RIEGLER & CO.KG

Nemčija

RIEGLER is a company in the best German can-do tradition. With a history that goes back 85 years and guarantees real continuity, the company brings performance and aspiration down to earth and to you. Whatever the requirements of your compressed air system and your pneumatic application, we’ll have answers for you here. Are you looking for high-performance products or individual technical solutions? RIEGLER has them. This is where customer focus becomes customer understanding. You can learn a trade or study an academic subject, but after the how-to invariably comes the to-do: applying what you have learned, combining skills and solving problems in advance. In short, it’s about being “simply that bit better”. And that’s precisely what RIEGLER stands for. DISCOVER THE WORLD OF COMPRESSED AIR TECHNOLOGY AND PNEUMATICS.

Spletišče
B + B THERMO-TECHNIK GMBH

Nemčija

Since 1984, B+B Thermo-Technik gas been developing and producing innovative product and industry solutions with the highest quality standards for precise measuring jobs. Benefit from our many years of experience and expertise. We are based in the town of Donaueschingen in the south-west of Germany. From here, our quality products are distributed all around the world. The latest technologies in research, development and manufacturing and our certifications in accordance with DIN EN ISO 9001: 2015 and DIN EN 61340-5-1 mean that we produce our products to the highest quality standards. We also provide our customers with test certificates and DAkks (the German national accreditation body). calibration certificates. Quality and proximity to customers are integral parts of our strategy. This is why we predominantly manufacture in Germany and at fully owned subsidiaries all over the world. We guarantee continual quality controls, flexible responses to customer requests and modifications, as well as timely deliveries.

Spletišče
INOTECH METER CALIBRATION SYSTEMS GMBH

Nemčija

Over the last 25 years, inotech GmbH has developed into a leading manufacturer of test equipment for gas meters, testing facilities and calibration facilities and has a reputation as an expert and reliable partner for meter manufacturers and independent test centres throughout the world. In the last few years, we have also established ourselves in the water meter and heat meter test equipment area, thus adequately expanding our product range. Millions of different types of meters and counters are calibrated using our test equipment every year. Test equipment is our core business. Every day, we combine our expertise with our customers' requirements in order to continuously improve our products. In this way, we always have our customers in focus during the entire product development and production process and are always up to date with current developments.

Spletišče
MELUTEC METROLOGY GMBH

Nemčija

Our calibration laboratory is accredited according to DIN EN ISO/IEC 17025 by DAkkS (Deutschen Akkreditierungsstelle GmbH [German Accreditation Body]) for measuring the parameters of length, torque, temperature, relative humidity and scales under register number D-K-15048-01-00. As an accredited DAkkS calibration laboratory, we comply with the requirements of all national and international standards. We don't just want to satisfy our customers; we want to inspire them. Since the company was founded in 1991, we have expanded to offer a variety of services and are currently continuously developing in this sector. We have extensive experience in calibration technology. Customers in Germany and around the world benefit from our knowledge and flexibility. See Melutec Metrology for yourself and you will discover why our expertise, flexibility and innovation put us head and shoulders above the competition.

Spletišče
KENDRION KUHNKE AUTOMATION GMBH

Nemčija

Kendrion Kuhnke Automation is your specialist for magnet, fluid and control technology and offers safe, precise and innovative components and assemblies for a wide range of applications. Kendrion Kuhnke Automation is part of the industrial division of Kendrion N.V. und trades under the Industrial Actuators and Controls (IAC) business unit. When it comes to developing and manufacturing electromagnets and actuators, IAC benefits from over 100 years of experience and offers a wide range of products. In addition, IAC is a fluid technology manufacturer specialising in the development of custom valves, valve blocks and pressure regulators. In the field of control technology, IAC uses the internationally recognised industry standards in order to enable integration into a wide variety of infrastructures, as well as inductive heating systems that enable emission-free heating in industrial processes. Our products are primarily used in medical equipment, such as dialysis machines, anaesthesia machines, respirators, dental units, treatment equipment and therapy equipment. They are also used in automation and robotics, such as for FTS, material handling systems and cobots. Furthermore, they are used for mechanical engineering in the food and drink industry, in printing and paper processing and in the textile industry. Further applications include fire protection and access controls in building technology and emergency oxygen supply and in-cabin applications in aviation. Find out more about Kendrion at www.kendrion.com

Spletišče

PETER HIRT GMBH

Švica

Peter Hirt linear ball bearings adapted to be play-free. The components of linear ball bearings, including shaft, ball cage and housing, are individually lapped and honed together in matched sets for each individual linear ball bearing. This ensures no stick-slip effect and maximum lifetime values. Peter Hirt thread gauge feelers are available from the smallest size of 0-200 (ball diameter 0.200 mm) up to size 12 (ball diameter 4.000 mm). The smallest thread gauge feeler at present, size 0-200 with a ruby ball diameter of 0.200 mm, is sized for measuring threads up to size M1.7. The thread gauge feelers are available individually or in a protective wooden box as a 12 pc, 13 pc or 14 pc set. Signal conditioning modules from Peter Hirt are specially calibrated for T-series tranducers with TESA® compatible half-bridge circuit. Modules are available with supply voltages of 5, 12 or 24 VDC and with a bipolar or unipolar output signal of ± 5 VDC, ± 10 VDC, 0-5 VDC, 0-10 VDC

Spletišče
TESTEM GESELLSCHAFT FÜR MESS UND DATENTECHNIK MBH

Nemčija

TESTEM GmbH is a reliable supplier of measurement data recording systems and devices. Our many years of experience, comprehensive expertise and goal-oriented approach to solutions have allowed us to manufacture high-quality devices and systems for recording and transmitting measurement data as well as for determining physical parameters in the sensor segment. Thus, we provide systems for fuel quantity measurement and closing force measurement as well as powerful telemetry systems, fuel injection monitoring systems and high-quality HF amplifiers. With our extensive knowledge, we have come to focus on areas such as contactless (radio) data transmission. For example, in the area of radio data transmission, we produce diversity receivers, wideband receivers and wideband transmitters that function as data transmitters. Additionally, we offer powerful measurement recording devices such as data loggers and single-stroke engines that are used to simulate different motor operating states.

Spletišče

VÖGTLIN INSTRUMENTS GMBH

Švica

Vögtlin is a Swiss company which develops precision flow rate devices. Our experts in flow rates have been developing high-quality products and solutions for your flow rate metering and controlling tasks for 30 years. Our thermal mass flow rate meters and mass flow rate controllers for gases, with digital and analogue output and IP67/NEMA6 and ATEX protection, are ideal for wide range or applications. This includes the areas of gas analysis, laboratory equipment, pharmaceuticals, biotechnologies, life sciences, research and development, testing equipment, OEM and many industrial applications and all-round solutions. Our high-precision flow rate meter and controller devices are built using MEMS semiconductors technology. With more than 300, 000 units sold, we are an internationally respected player in the market. Our OEM partners and customers require reliable quality and reproducible performance. As a company with ISO 9001: 2015 certification, we can guarantee compliance with the highest quality standards.

Spletišče
OPSYTEC DR. GRÖBEL GMBH

Nemčija

Opsytec Dr. Gröbel GmbH is a renowned manufacturer and provider of high-precision measuring equipment and radiation sources. Thanks to decades of experience in development and production, Opsytec provides innovative solutions for a wide range of applications in the fields of measuring equipment and light technology. The extensive product range includes UV lamps, UV measuring equipment, radiation detector and customer-specific systems used in fields such as material testing, environmental monitoring and medical technology. Opsytec places great emphasis on quality, reliability and precision, a fact that is reflected in the high level of customer satisfaction. The company also provides a comprehensive range of services, including calibration and consulting, to meet the specific requirements of its customers. Opsytec products are used in laboratories, research facilities and industries around the world and are characterised by their durability and excellent performance.

Spletišče
DELTAFLUID

Francija

DELTAFLUID, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Znanstvena oprema in instrumenti. Deluje tudi v panogah Merjenje in naravnavanje temprerature - aparati in instrumenti, Merjenje in naravnavanje izpuha in iztoka - aparati in instrumenti, Merilniki pretoka, Jeklo in kovine - strojna obdelava, Termometri, design office specialising in flow rate measurement, Merjenje in naravnavanje temprerature - aparati in instrumenti, Merjenje in naravnavanje izpuha in iztoka - aparati in instrumenti, Merilniki pretoka. Sedež podjetja je v kraju Lacq, Francija.
HÖNTZSCH GMBH

Nemčija

HÖNTZSCH GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Merjenje in naravnavanje izpuha in iztoka - aparati in instrumenti. Deluje tudi v panogah Eksplozijsko varna oprema, Merjenje in naravnavanje tlaka - aparati in instrumenti, Air flow meter, Calibration service, calibrating, Development of flow meters, Flow meter, Sensors for explosion protection areas, sensors. Sedež podjetja je v kraju Waiblingen, Nemčija.
HUBA CONTROL AG DEUTSCHLAND DEUTSCHLAND

Nemčija

HUBA CONTROL AG DEUTSCHLAND DEUTSCHLAND, je podjetje tipa Prodaja na debelo, ki deluje v panogi Merjenje in naravnavanje tlaka - aparati in instrumenti. Sedež podjetja je v kraju Walddorfhäslach, Nemčija.
KOBOLD MESSRING GMBH

Nemčija

KOBOLD MESSRING GMBH, je podjetje tipa Prodaja na debelo, ki deluje v panogi Merjenje in naravnavanje tlaka - aparati in instrumenti. Sedež podjetja je v kraju Hofheim Am Taunus, Nemčija.
BOURDON HAENNI GMBH

Nemčija

BOURDON HAENNI GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Manometri. Deluje tudi v panogah Termometri, Termometri, Pressure switches, differential pressure gauges, Diaphragm seals, Differential pressure switches, Pressure measuring technology, Temperature measurement instruments, Temperature switches. Sedež podjetja je v kraju Stockach, Nemčija.
BART

Italija

BART, je podjetje tipa Distributer, ki deluje v panogi Merjenje in naravnavanje tlaka - aparati in instrumenti. Deluje tudi v panogah Ventili za industrijske pipe, Manometri, Cevni zvezniki, železne kovine, Termometri, pressure regulators for measuring and precision instruments, Bourdon pressure gauge with capsule and membrane, temperature regulation and control instruments, Ventili za industrijske pipe, digital and analogue pressure gauges. Sedež podjetja je v kraju Milano, Italija.

DM-SENSORS INH. DARIUS MLOCEK

Nemčija

DM-SENSORS INH. DARIUS MLOCEK, je podjetje tipa Ponudnik storitev, ki deluje v panogi Merjenje in naravnavanje tlaka - aparati in instrumenti. Sedež podjetja je v kraju Liederbach, Nemčija.
KANT DRUCKSCHALTER GMBH

Nemčija

KANT DRUCKSCHALTER GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Merjenje in naravnavanje tlaka - aparati in instrumenti. Sedež podjetja je v kraju Dornhan, Nemčija.
OMCRON SENSORS ENVIRONNEMENT

Španija

OMCRON SENSORS ENVIRONNEMENT, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Laboratoriji - oprema in instrumenti. Deluje tudi v panogah Merjenje in naravnavanje tlaka - aparati in instrumenti, Merjenje in naravnavanje tlaka - aparati in instrumenti. Sedež podjetja je v kraju Alicante, Španija.
FIRST SENSOR AG

Nemčija

FIRST SENSOR AG, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Merjenje in naravnavanje tlaka - aparati in instrumenti. Deluje tudi v panogah Merjenje in naravnavanje izpuha in iztoka - aparati in instrumenti, liquid level measuring instruments, Merjenje in naravnavanje izpuha in iztoka - aparati in instrumenti, level sensors, Oxygen sensors. Sedež podjetja je v kraju Berlin, Nemčija.
AOIP SAS

Francija

AOIP SAS, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Termometri. Deluje tudi v panogah Izredno precizni merilniki, Merilna in regulacijska oprema in instrumenti - elektrika in druga energija, Merjenje in naravnavanje temprerature - aparati in instrumenti, Merjenje in naravnavanje tlaka - aparati in instrumenti, Izredno precizni merilniki, Merilna in regulacijska oprema in instrumenti - elektrika in druga energija, Merjenje in naravnavanje temprerature - aparati in instrumenti, Merjenje in naravnavanje tlaka - aparati in instrumenti. Sedež podjetja je v kraju Ris Orangis, Francija.
MANFRED JÜNEMANN MESS- UND REGELTECHNIK GMBH

Nemčija

MANFRED JÜNEMANN MESS- UND REGELTECHNIK GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Merjenje in naravnavanje tlaka - aparati in instrumenti. Deluje tudi v panogah Merjenje in naravnavanje temprerature - aparati in instrumenti, manometers, Merjenje in naravnavanje temprerature - aparati in instrumenti. Sedež podjetja je v kraju Bad Salzuflen, Nemčija.
ESI TECHNOLOGY LTD

Združena Kraljevina

ESI TECHNOLOGY LTD, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Merjenje in naravnavanje tlaka - aparati in instrumenti. Deluje tudi v panogah pressure sensors. Sedež podjetja je v kraju Wrexham, Združena Kraljevina.
SCHMIERER GMBH

Nemčija

SCHMIERER GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Merjenje in naravnavanje tlaka - aparati in instrumenti. Deluje tudi v panogah Manometri, Termometri, Manometri, differential pressure gauges, Termometri, pressure sensors. Sedež podjetja je v kraju Groß-Gerau, Nemčija.
AQUADUNA GMBH & CO. KG

Nemčija

AQUADUNA GMBH & CO. KG, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Merjenje in naravnavanje tlaka - aparati in instrumenti. Sedež podjetja je v kraju Sternenfels, Nemčija.
DUNTEC INH. GERD DUMKE

Nemčija

DUNTEC INH. GERD DUMKE, je podjetje tipa Prodaja na debelo, ki deluje v panogi Merjenje in naravnavanje tlaka - aparati in instrumenti. Sedež podjetja je v kraju Windeck, Nemčija.